PDA

View Full Version : For Sale New LED pcb for the A1200, self made!



Pages : [1] 2

vibros
27th September 2013, 14:30
Hello,

i put on sale this item. At the moment the colors are blue, red and white and the PCMCIA activity LED is in the middle of the harddisk activity LEDs.

The price is 7.0 Eur (it was 6.0 Eur) for the whole article (with cable), or 2.5 Eur for the empty PCB.

Regards
Stefano

DutchinUSA
27th September 2013, 15:15
Very cool ! I would like to order 2 from you :thumbsup:

Sending PM :)

rainbowat
27th September 2013, 15:31
I am interested in 2
PM Sent

stefan_st
27th September 2013, 15:47
declaring interest in 4 items
will send pm

vibros
27th September 2013, 17:29
Hello,

@DutchinUSA

two item are for you! Monday they are ready.

@rainbowat
@stefan_st

the items are reserved for you, but i need a few today: i wait some parts.

oldman1000
27th September 2013, 18:17
interested 1x

emm853
27th September 2013, 18:50
interested in 1 sending pm.

holzroller
27th September 2013, 18:55
intrested in one piece too, pm sent

RobA1200
27th September 2013, 20:07
hi

can I have one!

pauljh
27th September 2013, 20:08
Declaring interest!

AndyLandy
27th September 2013, 20:09
Do you know if this will work with A600 also? If so, I would be interested in one!

:thumbsup:

vibros
27th September 2013, 20:30
Hello,

you will be received this part, someone soon and someone later.

@AndyLandy,

i think no: A600 has a different PCB. I need to have the dimension, then i can made the A600 version.

Regards
Stefano

ChrisUnionNJ
27th September 2013, 20:36
:interested: in 2 please with shipping to 07083 :thumbsup:

:coffee:

RetroAmi.com.pl
28th September 2013, 06:57
Interested in 5 pcs.

Golem
28th September 2013, 12:54
I'll take one please.

vibros
10th October 2013, 19:41
Hello,

i have printed some PCBs, but i wait some parts to cover your request.
I have bought cables to much short, then i need at least on month to obtain the new parts. But if you cant wait, i have this solution, with ugly grey cables.

Regards
Stefano

Xanxi
10th October 2013, 20:21
Interested in two please.

Are you also still thinking of the A600?

ruireispt
10th October 2013, 22:25
Interested in 1 unit please shipped to portugal :)

gueri
11th October 2013, 01:43
Declaring interest for 1 unit! Send PM.

thecollector
11th October 2013, 02:46
Declaring interest in 1 unit as well! Will send PM. :D

DutchinUSA
7th November 2013, 13:19
"Hello,

@DutchinUSA

two item are for you! Monday they are ready.

@rainbowat
@stefan_st

the items are reserved for you, but i need a few today: i wait some parts."

Still waiting :D .. but I seen the pictures you have up, the one to the left is fine, red, white and blue .. though I would have taken any of them :)

Sending another PM :thumbsup:

ElectroBlaster
7th November 2013, 13:27
Now that is one great solution!

I like how you sorted the led problem out.

Im gonna go for it, please put me down for 1 at the moment :)

One day I will actually finish my a1200 re-build, starting to amass a huge pile of boxes with parts lol

vibros
7th November 2013, 13:38
Hello,

all of you will be served! I wait some parts to assemble all together.

Regards
Stefano

TroelsDK
7th November 2013, 13:53
Interested in 2 :)

Sending PM

vitux
8th November 2013, 18:12
interested in 1
What is the payment method?

PM send

bdb
8th November 2013, 18:29
Interested and sending pm.

VoltureX
8th November 2013, 20:11
Interested in 1 sample.

Sending PM now.

Jakob

moijk
8th November 2013, 21:30
I'd take one as well. if possible

badekar
8th November 2013, 23:36
Declaring interest in one whole article.

paalrosen
9th November 2013, 12:06
Interested and sending pm

Hendrik
9th November 2013, 16:27
declare interest in two

Nick1977
13th November 2013, 08:23
Declare interest in one whole article.
PM to send.

vitux
15th November 2013, 12:39
Not receive any reply

Nick1977
15th November 2013, 14:03
Me neither.

vibros
15th November 2013, 18:38
Hello,

all of you will be received this item. At the moment i wait some parts to complete the first orders.

Regards
Stefano

WHiZZi
16th November 2013, 00:06
Interest in 1 item, sending PM

Retrofan
16th November 2013, 01:11
Interested in 1. PM sent yesterday.

ChrisUnionNJ
16th November 2013, 02:57
:interested: in 2 please with shipping to 07083 :thumbsup:

:coffee:


I have to change mine to 1 please..:thumbsup:

Nick1977
18th November 2013, 10:39
Hello,

all of you will be received this item. At the moment i wait some parts to complete the first orders.

