PDA

View Full Version : Closed WANTED: Info and/or GVP HD8+ RAM



gazcbm
21st February 2008, 00:15
Hi All,

I am looking for a few simms to put in my GVP-hD8+ sidecar, if you have any spare let me know how much you want for them. Alternatively if somebody could shed some light on the exact spec that I should be looking for that would be equally just as good!

Thanks in advance
:-)

Zetr0
21st February 2008, 09:14
hello there

The HD8+ takes 30pin simms, I belive i have 8x 1mb sticks of them, i will double check later, should that i do, you cn have them for £5 which will include postage :)

heres some info on the card

Impact A500 HD8+ Series II
Company : Great Valley Products, USA
Date 1990
Amiga A500: Interface: side expansion port
Autoconfig ID: 2017 / 10,11

Features:
[list:13chkyik]
* SCSI 2 DMA controller 3.58 MB/s transfer speed
* FaaasT ROM SCSI driver (gvpscsi.device) - autobooting requires at least Kickstart 1.3
* RDB compatible
* place for a 3.5" hard disk inside the case
* 50 pin internal header
* DB25 external connector
* supported by Linux
* A-Max II driver (gvpscsi.amhd)

* memory four 30 pin SIMM sockets accept 8 MB RAM
* accepts 1 or 4 MB 120 ns SIMMs
* supports 2, 4 or 8 MB configurations
* fully autoconfiguring

* notes connects to the side expansion port
* has no passthrough connector
* stylish design matches the A500
* disable switch
* hard disk activity LED
* external power supply
* built in fan
* mini expansion slot for the optional PC emulator card
* problems may arise with the combination of A500, 8372A Agnus and an internal memory expansion with CPU or Gary adaptor - a trace has to be cut to solve the problem

for jumper settings see this linkie (http://amiga.resource.cx/exp/search.pl?product=&company=gvp&amiga=&intf=&cat=scsi&mid=&base=dec&pid=#impact500mk2)

[/list:u:13chkyik]

Hope this helps. PM me your details and i can hopefully get these memory sticks posted to you on Friday :)

gazcbm
21st February 2008, 19:56
PM on its way! :-) Thanks