PDA

View Full Version : Sold A1200 E/Box 1260 64MB Mediator Full setup



RetroAmi.com.pl
19th August 2011, 12:41
Hi, I've bought Sam440 and now I decided to sell my A1200 Tower project. Since there were no one who was declaring interest in buing full set, now I've splited my dear friend. Amiga and other parts are in good condition. Was working very stable to the very end. Apollo 1260 was bought from Stachu100 few months ago. Tower case looks good.

List of the parts to sell:

Amiga 1200 Rom 3.1 rev. 1D4 in E/Box Tower with 200W PSU (AT), PC-KEY and PSU Adapter, IDE 2,5 -> 3,5 Adapter - 135 EUR - sold to esc [delivery in progress]
Apollo 1260/80 with 64MB of RAM (two SIMM sockets) - fits only into tower case - 290 EUR - NOW INCLUDES FREE SHIPPING INSIDE EU
Apollo 1240/40 with 64MB of RAM (two SIMM sockets - MACH 130) -battery removed and replace with coin batter, MACH socket removed (by Stahu100) and the MACH put directly on board, fits only into tower case - 135 EUR
Mediator 1200 PCI with MediatorMultimediaCD - 135 EUR - sold to jayrox (http://www.amibay.com/member.php?u=2682) [delivery in progress]
Interface which lets to connect two internal floppy drives in towered A1200 - 18 EUR
HD Floppy drive 1.76MB/880kB (1.44MB/720kB PC disks as well) without front panel fits into desktop - 35 EUR - sold outside Amibay
Eide'99 with AllegroCDFS - 20 EUR - sold outside Amibay
Mroocheck interface with COM->PS2 adapter and Genius PS2 mouse with scroll - 20 EUR

Prices does not include shipping costs. Payment by PayPal (with option "gift" or buyer pays all fees) or bank transfer.

If You have any questions please PM me.

Thanks for looking ;)
Daniel

stachu100
19th August 2011, 12:59
Hi Daniel,

Indeed, nice system. :-)

Good luck with sale!

RetroAmi.com.pl
21st August 2011, 13:36
Shipping costs are between 50 - 75 EUR depending on destanation.

If there will be no one who will buy all set then I will consider split option. If someone is interested in particular part please PM me. If I see that I will sell most of the parts from the list, then my decision will be quicker.

I hope this statement is not agains the rules.

johnim
21st August 2011, 13:51
sorry mate this is against the rules
If someone is interested in particular part please PM meif you do decide to split then peeps will have to decare interest in thread before sending pm and each item must have a price
thanks

Tajmaster
21st August 2011, 13:51
Shipping costs are between 50 - 75 EUR depending on destanation.

If there will be no one who will buy all set then I will consider split option. If someone is interested in particular part please PM me. If I see that I will sell most of the parts from the list, then my decision will be quicker.

I hope this statement is not agains the rules.

Hi ITU

If you are going to split your bundle then you need to put a price against each item you are selling :thumbsup:

Taj

RetroAmi.com.pl
22nd August 2011, 22:34
I also may consider to trade that Amiga (without Spider2, Voodoo, SB128, Ethernet card, Mroocheck and Sotware - besides needed drivers for Mediator and EIDE'99) for an Amiga 4000D faster than stock 040/25.

Shipping costs are covered by each side. I'll pay for shippment of my Amiga and the other side will pay for its Amiga. Shippment only with insurace.

If there will be much differece in configs then the side with weaker config should pay suitable equivalent.

So if You want to trade just PM me :)

Thanks
Dan

Traccer
22nd August 2011, 22:46
lol thats my ideal system right there.. im selling off a bunch of stuff to build a system like that or build out a 4000.. If the stuff sells before you sell this i'll buy it in a heart beat and forget about fixing up the other 4000 and just sell it too.

RetroAmi.com.pl
22nd August 2011, 23:03
Nice to hear that :) I put a lot of my heart, time and money to fix all this together and make it works.

Traccer
22nd August 2011, 23:05
Yea I have 2 4000's and a 2000 that i'll be parting out and selling, I thought about building out one of the 4000's but seems that the 1200 would me more suited for my needs.

