PDA

View Full Version : A1000 hardware pr0n



salaxi54
4th December 2010, 11:05
Well, i did a little "inspection" and PMS on two of my A1000s, and thought i'd take some pics on the way. I believe some of you A1k vets will find it handy in a way.. :)

Here's the tags on the psu's
First the NTSC 110V model:

http://i298.photobucket.com/albums/mm242/salax54/NTSCPSU.jpg

Next up the PAL 240V one:

http://i298.photobucket.com/albums/mm242/salax54/PALPSU.jpg

The NTSC board power LED cable

http://i298.photobucket.com/albums/mm242/salax54/NTSCPOWERLED.jpg

The PAL board power LED cable

http://i298.photobucket.com/albums/mm242/salax54/PALPOWERLED.jpg

Next four pics are of the floppy spacers that mount the drive. Common to both NTSC and PAL..

http://i298.photobucket.com/albums/mm242/salax54/FLOPPYSPACERS1.jpg

http://i298.photobucket.com/albums/mm242/salax54/FLOPPYSPACERS2.jpg

http://i298.photobucket.com/albums/mm242/salax54/FLOPPYSPACERS3.jpg

http://i298.photobucket.com/albums/mm242/salax54/FLOPPYSPACERS4.jpg

Here's the NTSC floppy LED cable:

http://i298.photobucket.com/albums/mm242/salax54/FLOPPYLED1.jpg

And the PAL equivalent:

http://i298.photobucket.com/albums/mm242/salax54/FLOPPYLED2.jpg

Finally, floppy with belly up, shows the LED cable coming out of the drive, and you can see the height is not what you'd call full-height, but actually "double-height" :D

http://i298.photobucket.com/albums/mm242/salax54/FLOPPYLED.jpg

Hope this was usefull, as i've seen people asking about cables and floppies in the past..

mfilos
4th December 2010, 11:14
Very nice pr0n pics you shoot there Bill!!!
I'm sure they'll get handy for people seeking :)

Elerion
4th December 2010, 11:36
I don't have A1000, but had the pleasure of fixing a few in the past. I was always amazed how beautiful this machine is. :inlove:
Thanks for reminding with this lovely pics.

rkauer
4th December 2010, 12:03
Moar!

Moar pr0n!:) :) :) :) :)