Regards
Stefano

Nice:thumbsup:

vibros
22nd November 2013, 18:03
Hello,

i have ready 12 pieces, with the follow combination of colors:

n.5 green (power), red, red
n.6 blue (power), white, red
n.1 blue (power), red, red

The cost of the postage of about 1-2 pcs is

3.0 Eur to Europe
3.8 Eur to America (Canada and USA)
4.8 Eur to Australia

For the first 24 hours i will respect the order of requests of this thread.

Please, keep in mind that this product is tested and reliable, but it is hand made and not perfect like a machine can.

Thanks in advance.

Regards
Stefano

TroelsDK
22nd November 2013, 19:11
Cancell mine for the monent, I'm broke :( I hope you have more in a few weeks :)

oldman1000
22nd November 2013, 19:56
declare interest in one

pm

ChrisUnionNJ
22nd November 2013, 20:12
I will take a n.6 blue (power), white, red sending PM..:thumbsup:


:coffee:

vibros
22nd November 2013, 20:37
Very cool ! I would like to order 2 from you :thumbsup:

Sending PM :)

Hello,

blue, white, red x 2

regards
Stefano

---------- Post added at 21:35 ---------- Previous post was at 21:34 ----------


I am interested in 2
PM Sent

Hello,

blue, white, red
blue, red, red

Regards
Stefano

---------- Post added at 21:37 ---------- Previous post was at 21:35 ----------


:interested: in 2 please with shipping to 07083 :thumbsup:

:coffee:

Hello,

blue, white, red x 1

-----

@ruireispt (http://www.amibay.com/member.php?u=6592)

hello,

blue, white, red x1

-----

@xanxi

hello,

green, red, red x2

-----

@oldman1000

hello,

red, white, blue x1

rainbowat
22nd November 2013, 21:13
payment sent
Thank You mate:thumbsup:

ChrisUnionNJ
22nd November 2013, 21:41
Payment sent...:thumbsup:

:coffee:

ruireispt
22nd November 2013, 23:29
Declaring interest in one blue white red shipped to portugal. Pm me with details please

DutchinUSA
23rd November 2013, 02:13
Payment sent for 2 :thumbsup:

WHiZZi
25th November 2013, 12:50
I'm interested in one "n.6 blue (power), white, red" + sending to NL. Can you let me know the total amount in PM ... Tnx!

hsc
25th November 2013, 14:18
Hello nice led board, interest in 1 piece at the moment in green,blue,red when you have stock no problem how many time you need please PM me when you have thanks stefano

Enviado desde mi GT-I9505 usando Tapatalk 4 Beta

J.T.Kirk
25th November 2013, 17:24
PM sent about one piece.

ruireispt
25th November 2013, 17:28
payment sent:thumbsup:

RobA1200
25th November 2013, 21:07
Hi could I have a blue red red?

vibros
26th November 2013, 02:41
Hi could I have a blue red red?

Hello,

yes, but next month.

Regards
Stefano

vibros
27th November 2013, 13:36
Hello,

DutchinUSA, rainbowat, ChrisUnionNJ, ruireispt, xanxi, oldmann1000

your items are sent today!
Many thanks for your request!

There is ready two LED with the following colors

green (power), red, red

other combinations are ready the next month.

Regards
Stefano

DutchinUSA
27th November 2013, 13:49
Many thanks for making these .. I think it's awesome :thumbsup:

Foul
27th November 2013, 20:05
Any Left ? Interested by Original one :)

vibros
27th November 2013, 20:29
Any Left ? Interested by Original one :)

Hello,

i have a new part with green, red, red combinations of colors, similar to the original, but more brilliant.
I have an used and original part, 100% working, that i can sell for 4 Eur + postage.

Regards
Stefano

holzroller
27th November 2013, 20:42
intresteted in two! PM sent!

Foul
27th November 2013, 20:43
Interested only by the Blue/White/Red.. used or not ;)

I'm not in hurry... ;)

vibros
27th November 2013, 21:02
Interested only by the Blue/White/Red..

...the french flag...

---------- Post added at 22:02 ---------- Previous post was at 21:53 ----------

Hello,

all the people that have declared interest in this item some week ago, but dont have specified the colors of the leds and dont have replied in this days, can tell me, if interested, what combinations of colors wish to have.

The colors are

blue, green, red and white.

Regards
Stefano

Sorry for my bad english!

soeter04
27th November 2013, 21:14
We all speak retro mate, don't worry about the english, and keep up the great work. :)

As discussed, i'd like one with all blue leds. Thanks!

Nick1977
28th November 2013, 14:10
Interested in Red/White/Blue.
Thanks!

vibros
28th November 2013, 15:03
Hello,

ok, i collect all your requests. To specify the colors is the best way.
By the way, the first color is the power led.

Regards
Stefano

Foul
28th November 2013, 15:38
as i said on MP :

Interested by the same as seen on first post : Blue/White/red :

Thx :)

hsc
28th November 2013, 20:55
Are you count me for 1 unit in the colours I want?

