I'm looking for a bracket and/or cover that allows me to safely mount the Indivision AGA VGA connector under the disk drive in an original A1200 desktop case. Maybe there's a product that can be used for this, or maybe someone can create a custom bracket for me.
Closed Indivision AGA bracket for original A1200 desktop case
- Thread starter thijs
- Start date
- Replies 1
- Views 1352
- Status
Re: Indivision AGA bracket for original A1200 desktop case
@thijs
Hello my friend, Congrats on your Indivision AGA wondeful piece of kit, it certainly transformed my A1200.
Now as far as I am aware no commercial bracket exists for this purpose, however it is very easy to modify the backplane of an old PC VGA card to do the job yourself. A little bit of bending, filing & then a touch of glue to prop it in place, I enclose a picture of my modified bracket, and to be honest I didn't need to even glue it, one end is captured between the Mobo shield & the rear plastic cover next to the Mouse port & the other end wedges very nicely into the corner of the A1200's bottom cover.
Took me 30Mins & has been rock steady since, I bit of patience & I'm sure you can do it.
TC :mrgreen:
@thijs
Hello my friend, Congrats on your Indivision AGA wondeful piece of kit, it certainly transformed my A1200.
Now as far as I am aware no commercial bracket exists for this purpose, however it is very easy to modify the backplane of an old PC VGA card to do the job yourself. A little bit of bending, filing & then a touch of glue to prop it in place, I enclose a picture of my modified bracket, and to be honest I didn't need to even glue it, one end is captured between the Mobo shield & the rear plastic cover next to the Mouse port & the other end wedges very nicely into the corner of the A1200's bottom cover.
Took me 30Mins & has been rock steady since, I bit of patience & I'm sure you can do it.
TC :mrgreen:
- Status