This is on my wanted-list:
+ A600 accelerator of any kind (hehe) with 8MB or more fast ram - or an A608.
For my A500-040:
+ FOUND: 4 or (maybe) two 2MB 30-pin SIMM rams for my A500 SCSI expansion, 70ns.
+ FOUND: 4MB ZIL memory for the PP&S 040 board.
+ one of those 1.8MB trapdoor "slowmem" (fake fastmem) expansions for OCS, with the adapter thingy. One manufacturer is called "Hardital"
+ FOUND: 40 MHz crystal for PP&S 040 (68040)
+ FOUND: good 68040 cooler
For my Microbotics/Paravision M1230XA
+ FOUND: 50 or 55MHz crystal (rectangular)
For my A1000:
+ IDE interface to connect a CF card
+ internal 1.5MB ram expansion
You can wet my appetite with other stuff too, I've been looking for a 68060 board with SCSI for my A1200 for example, and an A4000.
Also, see if you want something I have - check my For Sale / Swap thread in the Hardware for sale Amiga forum!
+ A600 accelerator of any kind (hehe) with 8MB or more fast ram - or an A608.
For my A500-040:
+ FOUND: 4 or (maybe) two 2MB 30-pin SIMM rams for my A500 SCSI expansion, 70ns.
+ FOUND: 4MB ZIL memory for the PP&S 040 board.
+ one of those 1.8MB trapdoor "slowmem" (fake fastmem) expansions for OCS, with the adapter thingy. One manufacturer is called "Hardital"
+ FOUND: 40 MHz crystal for PP&S 040 (68040)
+ FOUND: good 68040 cooler
For my Microbotics/Paravision M1230XA
+ FOUND: 50 or 55MHz crystal (rectangular)
For my A1000:
+ IDE interface to connect a CF card
+ internal 1.5MB ram expansion
You can wet my appetite with other stuff too, I've been looking for a 68060 board with SCSI for my A1200 for example, and an A4000.
Also, see if you want something I have - check my For Sale / Swap thread in the Hardware for sale Amiga forum!