PDA

View Full Version : Closed A603 Indivision Adapter boards (Allows you to keep floppy in A600)



kipper2k
11th August 2011, 20:26
Hi All,

I have some of these boards for sale, 5 to start ready for mailing on Tuesday of next week.

Rather than retype all the info again i would like to give a link to the actual adapter info and installation page i already have done

http://eab.abime.net/showthread.php?t=59340

The adapter is simply a bridge that allows the Indivision to be relocated in the A600 so that the floppy drive does not have to be removed if you install the Indivision video card using the A603 memory adapter. This will allow the case to be closed properly without the need to remove the floppy drive :)

Cost of the Adapter board is $10.00 (parts cost a little more than last time) and shipping is $8.50 to most parts of the world. (Australia and Greece is $9.50.

As i said, i will have 5 ready on Monday, mailing them on Tuesday. I am making more but i have a vacation planned soon so may be a few weeks before i get a chance to make more (at least 30 more).

Nicke
11th August 2011, 20:42
I want one unit please :)

kipper2k
11th August 2011, 20:51
Hi Nicke,

Noted, I will use only this thread for order requests

fatbob_gb
11th August 2011, 21:14
I am interested in one as well.

PM sent.

protek
11th August 2011, 21:17
Still interested. Sending PM via EAB.

moijk
11th August 2011, 22:10
count me in for one.

Nicke
11th August 2011, 23:06
Is this a preorder thread or do you actualy have 5 unit available for us at amibay right now?

tbtorro
11th August 2011, 23:23
Interested PM en route

Skilgannon
11th August 2011, 23:41
Just to help others it looks like all five adapters have interested buyers in the following order:

Nicke
Fatbob_GB
Protek
Moijk
TBTorro

@kipper 2k please confirm the selling status once you get a chance.

Cheers

John

kipper2k
12th August 2011, 00:15
Hi All,

I can build 10, i didnt think i would actually have this many sold so fast. 2 are reserved from a previous thread, so to date i can have 10 ready for Tuesday and then i'll have to do more when i get spare time

So, bottom line, 2 more can be sold below this post and that will be it.

@Nicke, it is a pre order, but they will be ready to mail next Tuesday (16th Aug).

edit. I won't ask for money until ready to mail

CrashMidnick
12th August 2011, 07:21
Interested by one ! sending PM !

kipper2k
16th August 2011, 03:47
to all who have expressed interest, the boards are ready for shipping, cost is $18.50 Canadian Paypal gift (add $1.50 if you send funds as payment for goods)

My paypal is kipper2k@mts.net

please include your mailing address in a note or PM.

PM also sent to all buyers

I still have 5 left built ready for shipping

Nicke
16th August 2011, 10:45
Money sent! :)

CrashMidnick
16th August 2011, 10:49
Payment sent :thumbsup:

fatbob_gb
16th August 2011, 11:08
Payment Sent :thumbsup:

protek
16th August 2011, 16:54
Payment sent. :)

Nicke
25th August 2011, 14:31
I recived the unit. I have a problem thou. The keyboard puts the indy out of itīs socket when I close the case :(

The solution would be to unsolder the first socket, and solder your adapter on the board but I wont do that

*EDIT*
It works, The Indy seems extremly sensitive,and easly pops out from itīs position. Anyway, thanks for the unit :)

fatbob_gb
25th August 2011, 20:26
Arrived safely - Thanks :thumbsup:

hese
26th August 2011, 08:54
I'm interested in two units. PMed.

kipper2k
26th August 2011, 15:51
I'm interested in two units. PMed.

Hi, PM sent.

tbtorro
29th August 2011, 00:06
Received mine - pro product.. Thanks! Feedback left.

protek
29th August 2011, 08:34
Received today! Thanks! Leaving feedback.

CrashMidnick
29th August 2011, 09:12
Received mine aswell, feedback left !

jvdw007
3rd October 2011, 00:51
Kipper2k, do you still have any of these A603 adapter boards available? I'd be interested in one if you have any left :thumbsup: