PDA

View Full Version : Closed A4000, A2000 and soo much more



Traccer
22nd August 2011, 16:09
OK this is mainly just a place marker while I get pictures together and better details. A buddy of mine unloaded a ton of stuff one me and i'll be posting up the extra stuff as I can. Pictures and better descriptions should be posted tonight.

SHIPPING IS EXTRA and will ship at cost but willing to shipworld wide. I own a UPS store so my international shipping rates are very low. So i'm willing to price out both UPS or postal


A 4000 040 $450 Caps look to be good never replaced. Battery shows slight signs of leakage but doesn't look to have hit the board yet..

http://www.sysmatrix.net/~cdsmith/4000a.jpg
http://www.sysmatrix.net/~cdsmith/4000c.jpg


Fusion Forty $225 Card looks good and boots up in the 2000

http://www.sysmatrix.net/~cdsmith/fusion1.jpg

http://www.sysmatrix.net/~cdsmith/fusion2.jpg
http://www.sysmatrix.net/~cdsmith/fusion3.jpg

Emplant $40 Run mac os on your Amiga no software or drivers included but they are out there ***SOLD***


PicassoII $85 Tested in a2k and works fine. no driver disks ***SOLD***


Opalvision $65 Tested and works great was sent in for an RMA and never used other then testing comes with drivers box books.. etc this looks brand new
http://www.sysmatrix.net/~cdsmith/opal1.jpg
http://www.sysmatrix.net/~cdsmith/opal2.jpg

http://www.sysmatrix.net/~cdsmith/opal3.jpg


A 2000 $150 Boots up just fine.. has an scsi card in it with HD and CDRom.. no os installed

http://www.sysmatrix.net/~cdsmith/2000a.jpg

http://www.sysmatrix.net/~cdsmith/2000b.jpg
http://www.sysmatrix.net/~cdsmith/2000c.jpg



Video Toaster 2000 $75 No software for this but everyone should be able to get it without any problems.. If I'm not mistaken these cards all have lifetime on them... need to double check that


Video Toaster 4000 $125 No software for this but everyone should be able to get it without any problems.. If I'm not mistaken these cards all have lifetime on them... need to double check that


OK everything has been tested to the best that I can test.. And everything seems to work great.. I'll take some close up pictures of everything this evening. Because of age everything is being sold as is.

Nicke
22nd August 2011, 16:12
Declaring intrest in the picasso 2 , shipping to sweden?

joekster
22nd August 2011, 16:35
2nd in line for picasso 2.

storhemulen
22nd August 2011, 16:56
Interested in Emplant pending p&p to Sweden...

Traccer
22nd August 2011, 17:09
Declaring intrest in the picasso 2 , shipping to sweden?


UPS $52.32 takes about a week or less

USPS $24.95 takes alot longer lol

---------- Post added at 16:09 ---------- Previous post was at 16:07 ----------


Interested in Emplant pending p&p to Sweden...

Since the emplant card is about the same as the PII im just going to use the same qoutes.. once a deal is struck im willing to enter everything into the computer full address to give a full solid price.


UPS $52.32 takes about a week or less

USPS $24.95 takes alot longer lol

Remeber all these prices are just quotes untill i get full address entered into the comptuer.. so they can go up or down a few bucks

LTAC
22nd August 2011, 17:14
Not interested for the moment but PM sent to have more informations & shipping cost about the FUSION FORTY.

Traccer
22nd August 2011, 18:04
Oh also open for trades.. Im keeping an a4000 it already has a cv64 in it..

Zetr0
22nd August 2011, 18:11
Oh also open for trades.. Im keeping an a4000 it already has a cv64 in it..

Interesting =)

I would be interested in the Fusion 40, pending its speed (MHz) and the amount of onboard RAM it has.

What would you be interested in trade?

Traccer
22nd August 2011, 18:38
Oh also open for trades.. Im keeping an a4000 it already has a cv64 in it..