Enviado desde mi GT-I9505 usando Tapatalk 4 Beta

vibros
28th November 2013, 21:05
Hello hsc,

sure, all the guys that have sent the desired combination of colors will be served.
Otherwise there is two units ready with the following colors

green (power), red, red

Regards
Stefano

RetroAmi.com.pl
28th November 2013, 21:35
Hi, I'm interested in 3 units with colors: power-green / fdd - blue / hdd - red.

Nick1977
29th November 2013, 10:01
Hello,

ok, i collect all your requests. To specify the colors is the best way.
By the way, the first color is the power led.

Regards
Stefano

may i ask for a change if possible?
I would like blue (power)/ red (floppy) / white (hard).
thanks!

Rakeim132
29th November 2013, 11:45
Interested in "n.6 blue (power), white, red", yeah the French flag :p
Shipment to France if already available or to Australia if after January.
Thanks.
Will send PM shortly...

...and yes: what about the A600 ? I would need 4 for this one... :lol:

vibros
29th November 2013, 14:48
Hello,

all ok about all your requests!

About the A600 led PCB, i have a draw but without the dimensions. I need to know the measure of the two sides of the original PCB and the diameter of the hole for the screw. That's all. Another problem is the price: the plug (that is like the floppy power plug) is hard to find and not cheap. Amigakit sell the original part to 4.9 Eur/pcs, but i think, i can't this price.

Regards
Stefano

Rakeim132
29th November 2013, 19:24
I will check the dimensions for you today.

If you can make the PCB for A600 and install the LEDs, we also can desolder our cables and solder it on our new PCB... I can do myself.

Rakeim132
2nd December 2013, 02:44
Hi Vibros:

On my Rev.3 LED PCB on my A600 Rev.2D:

PCB dimensions are 46 mm x 9 mm.

Screw hole (only one) is diam. 3 mm and is located 13 mm from PCB small side, between the 2 yellow LEDs (LED 3 and LED 2).

The screw hole seems centred on the PCB width.

Hope it helps.

vibros
14th December 2013, 14:13
Hello Rakeim132,

many thanks! I will try to made a PCB.

Here, i have two items ready, with the colors green/red/red, if you are seriously interested on this, i am by the event "Pianeta Amiga", sunday 15, for a few hours.
Please, PM me.

Regards
Stefano

Rakeim132
14th December 2013, 14:18
Still interested in 2 x Blue / White / Red for A1200 and 2-4 A600 versions of same configuration... When available ! :D

Will PM tonight.

uccio69
14th December 2013, 16:00
Interest to 2xblue-white-red for amiga 1200

Nick1977
14th December 2013, 16:39
Hi vibros, i am still interested in a blue (power)/ red (floppy) / white (hard) cable.
thanks!

ungatonipon
14th December 2013, 17:04
Hello,

I want two;

1. Blue, White, Red (power, floppy, hard drive)
2. Red, Blue, Blue (same)

Thanks a lot in advance :)

Xanxi
20th December 2013, 19:34
I got my led boards earlier this month with no problem.
Thanks vibros.
Leaving feedback now.

vitux
25th December 2013, 17:27
For me, not yet received a reply vibros

tihopop
25th December 2013, 22:45
One for me as well...

Killerchicken
26th December 2013, 12:53
Is there an amiga500 version?

Would be interested


10 PRINT "TALKPAD" : GOTO 10

hsc
26th December 2013, 18:42
Hello I still waiting??


do you forget me?


thanks

vibros
27th December 2013, 07:01
Hello,

i have dont forget. I wait some parts.

Regards
Stefano

J.T.Kirk
29th December 2013, 10:53
Hi Stefano, hope that you didn't forget me. :)

kaini
30th December 2013, 12:52
Ciao,Stefano i tempi di attesa per il prossimo batch a quando?

vibros
30th December 2013, 14:30
@Kaini,

i dont know, it depend on the postal service, but you will receive what you wish to have!

I am ready to build some parts, and i start to serve the people that have asked for a precise set of colors:

whizzi
hsc
phantom
RobA1200
Foul
holzroller
soeter04
Nick1977
RetroAmi.com.pl
Rakeim132
uccio69
ungatonipon

Please confirm your request.

Happy new year!

Regards
Stefano

J.T.Kirk
30th December 2013, 15:04
Hi Stefano, I confirm my request as we talked via pm: BLUE LED for Power, and GREEN LEDS for Floppy and HD.

optiguy
30th December 2013, 15:54
Any chance you could do something like this for the A3000?

vibros
30th December 2013, 17:43
Hello,

i have drawn something for the A600 and the A3000, but i need more time to build this parts.

Regards
Stefano

soeter04
30th December 2013, 19:28
Confirmed, all blue lights :)

vibros
31st December 2013, 07:33
Hello,

you can specify the color of the PCMCIA activity LED, otherwise i will make the choice for you.

Happy new year!

Regards
Stefano

uccio69
31st December 2013, 07:56
I confirm my request....

kaini
31st December 2013, 09:18
Hi,i declare my interest.

