PDA

View Full Version : Closed SCSI controller for Cyberstorm MK II



RetroAmi.com.pl
13th April 2012, 15:59
I'm looking for SCSI controller for Cyberstorm MKII.

omega01
14th April 2012, 14:33
Maybe you can be interrested by this (http://www.befr.ebay.be/itm/Amiga-SCSCI-MODULE-for-Cyberstorm-MK2-NOS-Rare-/280861908078?pt=LH_DefaultDomain_23&hash=item4164ac9c6e) on EvilBay...

Castellen
24th April 2012, 21:54
I have a one of these available, just the main CSmk2 SCSI controller board only, not the external HDB50 board or cables, not that you really need them. The problem is I'm not sure if it works and don't have anything to easily test it on.

So you can have it free for the price of freight from NZ if interested. Worst case if it is faulty, you can probably source another FAS216 controller IC to repair it.

Let me know if that helps.

MZ3540
25th April 2012, 14:20
not the external HDB50 board or cables, not that you really need them.

Actually you do (well almost).
The scsi board itself doesn't have any onboard termination... The terminator is on the board with the external connector. Without it, one end of the scsi chain wont be terminated.

But as you say, the external connector isn't really needed.
Simple solution is to stick a terminator straight onto the unused 50 pin connector on the scsi board.

RetroAmi.com.pl
5th June 2012, 20:09
Admins please close the thread and mark it as found because I found this device already.