Interesting =)

I would be interested in the Fusion 40, pending its speed (MHz) and the amount of onboard RAM it has.

What would you be interested in trade?


Well Im trying to sell all the extra stuff off to make one amazing a4k .. Video card seems to be covered...

lets see what else do you think ..
pci
060
ppc
network
any other ideas?

Zetr0
22nd August 2011, 19:58
hmmm what speed is the fusion 40?

They can be from 25MHz, 28MHz and 35MHz

The latter model (35Mhz) can handle upto 128MB of RAM in 16MB 30pin SIMM's

if you have the latter I am sure we can do a deal =)

Traccer
22nd August 2011, 20:08
hmmm what speed is the fusion 40?

They can be from 25MHz, 28MHz and 35MHz

The latter model (35Mhz) can handle upto 128MB of RAM in 16MB 30pin SIMM's

if you have the latter I am sure we can do a deal =)


I'll get that info for ya when I get home from work.. Im pretty sure its 25mhz but I'll have to check check to make sure.. I could be wrong..

hese
23rd August 2011, 08:32
Interested in the Emplant. Sending PM.

Traccer
23rd August 2011, 13:54
[QUOTE=Zetr0;202903]hmmm what speed is the fusion 40?

They can be from 25MHz, 28MHz and 35MHz

The latter model (35Mhz) can handle upto 128MB of RAM in 16MB 30pin SIMM's

if you have the latter I am sure we can do a deal =)


Sorry got home way to late to deal with taking pics or find out more specs.. but did grab the forty and the picasso ii with me to work this morning so ic an pull info off it.. and post crap pictures till i can take high res later


ok its 25mhz .. chips are 3.4.. u35... what else do you want to know off the card?

storhemulen
23rd August 2011, 21:43
Payment for Emplant card sent!

maw2k
24th August 2011, 04:34
Not interested at the moment but pm sent to have more information about the amiga 4000.

Traccer
24th August 2011, 14:08
Payment for Emplant card sent!


Card sent.. let me know when you get it and that it got there ok...

Nicke
24th August 2011, 23:10
Payment for the Picasso II card sent :thumbsup:

Traccer
25th August 2011, 01:19
Ok some pics added not the best in the world.. if need be i can take some better didnt have good light.. there is still a few things i need to take pics off but didnt have at hand ..

mdripley
25th August 2011, 04:30
what is the A2000 motherboard Rev. and Rom?

jarob
25th August 2011, 13:05
Declaring interest in the A4000 2nd in line, shipping to poland?

Traccer
25th August 2011, 15:09
what is the A2000 motherboard Rev. and Rom?


rev 6.2

3.1 roms

by the way the pictures show the 2000 with toaster in it.. but that will be comming out.. well unless you wish to buy it and then i'l give it to you for $10 off

---------- Post added at 14:09 ---------- Previous post was at 12:15 ----------


Payment for the Picasso II card sent :thumbsup:


Card went out with the morning post.... Good luck with the card and let me know how it works out for ya.

Traccer
25th August 2011, 18:49
Declaring interest in the A4000 2nd in line, shipping to poland?


Shipping to poland is pretty high about $150

---------- Post added at 17:49 ---------- Previous post was at 17:48 ----------

Pics have been added.. also guys if there is anything i need to check on these let me know.. they were giving to me and i've turned them on to make sure they work.. checked caps to make sure they look good check battery areas to make sure no heavy acid leakage.. everything seems to look good there.. anything else i need to check that might help the sell of these items?

maw2k
25th August 2011, 18:54
which board rev. have the A4000?

jman
25th August 2011, 22:23
Hello,

asking for some details about the A2000:
- brand of SCSI controller?
- how much would be shipping it to Italy? I suppose won't be much different from Poland :-(

Thanks

Traccer
25th August 2011, 22:38
Hello,

asking for some details about the A2000:
- brand of SCSI controller?
- how much would be shipping it to Italy? I suppose won't be much different from Poland :-(

Thanks

your right shipping isnt much better $135 granted this can go up and down depending on a few factors.. i cant say for sure till i package it up fully and put the full address so it could go up a few bucks or down..

as for the scsi card i'll have to look when i get home.. ok.. after looking around the net at card .. i think its adscsi 2000 but i'll double check

jman
25th August 2011, 22:41
as for the scsi card i'll have to look when i get home.. it starts with an a if i remember right lol

lol, then it should be the A2090 or A2091. But thanks for checking either way.

