PDA

View Full Version : Buddha Flash Phoenix Edition Query



zimgr5
24th April 2009, 17:10
Got this controller & long ribbon today, but have questions and don't want to start new thread :

- in my A3000T, should it be inserted into Zorro soctet "as-is" or upside-down ?
- where is pin0 located ? (don't know how to connect ribbon)
- which IDE connector from these two is primary and which secondary ?
- does it works with DVD drives or only CD ?


Sorry for those questions but searched everywhere & can't find any manual for this :shrug:
Thanks.

TheCorfiot
24th April 2009, 17:23
@zimgr5

New thread created & post moved here for you :wink:

TC :mrgreen:

TheCorfiot
24th April 2009, 17:29
@Zimgr5

Right now for an answer to your problem :D

Have a look at SkyDivinGirls A4000 piccy's in the following link which show the Buddha installed in the Zorro Slot.

This should answer your questions and give you the confidence to install the card :wink: .

viewtopic.php?f=89&t=2214&start=0 (http://www.amibay.com/viewtopic.php?f=89&t=2214&start=0)

TC :mrgreen:

SkydivinGirl
27th April 2009, 00:51
Yep! Look at the pictures to see where PIN 1 is located. The 44-Pin (Small) connector is Primary and the 40-Pin (Large) connector is secondary. I'm running all the drives in my Amiga from the Buddha. See the Buddha Web Site (http://www.jschoenfeld.com/products/buddha_e.htm) for a list of supported drives. You can get the drivers from Here (http://www.google.com/url?sa=U&start=1&q=http://amiga.resource.cx/exp/buddha&ei=vOT0Se6AK53Ftgf29oG4Dw&usg=AFQjCNF_gBidVIh7YYSLcSrBjniN7kJCPg).

Ciao!

Heather