I have two 32MB sticks, they are 3.3V 'GoldenRAM' 72-pin EDO 60ns RAMs, with 16 chips each, GM71C17403CJ6. These:
Now, I'm trying to make a PSU with 6A on the 3.3V like both the 68060 @ 100MHz and two 32MB sticks.
Unfortunately, this means that the RAM sticks must consume less than half the power of these ones, or max 1.7A (5.6W) for both.
-~-
That was for the super pros, long story short I'd like to buy 2 tested working 50-70ns 32MB memory sticks from you if they
1) Are made later than 1999
2) or have fewer than 16 chips on each stick
3) or are known to have a smaller manufacturing process than mine ('microns')
If you don't know these specs you can post the chip numbers and I can google some info.
Now, I'm trying to make a PSU with 6A on the 3.3V like both the 68060 @ 100MHz and two 32MB sticks.
Unfortunately, this means that the RAM sticks must consume less than half the power of these ones, or max 1.7A (5.6W) for both.
-~-
That was for the super pros, long story short I'd like to buy 2 tested working 50-70ns 32MB memory sticks from you if they
1) Are made later than 1999
2) or have fewer than 16 chips on each stick
3) or are known to have a smaller manufacturing process than mine ('microns')
If you don't know these specs you can post the chip numbers and I can google some info.