Traccer
25th August 2011, 22:54
as for the scsi card i'll have to look when i get home.. it starts with an a if i remember right lol

lol, then it should be the A2090 or A2091. But thanks for checking either way.


adscsi 2000 i think.. after looking at pictures online..but again i'll check when i get home

Zetr0
26th August 2011, 03:01
@Traccer

Thanks for getting back to me about the Fusion 40 model, alas I was looking for a way to get 128MB of RAM in my A2000 =)

Unfortunately the 25Mhz model doens't recognize 16MB 30pin SIMM's

I wish you all the best with your sales =)

jarob
26th August 2011, 06:33
Declaring interest in the A4000 2nd in line, shipping to poland?


Shipping to poland is pretty high about $150


Shipping cost is very high in fact. If there is not lower cost option, I have to cancel this purchase.

Traccer
26th August 2011, 14:20
Declaring interest in the A4000 2nd in line, shipping to poland?


Shipping to poland is pretty high about $150


Shipping cost is very high in fact. If there is not lower cost option, I have to cancel this purchase.


Yea no way to make the shipping any cheaper.. maybe drop the price alittle and throw in a a4000 keyboard to help offset the high cost of shipping.

maw2k
26th August 2011, 17:22
Traccer, don't forget me :)


which board rev. have the A4000?

Traccer
26th August 2011, 20:28
Traccer, don't forget me :)


which board rev. have the A4000?


I wont.. I'll get the rev of the board when i get home today...

Traccer
27th August 2011, 03:57
REV B



Traccer, don't forget me :)


which board rev. have the A4000?

Traccer
28th August 2011, 05:04
anyone else want to know anything else?

Traccer
29th August 2011, 14:33
Any more interest?

Traccer
30th August 2011, 04:28
Just throwing the idea out there.. I'd be willing to trade the 4000 for the right 1200.. so throw out your trades..

nikos.rizos
30th August 2011, 07:50
What's your idea of a "right" 1200?

Traccer
30th August 2011, 13:54
What's your idea of a "right" 1200?


Something expanded a bit.. maybe already towered.. with pci or something.. doesnt have to be decked out with 060 or anything but more then just a stock 1200. Something somewhat close to what im asking for value wise.

Traccer
31st August 2011, 14:36
To help out for the high shipping I'm willing to split shipping on any of the bigger items to help out and make it worth while to ship over seas

Traccer
1st September 2011, 14:26
Ok... if anyone doesnt speak up on this in the next few days.. its gonna go to ebay..

Traccer
2nd September 2011, 15:35
Ok most of this stuff will either be going to ebay or back into the closet for another 10 years after the holiday weekend... Thanks for all that looked

Traccer
13th September 2011, 22:40
Anyone?

Zetr0
14th September 2011, 00:07
@Traccer

I have to admit your fusion forty temps me as I would love to know if it could handle 128MB of RAM, alas I dont have the pocket money at the moment to find that out.

However, I do wish you the best with your sales, I will say that being patient helps, and bumping the thread when either there is a change in the items, their price or another item is sold. Also you can bump the thread every three weeks. This gives other members whom want to sell a fair amount of time to get noticed as well =)

all the best with your trades

Merlin
8th October 2011, 19:23
@ Traccer

Please contact me by PM as soon as possible.

I am temporarily locking this thread pending an investigation.