Found Apollo 1240 -> 1260 upgrade kit

Status
Not open for further replies.

8bitbubsy

Member
AmiBayer
Rating - 100%
34   0   0
Joined
Oct 31, 2009
Posts
282
Country
Norway
Region
-
It does have mach131...
All I need is the power regulator and the flash ROM! :)
 
Last edited:
PG from A.org is your man for this type of thing. If you PM him he may be able to help you.
 
I can make one for you, but it will take few days.
Also please confirm if you really want it, and you are willing to pay for it,
as i ve done one before for one a.org member, and at the end he didnt want it
and he dont even reply to my pm.
(i will not say his name :/).

i can also make a 3.5V regulator for overclocking.
you can see my homemade regulator here http://www.amiga.org/gallery/index.php?n=2938
 
I can make one for you, but it will take few days.
Also please confirm if you really want it, and you are willing to pay for it,
as i ve done one before for one a.org member, and at the end he didnt want it
and he dont even reply to my pm.
(i will not say his name :/).

i can also make a 3.5V regulator for overclocking.
you can see my homemade regulator here http://www.amiga.org/gallery/index.php?n=2938
Absolutely! :wooha:
I am willing to pay for it. I'm interested in the normal power regulator (e.g. not for overclocking!)...
Do you have a 32pin 1Mbit IC EPROM? If so, can you flash the apollo060 ROM (128kB) for me too? :D

Definitely interested, PM me what it will cost.
 
Last edited:
i should have last spare 27C010 for it.
how about 15€ + shipping (for regulator and burner eprom) sounds ?
of course both items will be tested in my A1260 (y)
 
i should have last spare 27C010 for it.
how about 15€ + shipping (for regulator and burner eprom) sounds ?
of course both items will be tested in my A1260 (y)
Deal :)
Shipping will be to Norway though, but it should fit good in an envelope-- just put the chip in a little chip holder or something (plastic)...

Let me know when you have the items done, and I'll give you my address in a PM.
I'll pay right now, do you accept paypal? :D
 
i will use antistatic tube, as its more suitable :D
paypal is practically only method what i can use :/
it will take few days to make regulator, as i need to find my etching kit first :D
 
Status
Not open for further replies.
Back
Top Bottom