Happy New Yaer

Foul
2nd January 2014, 09:26
Hi ! and Happy New Year !!

Still interested by blue-white-red one !!

Thx :)

RobA1200
2nd January 2014, 12:57
hi

thanks for pm! still interested!

blue white white if possible!

thnaks!

rob

vibros
2nd January 2014, 14:08
Hello,

whizzi, hsc, Phantom, Foul, RobA1200, nick1977,

your articles are ready.

@soeter04,

please, wait a couple of days;

the other guys need to wait a little bit more.

The cost of the postage (no tracking service) of about 1-2 pcs is

3.0 Eur to Europe
3.8 Eur to America (Canada and USA)
4.8 Eur to Australia

Paypal as gift if possible.

Best regards
Stefano

Please, if i dont have replied by PM, please dont worry and place here your request with the colors that you wish to have!

Foul
2nd January 2014, 14:12
pm for paypal adress or here ? :)

WHiZZi
2nd January 2014, 20:41
Money sent :thumbsup:

Foul
2nd January 2014, 20:48
Sent!

Thx :)

J.T.Kirk
2nd January 2014, 21:56
PM sent about payment details.

obiwan
3rd January 2014, 05:39
Hi, Im interest. 2 pcs. Thanks.

Odoslané z LG-P710 pomocou Tapatalku

Nick1977
3rd January 2014, 09:07
Payment sent!

vibros
3rd January 2014, 12:11
Hello,

whizzi, RobA1200, Foul, Nick1977,

your items are sent today.

Regards
Stefano

J.T.Kirk
3rd January 2014, 13:16
Payment sent on my behalf.

ghoul
3rd January 2014, 13:34
Interested in 1 unit (BLUE - POWER) (WHITE - FDD) (RED - HDD/PCMCIA)

PM SENT:thumbsup:

Nick1977
4th January 2014, 12:03
Hello,

whizzi, RobA1200, Foul, Nick1977,

your items are sent today.

Regards
Stefano

Nice!:thumbsup:

ungatonipon
5th January 2014, 12:26
Sent the PM today.

hsc
5th January 2014, 16:20
Payment Sent

multivac
5th January 2014, 19:27
Interested in
1 blue (power)/ red (floppy) / Red(hard) / Green(PCMCIA)
1 green, red, red, PCMCIA-Green (Same as original but PCMCIA different colour)
PM sent

Thanks

Vyothric
6th January 2014, 03:33
Interested in 1 (Blue/White/Red).

vibros
7th January 2014, 11:24
Hello,

Phantom, hsc,

your items are sent today.

To all the people: please wait! All of you will be served.

Regards
Stefano

J.T.Kirk
7th January 2014, 18:13
Thanks for the info.

WHiZZi
9th January 2014, 20:01
Item received today and build in my miggy :)
http://distilleryimage6.ak.instagram.com/934a8ea4795911e3927d12fd8d397d26_8.jpg :thumbsup:

ws1968
9th January 2014, 22:35
Declaring interest! Sending PM

Nick1977
10th January 2014, 12:04
Item received today and build in my miggy :)
http://distilleryimage6.ak.instagram.com/934a8ea4795911e3927d12fd8d397d26_8.jpg :thumbsup:

Nice!
can't wait for mine to come!

Nick1977
10th January 2014, 22:37
Just got my cable.my preeecious!!
i will install it this weekend and upload some pics.:D

Nick1977
11th January 2014, 17:28
As promised...Cd32 splash screen obviously for show off purposes:D
Thanks vibros.Nice work!

http://s1288.photobucket.com/user/JOSM1980/media/photo2_zps3f382166.jpg.html?filters[user]=136695210&filters[recent]=1&sort=1&o=0 (http://s1288.photobucket.com/user/JOSM1980/media/photo2_zps3f382166.jpg.html?filters[user]=136695210&filters[recent]=1&sort=1&o=0)
http://i1288.photobucket.com/albums/b500/JOSM1980/photo2_zps3f382166.jpg
http://s1288.photobucket.com/user/JOSM1980/media/photo2_zps3f382166.jpg.html?filters[user]=136695210&filters[recent]=1&sort=1&o=0

Lochban1088
12th January 2014, 00:17
Ill take 2 or 3 depending on price please pm me with prices please

J.T.Kirk
15th January 2014, 16:05
Received mine today, thanks. :)

liviux76
15th January 2014, 19:34
Hello Vibros,

I am quite sure you will like to see your creation "adapted" in order to work in an A1200 Tower...

Pretty cool, isn't it? :)

And, by the way, I am going to leave the feedback for our transaction... please, do the same as soon as you can... :thumbsup:

Foul
15th January 2014, 20:36
Mine arrived last week ... no problemo ;)

:thumbsup:

Rakeim132
21st January 2014, 11:03
Hi Vibros, I think I've expressed interest in Blue/White/Red version, 2 items (maybe only 1...), what should I do to confirm my interest ? Send PM ? Send shipment address and payment ?