RetroAmi.com.pl
29th August 2011, 16:09
Now splited into separate parts. Enjoy buing :)

Parts are also annouced outside Amibay.

esc
29th August 2011, 18:56
Declaring interest in:

Amiga 1200 Rom 3.1 rev. 1D4 in E/Box Tower with 200W PSU (AT), PC-KEY and PSU Adapter, IDE 2,5 -> 3,5 Adapter - 135 EUR

What is total with shipping to USA please? PM inbound :)

Fieldday
29th August 2011, 19:01
Hello,
I am also interessted in the A1200 tower case if esc donīt want it.

Best regards

FD

RetroAmi.com.pl
29th August 2011, 19:39
Declaring interest in:

Amiga 1200 Rom 3.1 rev. 1D4 in E/Box Tower with 200W PSU (AT), PC-KEY and PSU Adapter, IDE 2,5 -> 3,5 Adapter - 135 EUR

What is total with shipping to USA please? PM inbound :)

PM answered.

ddni
29th August 2011, 19:45
NIce lot of kit there! Good luck with the sale.

RetroAmi.com.pl
30th August 2011, 19:44
Little price drop on Apollo 1240.

rkauer
30th August 2011, 22:56
How bad is the postage for the Mroocheck + PS/2 adapter to Brazil? I don't need the mouse.

RetroAmi.com.pl
30th August 2011, 23:48
How bad is the postage for the Mroocheck + PS/2 adapter to Brazil? I don't need the mouse.

By polish post, slow way is about 15 EUR (delivery in 2 weeks or more), faster is about 20 EUR (about 6-8 days). Both ways are with insurace for 40 EUR.

rkauer
31st August 2011, 04:15
I'll pass, sorry. :(

jayrox
31st August 2011, 16:09
Interested in the Mediator 1200 PCI with MediatorMultimediaCD - 135 EUR, what would the total price be posted to the United Kingdom, thanks :)

Also does it come with the pass through connector so that I can use it with my apollo 1240, thanks.

RetroAmi.com.pl
31st August 2011, 19:17
Interested in the Mediator 1200 PCI with MediatorMultimediaCD - 135 EUR, what would the total price be posted to the United Kingdom, thanks :)

Also does it come with the pass through connector so that I can use it with my apollo 1240, thanks.

I can check the total price tomorrow but as far I could find out it would be 19 EUR for economic shipping (land/sea) or 25 EUR faster option (airplane) via Polish Post with insurace. The prices are for delivery to Ireland so to UK should be similar. And yes Mediator comes with pass through connector (I had Apollo 1260 in my Amiga).

parski
31st August 2011, 19:51
interested in mediator 1200, second in line I guess

jayrox
31st August 2011, 20:05
Any chance you could take a picture of the connectors from the power supply that go to the mediator, I have the same tower as you but don't think I have the correct connectors, thanks :thumbsup:

johnim
31st August 2011, 20:16
hi mate this mediator has standard AT psu connectors on

so your case uses the same connectors the mediator powers the motherboard

http://www.amiga-hardware.com/showhardware.cgi?HARDID=1325
http://www.amiga-hardware.com/download_photos/powertower_4_big.jpg

look here mate
http://powersupply88.com/at-power-supply.html

jayrox
31st August 2011, 20:32
Thanks for the reply john but im still not sure if my power supply has the right connectors, I will take some pics on my phone and post them if I can fint the cable to connect the phone to my pc :)


hi mate this mediator has standard AT psu connectors on

so your case uses the same connectors the mediator powers the motherboard

http://www.amiga-hardware.com/showhardware.cgi?HARDID=1325
http://www.amiga-hardware.com/download_photos/powertower_4_big.jpg

RetroAmi.com.pl
31st August 2011, 20:48
Any chance you could take a picture of the connectors from the power supply that go to the mediator, I have the same tower as you but don't think I have the correct connectors, thanks :thumbsup:

Hi mate, there are pics of psu connector on the mediator. It is standard AT. There is also pass through connector shown as well. Hope this will help.

http://http://edenkomputery.pl/img/mediator/100_6900.JPG

http://http://edenkomputery.pl/img/mediator/100_6901.JPG

http://http://edenkomputery.pl/img/mediator/100_6900.JPG

jayrox
31st August 2011, 20:50
Mine is missing the P8 connector?

