PDA

View Full Version : testing the a4000 D stupid question



jvdbossc
9th December 2009, 16:18
I am installing the DENEB USB, the manual states do not put it in the zorro slot the wrong way, but you can, what is the good way? solder down to the motherboard and components to the sky?

sorry poor amiga owner before..

J.T.Kirk
9th December 2009, 16:19
I had a Deneb card before, and I don't remember that you could insert it in the wrong way. Insert it as other normal cards.

jvdbossc
9th December 2009, 16:33
I have no normal cards..

---------- Post added at 16:33 ---------- Previous post was at 16:33 ----------

the card can be down and up.. it is not like pci or isa...

keropi
9th December 2009, 16:37
1 picture = 1.000 words :)

http://i125.photobucket.com/albums/p55/restqp/a3k4.jpg

jvdbossc
9th December 2009, 17:03
was thinking like put it like this in the zorro board then:

http://www.elbox.com/products/extra_prod/mediator_pci_4000di.html

would be wrong.

---------- Post added at 17:03 ---------- Previous post was at 16:52 ----------

put it in linke the picture, installing software! That comes with it

arnljot
9th December 2009, 23:26
1 picture = 1.000 words :)

http://i125.photobucket.com/albums/p55/restqp/a3k4.jpg

I know it's just not me: but this is HOT! :-P

rkauer
9th December 2009, 23:33
1 picture = 1.000 words :)

That's a very nice A3000 you have, Ker!:bowdown:

keropi
10th December 2009, 07:30
1 picture = 1.000 words :)

That's a very nice A3000 you have, Ker!:bowdown:

no amigo, 'tis not mine... I just searched to find a pic of an installed DENEB to help out jvdbossc :D
:p

jvdbossc
10th December 2009, 16:54
yes it is installed, have another question know, but fits in new top.

this can be closed.

rkauer
10th December 2009, 17:49
Non-commercial threads don't need to be closed, mate.:thumbsup:

Kin Hell
12th December 2009, 04:56
1 picture = 1.000 words :)

http://i125.photobucket.com/albums/p55/restqp/a3k4.jpg

I know it's just not me: but this is HOT! :-P

Yeah. It looks good m8, but I hope you ain't rubbing anything, ....while looking. :jester:

Kin

jvdbossc
12th December 2009, 09:01
think i found out the clockport orientation question myself, found some chematics online, stating the first pins have + 5 volts so used a multimeter.. Nothing burns, but not tested the catweasel. Post images today.. The leftover is 4.8 volts :dry: And it confirims to the 20 label..

jvdbossc
12th December 2009, 21:30
It is still not the way I wan't it, but well early stage of config: (yes I noticed that I should glue the catweasel less drunk :):) (i glued it in without looking at it from the back):thumbsdown:

I will paint the case, it looks yellow..No probs with that part I am better in painting than putting parts in

I installed the 68040 card, had the scandoubler in, the usb, the catweasel..

Not finished, I am better in dreaming then in realising :bowdown:

http://img686.imageshack.us/img686/5430/jvb4022.th.jpg (http://img686.imageshack.us/i/jvb4022.jpg/)

http://img696.imageshack.us/img696/3510/jvb4024.th.jpg (http://img696.imageshack.us/i/jvb4024.jpg/)

http://img686.imageshack.us/img686/3992/jvb4025.th.jpg (http://img686.imageshack.us/i/jvb4025.jpg/)

http://img42.imageshack.us/img42/2328/jvb4023.th.jpg (http://img42.imageshack.us/i/jvb4023.jpg/)

http://img138.imageshack.us/img138/3166/jvb4026.th.jpg (http://img138.imageshack.us/i/jvb4026.jpg/)

After formatting the cf in the real amiga, i decided to use winuae, wondering if anybody else thinks it is slow, compared to the real thing

http://img138.imageshack.us/img138/6514/jvb4029.th.jpg (http://img138.imageshack.us/i/jvb4029.jpg/)

rkauer
13th December 2009, 01:48
<SNIP>
I will paint the case, it looks yellow..No probs with that part I am better in painting than putting parts in
<SNIP again>


http://retr0bright.wikispaces.com/ :thumbsup:

jvdbossc
13th December 2009, 09:36
might be the thing to do - will pm a chemist about Hydrogen Peroxide for the translation in Dutch and to check I can get it.:coffee:

arnljot
13th December 2009, 11:29
Just go to your local pharmacy. It's a scientific name they understand. In norwegian it's Hydrogen peroksid. So in duch I guess it's hyjdrogën paroksjidj.... :-P

jvdbossc
13th December 2009, 11:47
I alway's check when mixing such products with someone. It can save your life..