Thanks mate. Will send PM now to check. :D

ghoul
21st January 2014, 12:19
Hmm no response from the seller :( Can you let me know please when you can send me this one? :thumbsup:



Interested in 1 unit (BLUE - POWER) (WHITE - FDD) (RED - HDD/PCMCIA)

PM SENT:thumbsup:

vitux
27th January 2014, 13:17
I do not understand, I'm approximately number 16 on the list.
Send message and still no response.

Rakeim132
28th January 2014, 11:19
No reply either... :confused:

roy_bates
28th January 2014, 11:21
Hello Vibros,

I am quite sure you will like to see your creation "adapted" in order to work in an A1200 Tower...

Pretty cool, isn't it? :)

And, by the way, I am going to leave the feedback for our transaction... please, do the same as soon as you can... :thumbsup:


thats really nice,although you didnt really need to do all that for two led's

liviux76
28th January 2014, 11:46
Hello Vibros,

I am quite sure you will like to see your creation "adapted" in order to work in an A1200 Tower...

Pretty cool, isn't it? :)

And, by the way, I am going to leave the feedback for our transaction... please, do the same as soon as you can... :thumbsup:


thats really nice,although you didnt really need to do all that for two led's

@ roy_bates
You are right, that was a friend's A1200T and it had 2 leds that didn't work properly... I just had to fit one blue led and one red led in place of the 2 original leds...

@ thread
A few days ago I wrote a PM to Vibros without receiving a reply... he's probably not reading the emails...

vibros
29th January 2014, 03:28
Hello,

there is a long delay to receive some parts from the far est. Sorry for that!
All of you will be served!

Best regards
Stefano

Lochban1088
6th February 2014, 18:48
Ill take 3 Red white blue in any order thanks :)

linkeboa
6th February 2014, 20:17
Declaring interest in two. PM sent.

fusion
7th February 2014, 17:31
Are these still available? PM sent but no reply? Thanks.

sneeker
17th February 2014, 22:05
Declare Interest in one, Sending a PM

Wachi
18th February 2014, 10:40
Are they still available?
I declare my interest in two units, send a PM, Thanks.

ElectroBlaster
18th February 2014, 12:34
I am really starting to loose my marbles :(

I wanted one of these and have forgotten! Seem to be doing this alot.

So if there any left I would like two please. If not then no problems. I should be on the ball tbh.

rikbliz
18th February 2014, 13:59
Declaring interest. PM sent.

vibros
28th February 2014, 11:42
Hello,

many thanks for your interest in this item. I was in trouble to obtain some parts (some LED was lost), then i have thinked to print with machinery this PCB, but the cost im my area are much high, despite the card has a size very small.

At the moment i am ready to build five pcs.

Soeter
RetroAmi.com.pl
Oldman1000

please confirm your interest!

@all

please read carefully the first post: my solution include a LED to show the activity on the PCMCIA slot. To activate this function you need a solution like this

http://www.doobreynet.co.uk/extraled.html

I repeat, all of you will be served, but i need time.

Many thanks

Best regards
Stefano

soeter04
28th February 2014, 12:16
Thanks for the update, Stefano.
Consider my interest confirmed :)

FrenchCNX
28th February 2014, 13:10
PM sent for 2 pieces ! red or green / white / blue :thumbsup:

oldman1000
28th February 2014, 13:44
confirmed

britlord
28th February 2014, 14:16
Declare Interest in one, Sending a PM

vibros
4th March 2014, 06:14
Hello to all,

payment received from soeter04, the item will be shipped ASAP.

To respect the order of requests

Holzroller
Rakeim132
uccio69
ungatonippon
vitux
kaini
obiwan
ghoul

then gueri if still interested

please, confirm your requests, otherwise i go forward.

Regards
Stefano

obiwan 2pcs.

uccio69
4th March 2014, 07:00
Interest withdraw

kaini
4th March 2014, 09:08
Declaring interest.

Inviato dal mio GT-I9505 utilizzando Tapatalk

Skellionz
4th March 2014, 17:56
Hey im interested in one of these please :) is it possible to swap the power and the hdd colour too ?

vibros
4th March 2014, 18:43
Hello,

to all the people interested on this item! Please wait a couple of weeks!

Best regards
Stefano

vibros
5th March 2014, 10:37
Hello,

soeter04, obiwan, oldman1000, your items are sent today.

Regards
stefano

Wachi
6th March 2014, 15:18
Consider my interest confirmed :)
I declare my interest in two units, send a PM, Thanks.

obiwan
7th March 2014, 18:53
Items received today, tommorow will install. Thanks.

Odoslané z LG-P710 pomocou Tapatalku

krisu13
8th March 2014, 04:16
Declaring interest PM on its way.
Kris U.

Rakeim132
8th March 2014, 06:17
Confirming my interest. Can you send me payment details and total cost for shipment to France?

