PDA

View Full Version : Sold Brand New Turbo Card HC533 33MHZ 8MB RAM IDE for Amiga 500



sordan
26th June 2018, 10:56
1 pieces left till now.

Brand New Turbo Card HC533, MC68HC000 33MHz + Bootable IDE + 8MB Fast RAM for Amiga 500.

This turbo card will allow you to boot even from Workbench 1.3! You can boot your system from 1.3 or 3.1 Kickstart. You can boot between 2 ROMs (Oktapussy/Oktagon) and you can change this settings by using jumper on board (jumper included).

Processor MC68HC000 with 33 MHz clock, it will speed up your Amiga 500 a lot. Regarding to SysInfo V4.0 there is 3.51 MIPS (2.76 times faster than Amiga 1200 with 020 / 14 MHz)

There is 8MB Fast RAM included on board too.
There is 40 PIN IDE Male connector on board. You can connect CF to IDE adapter (IDE CF adapter included now as a gift) into that slot and you can boot your system from CF card (you dont need additional power for CF cards). You can also boot from real 40 PIN IDE hard drive but then you need to power your hardrive somehow.

Plug & Play turbo card. All you need to do is just remove MC68000 processor from your Amiga 500 motherboard (MC68000 processor module insterted is into slot on motherboard (you can easily remove it within seconds using for example flat screwdriver). No soldering at all.

Excellent IDE speed, regarding to SysInfo V4.0 our tested CF card as a hard drive speed was: 4.6MB/s! (IDE speed may be vary, depends which CF card are you using).

You can still use extra CHIP Ram from trapdoor expansion slot.
CF card from photos is not included.

Payment by Paypal or card only. No reservation.


Price: 127.95 EUR, included:
- Brand New HC533 Turbo Card
- Priority shipping worldwide (tracked + insurance for 150 EUR)
- Paypal fees.

Knecht
26th June 2018, 13:04
Interested :D

sordan
26th June 2018, 13:10
PM sent.

Knecht
26th June 2018, 13:21
Payment via PayPal done

sordan
26th June 2018, 13:23
Payment received with thanks. Card will be despatched today.

Retroheaven87
26th June 2018, 16:41
Interested Please :-)

sordan
26th June 2018, 18:30
Retroheaven87: PM sent with payment details. Thanks.

Kyle
26th June 2018, 22:43
Will this work on CDTV too?

sordan
27th June 2018, 08:04
Kyle: No.

a4Kuse
27th June 2018, 08:16
Will it work in the A1000?

Epongette
27th June 2018, 11:24
Declaring interest in 1 unit thanks

sordan
27th June 2018, 12:15
Epongette: PM sent with payment details. Thanks.

Epongette
27th June 2018, 12:25
Epongette: PM sent with payment details. Thanks.

Paiement sent

sordan
27th June 2018, 12:32
Thank you for your payment, will post your card today. Thanks.

Chiemsee
27th June 2018, 14:41
Interested! pm sent!

sordan
27th June 2018, 15:41
Sorry but this batch of 10 cards are sold now. I will let you know on this thread once I will get another batch of them. It should be within few weeks.
Thanks.

Methanoid
2nd July 2018, 09:09
I'm interested in one but puzzled. There is ONE jumper on board labelled OKtapussy/Oktagon Rom. So that is actually a jumper for "onboard Rom or 3.1 Kickstart" instead? Need to know since the card blocks the Kickstart socket from fitting a switcher

sordan
4th July 2018, 14:53
We have another small batch of 10 cards available to buy now, ready to despatch on Friday (6th July). Unfortunate we do not have more IDE - CF adapters so there is no free gift this time. Thanks.

- - - Updated - - -

Methanoid: Hi there. There is no Amiga rom on this card. If you want to boot Workbech 3.0 or above you need to change your kickstart on your Amiga 500 motherboard or you can use Kickstart switcher and choose between 1.3/3.1. Thanks.

Methanoid
4th July 2018, 15:34
We have another small batch of 10 cards available to buy now, ready to despatch on Friday (6th July). Unfortunate we do not have more IDE - CF adapters so there is no free gift this time. Thanks.

- - - Updated - - -

Methanoid: Hi there. There is no Amiga rom on this card. If you want to boot Workbech 3.0 or above you need to change your kickstart on your Amiga 500 motherboard or you can use Kickstart switcher and choose between 1.3/3.1. Thanks.No gift :-( but your webnpage is awfully unclear on the ROMs. It implies it includes 3.1. It is hopeless in what it says re OKTA. :-(

Sent from my Redmi Note 4 using Tapatalk

Methanoid
4th July 2018, 15:36
And BBOAH is also confused.

http://www.bigbookofamigahardware.com/bboah/product.aspx?id=2058


We have another small batch of 10 cards available to buy now, ready to despatch on Friday (6th July). Unfortunate we do not have more IDE - CF adapters so there is no free gift this time. Thanks.

- - - Updated - - -

Methanoid: Hi there. There is no Amiga rom on this card. If you want to boot Workbech 3.0 or above you need to change your kickstart on your Amiga 500 motherboard or you can use Kickstart switcher and choose between 1.3/3.1. Thanks.No gift :-( but your webnpage is awfully unclear on the ROMs. It implies it includes 3.1. It is hopeless in what it says re OKTA. :-(

Sent from my Redmi Note 4 using Tapatalk

Sent from my Redmi Note 4 using Tapatalk

sordan
4th July 2018, 15:41
Our website does not say at all there is rom 3.1 installed on this turbo card. Item description from our website says only that you can boot from 1.3 or 3.1 Kickstart using HC533. This is illegal to put Amiga rom on board of HC533. I did my best when I was creating description for this card and I am very sorry that this is "awfully unclear" for you. Other 39 people who bought already HC533 didnt have any problems to understand our item description.

There is a free gift for first 5 buyers as we have only 5x CF - IDE adapters worked with this card left.

Information at bigbookofamigahardware.com is false so Robert Miranda have to correct it.

Added: I have already asked Robert Miranda owner of the bigbookofamigahardware.com to remove this false information about 3.1 rom.

gdunlapsd
4th July 2018, 17:10
Declaring interest - very much so!

sordan
4th July 2018, 17:18
PM sent with details. Thanks.

sordan
4th July 2018, 18:24
All gone now. Thanks for your orders. I will post all of them on Friday 6th July.

x56h34
5th July 2018, 03:15
Interested, when the next batch is available.


Sent from my iPhone using Tapatalk

sordan
5th July 2018, 21:23
There is one more for sale right now.

OXCOM
5th July 2018, 21:28
Declare interest.

PM sent.

------------

Withdrawn interest. PM sent.

sordan
5th July 2018, 22:44
OXCOM withdrawn his interest because he has no Paypal or ATM Card so there is still one for sale in this batch. Thanks.

- - - Updated - - -

Ok all 12 cards gone now. I will post on this thread when I got another small batch of them for sale. Thanks.

Spacefrog
2nd December 2018, 10:32
Hope new cards H533 are coming soon?
I am interested.

Clonecds
20th March 2019, 07:08
Declaring interest !