The big block in the first pic from the psu plugs into the block in the second pic and that block has what looks like the p8 & p9 connectors but all the wires that come out of the p8 & p9 connectors are connected to the power cord that powers the amiga (if that makes sence).

esc
31st August 2011, 20:52
@jayrox:

Ask ELBOX if the power connector is even needed. Mine is broken on my a4000D mediator, and it works just fine, ELBOX said it isn't necessary.

johnim
31st August 2011, 20:57
@jayrox
you only need the AT to ATX psu adapter its the same i use with the black and green wires for power switch

jayrox
31st August 2011, 20:59
Is this what I need, http://amigakit.leamancomputing.com/catalog/product_info.php?cPath=39&products_id=363

johnim
31st August 2011, 21:01
you already have it mate the top half of the second pic

jayrox
31st August 2011, 21:03
Ahhh I see so all I do is remove the power connector that is connected to the second pic then I have the p8 & p9 connectors :)

johnim
31st August 2011, 21:04
yes mate

jayrox
31st August 2011, 21:06
Great, was just confused as to what powered the motherboard, but it all makes sence now, thanks for the help, just waiting on the total cost now :)

RetroAmi.com.pl
31st August 2011, 23:01
Amiga 1200 sold to esc, I'll post it tommorow. I put some pics of the Apollo 1240/40. All changes on card made by Stachu100.

RetroAmi.com.pl
1st September 2011, 09:44
Interested in the Mediator 1200 PCI with MediatorMultimediaCD - 135 EUR, what would the total price be posted to the United Kingdom, thanks :).

Ok I have information about shipping costs.

1. 15 EUR - delivery in 2 - 3 weeks (land/sea), w/o insurace [Polish Post] - TOTAL = 150 EUR;
2. 21 EUR - delivery in about 7 days, w/o insurace [Polish Post] - TOTAL = 156 EUR;
3. 27 EUR - delivery in about 3 - 5 days, w insurace [DPD DE - tracking] - TOTAL = 162 EUR;

Hope this will help :)

jayrox
1st September 2011, 10:40
Go on then I will take option 3, 27 EUR - delivery in about 3 - 5 days, w insurace [DPD DE - tracking] - TOTAL = 162 EUR, send me the payment details thanks :)

RetroAmi.com.pl
1st September 2011, 11:12
@jayrox (http://www.amibay.com/member.php?u=2682)

Nice to hear that :thumbsup: PM with details sent.

jayrox
1st September 2011, 11:30
Payment sent with postage address, thanks :)

RetroAmi.com.pl
1st September 2011, 11:46
Payment recived, I'll send Mediator tommorow.

RetroAmi.com.pl
1st September 2011, 18:33
Amiga is on her way to esc. Posted today. I hope she will arrive safely and in good condition.

RetroAmi.com.pl
2nd September 2011, 09:05
Price drop on Apollo 1260, HD Floppy drive, EIDE'99 and 2xFDD interface.

stkal
2nd September 2011, 09:33
Interested in EIDE 99... Shipping cost to Greece please?

RetroAmi.com.pl
2nd September 2011, 14:24
Interested in EIDE 99... Shipping cost to Greece please?

By mail in envelope it is 10 EUR with insurance.
In box package it will be 18 EUR with insurace.

RetroAmi.com.pl
3rd September 2011, 21:38
Track&trace number for Mediator sent via PM.

RetroAmi.com.pl
5th September 2011, 16:05
Now free shipping inside UE for Apollo 1260. Price for Apollo is 290 EUR.

RetroAmi.com.pl
6th September 2011, 11:20
Please close the thread. I'll try to sell or trade those parts that left in other time.

rkauer
6th September 2011, 19:47
Will mark thread as "sold", but closing only after all sold pieces arrives destination.

From the first post there are a few in transit, yet.

RetroAmi.com.pl
6th September 2011, 20:20
Ok :)

jayrox
7th September 2011, 12:22
Recieved the Mediator 1200 PCI with MediatorMultimediaCD all seems good leaving feedback, thanks :)