Wachi
9th March 2014, 12:14
Confirming my interest for two units. Can you send me payment details (preferably by PayPal) and the total cost for shipping to Spain?

vibros
9th March 2014, 14:39
Hello,

please, wait two weeks. I wish to have all the parts here, then i start to built your requests and to ask for the payment.

Regards
Stefano

Skellionz
9th March 2014, 22:15
can you post a list of the current people in your list that have requested but not received? :)

obiwan
10th March 2014, 12:18
Installed two days ago. Everythink works perfect, looks sharp. Thanks.

Odoslané z LG-P710 pomocou Tapatalku

vitux
10th March 2014, 14:16
I am still interested.
Please, answer me the question I asked him privately.
Thanks

soeter04
10th March 2014, 15:05
Item received, thanks Stefano.
Leaving feedback in a minute

oldman1000
15th March 2014, 09:00
thanks Vibros for the good support :thumbsup:

I plugged it into my A1200 built unfortunately cf pin is missing :sad:

vibros
15th March 2014, 14:25
thanks Vibros for the good support :thumbsup:

I plugged it into my A1200 built unfortunately cf pin is missing :sad:

Hello,

i will made ASAP a list of the requests!

oldman1000,

i have not understood the problem. You can sent here a picture.

Regards
Stefano

baz
15th March 2014, 14:47
interested in two please:)

oldman1000
15th March 2014, 15:01
i missing the pin from my A1200 mainbord

Amilord
16th March 2014, 17:22
Interested For 1 unit. PM

J.T.Kirk
18th March 2014, 14:46
Send mine back to the seller for reconstruction.

Skellionz
25th March 2014, 18:08
any updates on this please?

miggybaz
25th March 2014, 20:54
Hi

I would like two please. Thank you

vibros
26th March 2014, 03:50
Hello,

Phantom, item received.

@All

when i will receive all the parts, i will post here all the infos.

Regards
Stefano

lokinetworks
26th March 2014, 04:39
:interested: sending PM

embedder
26th March 2014, 07:33
Are there any left?
If yes: having interest and will take 2 pieces.

Sending PM.

J.T.Kirk
26th March 2014, 09:11
Hello,

Phantom, item received.

Great. Inform me how it goes, thanks.

finnr
26th March 2014, 16:02
I am interested in 1, whenever they are ready. No hurry :)

FreakyDan
29th April 2014, 19:50
Im interested in one to. Are they still available??

Wachi
29th April 2014, 22:17
Hi, any news? :smile:

Mikeata
29th April 2014, 22:58
At the moment the colors are blue, red and white and the PCMCIA activity LED is in the middle of the harddisk activity.
Any item left, Stefano?
I'm interested. :)

FrenchCNX
29th April 2014, 23:58
I expect news too !!! any ??? :(

vibros
30th April 2014, 09:17
Hello,

the news are that some parts to complete the item are lost and not arrive to me!
That mean, i need more time. Sorry for that!

Regards
Stefano

Virtualnut
3rd May 2014, 04:56
interested in 1, let me know when u need details
ty

finnr
3rd May 2014, 12:22
Me too, interested in 1, let me know when u need details
ty

rikbliz
6th May 2014, 15:53
Still interested

vibros
14th May 2014, 07:29
Hello,

finally some items arrive! I have made at the moment 6 pcs, with blue-power, white-floppy and red-Harddisk, with PCMCIA-activity-led ready to work (but your motherboard need modification, take a look here http://www.doobreynet.co.uk/extraled.html).
Keep in mind that this item is 100% hand made, so imperfections are normal things!
It work 100% ok without strange issue!

Sadly, i need to change the price from 6 Eur/pcs. to 7 Eur/pcs.

I will post here a list of the buyers with respect of the date, but if rikbliz, Waki and FrenchCNX confirm they interest, they are first in line.

Thanks in advance!

Regards
Stefano

Jaxx
14th May 2014, 09:55
Declaring interest in one shipped to Hungary. Please PM me with details if still available.

Mikeata
14th May 2014, 10:00
but your motherboard need modification
Hello Stefano,
are they only usable, when making this modification?

vibros
14th May 2014, 14:58
but your motherboard need modification
Hello Stefano,
are they only usable, when making this modification?

Hello,

only if you wish to see the activity of the PCMCIA port. Take a look at the pictures of my last post: without modification, you will see only the activity of the harddisk on the red line, otherwise, the led in the middle will show you the use of the PCMCIA port.

Regards
Stefano

Mikeata
14th May 2014, 15:11
OK. So no floppy activity will be seen?

vibros
14th May 2014, 15:39
OK. So no floppy activity will be seen?

You will see all, but if you modify your motherboard, you will see also the activity of the PCMCIA port on the led in the middle of the red strip.

Regards
Stefano

vibros
15th May 2014, 02:50
Hello,

here the list

rikbliz
Holzroller
Rakeim132
uccio69
ungatonippon
vitux
kaini
ghoul
gueri
skellionz
krisu13
baz
Amilord
miggybaz
lokinetworks
embedder
finnr
FreakyDan
Mikeata
Virtualnut
Jaxx

Thank in advance for the support!

Regards
Stefano

Wachi
15th May 2014, 22:47
Hello, you put in the Waki list, I guess it meant to me ...........
Interest Confirmed ....
2 units for A1200
and if it can be
1 unit for A500
I hope to answer income from PayPal.
greetings and thanks

Mikeata
15th May 2014, 22:55
here the list
...
Mikeata
...
Interest withdrawn.

Regards :)

FrenchCNX
15th May 2014, 23:13
Hi !

I'm very interested for 2 pieces ! :roll:

Green/white/blue is ok for me.

Cheers.(Check your PM please Stefano ;) )

Vyothric
20th May 2014, 20:16
Not on the list. I posted in January (see page 12).

vibros
20th May 2014, 22:07
Hello Vyothric,

please dont worry, no one in the list has replied :-) You are first in line, if you wish.

Regards
Stefano

Virtualnut
21st May 2014, 05:44
still interested

ws1968
21st May 2014, 06:57
I am also still interested! Count me in for one.

Verstuurd vanaf mijn Nexus 5 met Tapatalk

Lochban1088
21st May 2014, 09:19
ill take 2 just pm me when you need the money

HeZoR
21st May 2014, 20:43
Hi, I'm interested in 2 units, colors: power-green / fdd - blue / hdd - red and n.6 blue white red, destination: Greece

Sent from my GT-N7000 using Tapatalk

Vyothric
22nd May 2014, 14:41
Hello Vyothric,

please dont worry, no one in the list has replied :-) You are first in line, if you wish.

Regards
Stefano

Alright. Well I'm still interested so let me know.

finnr
22nd May 2014, 23:53
Still interested :)


Sent from my iPhone using Tapatalk

Virtualnut
26th May 2014, 11:15
any news on these?

vitux
26th May 2014, 13:55
I still interested and again I expect answers

vibros
26th May 2014, 18:05
Hello,

vitux, you are in the list, so please, you will be served!
Two items are sold to Wachi. Another items are sold this last week end, outside Amibay, for logistic reason: i was down with the internet connection!

I ask you a little bit of patience.

Regards
Stefano

HeZoR
26th May 2014, 18:10
Waiting in queue

Sent from my GT-N7000 using Tapatalk

rikbliz
28th May 2014, 09:14
Hi, I'm still interested.

Wachi
29th May 2014, 21:53
Installed and running my new LED.
A fast and good packaging.


Very good job Stefano
A greeting and thanks:)

vibros
29th May 2014, 22:53
Hello,


Wachi, i hope the item has enough quality!

From the list

rikbliz
Holzroller
Rakeim132
uccio69

i wait your reply with the colors (red, blue, white and green).

Regards
Stefano

Skellionz
1st June 2014, 02:10
hey, im still interested in this i did ask a while back but never heard from you about wanting payment. Please add me to the list.

hdd red
fdd green
power blue

vibros
1st June 2014, 08:31
Hello,

Skellionz, please PM me with your desired colors.

Regards
Stefano

- - - Updated - - -

Hello,

sorry is sunday morning! Now i have read your post carefully.
Ok, when the part is built i will PM you.

Regards
Stefano

Skellionz
2nd June 2014, 03:45
ok thanks mate :) look forward to hearing from u

Virtualnut
2nd June 2014, 13:37
same as wachi for me :), red white and blue

gede
2nd June 2014, 17:40
Please add me to the list with the same as Virtualnut and wachi: red white and blue.

Thanks :)

rikbliz
2nd June 2014, 20:42
Payment sent

vibros
3rd June 2014, 10:19
Hello,

FrenchCNX, rikbliz, items sent today.

Regards
Stefano

- - - Updated - - -

Hello,

Skellionz, payment received, the item is ready and will be sent ASAP.

Regards
Stefano

ElectroBlaster
3rd June 2014, 22:49
Think maybe I wanted one some time back? I want two if this is possible?

Thanks :)

vibros
4th June 2014, 15:47
Hello,

skellionz, item sent today.

I will wait reply from the list (page 19) for about 24 hour, then i will start to serve the last requestes.

Regards
Stefano

vibros
5th June 2014, 16:54
Hello,

vyothric, ws1968, finnr, there is at the moment one unit, same as pictured on the post of Wachi (blue, white and red).

I wait a reply on PM.

To all the people that have received this item this week: i have made a little mistake. There is at least two type of desktop cover for the A1200, with two different dimensions for the holes of the LED board. There is a slight difference, and i have built this last parts with the cover that has the holes bigger. So, if you have the cover with the smaller holes, you can resent to me the item if you dont wish to try to install it. It pass but need more attention!

Sorry for that!

Regards
Stefano

vibros
6th June 2014, 15:14
Hello,

gede, Virtualnut, ws1968, your items are sent today.
ungatonipon, i wait your reply on PM.

Regards
Stefano

Jaxx
6th June 2014, 15:32
Hello,


i'm still interested (blue-power, white-FDD, red-HDD), and waiting for payment details.


Thanks.

HeZoR
7th June 2014, 22:21
still interested and waiting payment details

Sent from my GT-N7000 using Tapatalk

xspace
7th June 2014, 22:39
Salve,

interested waiting payment details

thanks...

rikbliz
10th June 2014, 22:03
Order received

ancalimon
10th June 2014, 22:07
Interested in two items with cable.

stevenfl
11th June 2014, 00:09
Want one sent PM.

Skellionz
11th June 2014, 12:25
got mine yesterday, havent had a chance to test it out yet though :)

Virtualnut
13th June 2014, 14:41
received today, will install later and leave feedback

Virtualnut
14th June 2014, 12:24
installed, tested and working, feedback left :D

Skellionz
30th June 2014, 04:39
Hey finally got around to installing it, question about the middle pcmcia light. Doesnt seem to do anything when a card is in? any idea as to when this light activates or is mine just faulty

vibros
30th June 2014, 09:38
Hello Skellionz,

have you tried this mod

http://www.doobreynet.co.uk/extraled.html

If yes, you can return to me the board. More on PM.

Regards
Stefano

Skellionz
30th June 2014, 19:47
thanks for quick reply mate ;)

vitux
21st July 2014, 01:00
I'm still waiting.
many months

sneeker
21st July 2014, 12:17
Me too, declared interest and pm'd months ago

vibros
21st July 2014, 13:27
Hello,

sorry for that! You will be served, but i need time: the boards are printed, but i wait some parts.

Regards
Stefano

HeZoR
22nd July 2014, 00:08
I'm still waiting.

vitux
22nd July 2014, 23:59
But you told me I was ready to build my unit

Moksud.com
23rd July 2014, 12:09
Declaring Interest. PM Sent

obiwan
12th August 2014, 16:41
Today I finished PCMCIA LED mod.


https://www.youtube.com/watch?v=XqJn-hVwXkw

vibros
12th August 2014, 18:45
Hi obiwan,

many, many thanks! It is very nice! I have it never tested :-)

@all,

cooming soon the new parts!

Regards
Stefano

obiwan
12th August 2014, 19:14
"Knight rider" mod. :D

Springycz
12th August 2014, 19:25
Good job! After waching the latest Night Rider Mode commercial :D I'd like to declare interest in two pieces.

anemo
13th August 2014, 08:57
Hi Vibros,

Cool project! I'm have a question about the fitting. I measured the square holes for the LEDs on my 1200 and they are about 16x2.3mm. Are you using three 5x3mm square LEDs in line for this replacement?

vibros
13th August 2014, 13:49
Hello,

it fit without the need of modification. The dimensions are 5x2mm.

Regards
Stefano

anemo
13th August 2014, 14:48
Vibros: Thank you for the swift answer. I now realize I accidentally wrote "5x3mm" instead of "5x2mm" :)

Great work!

gounderset
14th August 2014, 21:18
Hi!
Im interested in one Amiga 1200 led. Sending you a PM.

Regards
Geir Ove

Foul
15th August 2014, 16:42
Interested by one !

HD Led : Blue
Floppy Led : white
Power Led : Red

Possible ???

Thx !!!

vibros
15th August 2014, 17:55
Hello,

i cant reply to all of you, but i can say that all of you will be served with this LED board: i need only time!

Regards
Stefano

Foul
15th August 2014, 18:02
no prob at all ... there is no hurry ;)

vitux
3rd September 2014, 22:55
Please Can you give me a definitive answer?
I've been waiting a year, I need for install on tower. If you are not going to send me, tell me for find another led cable.
Thanks.

vibros
4th September 2014, 09:52
Hello vitux,

sorry for that! You will receive this part as soon as possible! I wait some parts to complete your and other orders!
At the moment the parts are not here but, i think, by the custom and the time, for release it and receive it, is undefined.
Please, PM to me and remember me the sequence of colors (you can specify the color for the PCMCIA port).

Regards
Stefano

vitux
4th September 2014, 12:10
But the 30th May 2014, I received this response from you, and you said he was ready:
"Hello,

i am finally ready to build your item. Please remember me what colors you wish (there is blue, red, white and green).
In the middle of the harddisk LED there is the LED of the PCMCIA port."

I also was on the list before some people who have already received.

vibros
4th September 2014, 16:37
Hello,

i have made confusion, sorry for that! Same thing for ungatonipon, i have not calculated some things! But i repeat, you will receive this item as soon as possible.

Regards
Stefano

Foul
4th September 2014, 16:42
and me ??? 6 posts above ;)

killernetdk
4th September 2014, 17:52
Hey

Can i have 7.

Best regards

vibros
11th September 2014, 13:20
Hello,

to all the people that as sent through PM a request: i will serve all of you with this item!
At the moment some parts are missing (i think they are stored by the custom), and i can't go forward to assemble this item.

Regards
Stefano