PDA

View Full Version : For Sale Arcade/Jamma Supergun



TheLastBandit
3rd December 2013, 22:37
Support for console controllers.
No pad hacks, just a simple adapter cable lets you connect the following controllers to the supergun. Player 1 & Player 2 can use different controller types simultaneously.


Sega Master System
Sega Megadrive (3 & 6 button)
Sega Saturn
Sony Playstation (Digital, Dual Analog, Dual Shock 1 & 2)
NES
SNES
PC-Engine
Turbo Grafx
Atari 2600
Neo Geo (no adapter cable required)

Any controller with more then 3 buttons have the extra buttons routed to the game board via the 'Expansion' connector and appropriate kick harness cable. Typically 'Start' & 'Select' on the controllers are mapped to 'Coin-Up' and 'Player Start'.

Multiple audio input sources
The audio source is user selectable between "Jamma / Stereo / MVS".
Jamma takes the amplified Mono audio converts it to line level and is routed to both Left and Right SCART outputs.
Stereo takes amplified stereo audio from the game board via the 'Expansion' connector and converts it to line level before routing to Left and Right SCART outputs respectively.
MVS takes the amplified stereo audio from the Jamma connector, converts to line level and sends it to the SCART Left and Right outputs.

Line-In jack overrides the audio switch 'S1' selection and passes the audio straight to the SCART outputs.

Line-Out jack lets you send the output audio to an external amp bypassing the SCART audio outputs.

Kickharness support
The 'Expansion' connector lets you connect to game boards to use Buttons 4,5,6 for Players 1 & 2. Button 4 is also mapped to the Jamma connector for MVS boards.

Other features
Easy adjustable thumb pots for RGB level adjustments
Terminal block power input so can use Jamma PSU or ATX PSU (with adapter cable)
Connector for Test/Service/MVS Select Up/MVS Select Down signals
All cable pinouts available so you can make your own adapter cables

80 for the Supergun
90 for the Supergun, ATX adapter and controller cable of your choice
10 for additional controller cables

P&P depends on where its shipping.

http://farm4.staticflickr.com/3684/9582383776_f6aacd68d1_c.jpg

Working here on a Sega STV board with Saturn and Playstation controllers is use, stereo audio picked up from the STV board.
http://farm4.staticflickr.com/3730/9573198894_09bd6f2f22_c.jpg

fitzsteve
3rd December 2013, 22:49
Declare interest in the adapter cables.

Will PM you shortly.

TheLastBandit
3rd December 2013, 23:31
Declare interest in the adapter cables.

Will PM you shortly.

The adapter cables will only work with this supergun. All the logic to do the controller conversion in on the supergun itself, the adapter cables are just the physical interface between the different connector types.

Sorry for any confusion :)

fitzsteve
3rd December 2013, 23:31
Oh, no worries. Good luck with your sale :thumbsup:

Killerchicken
4th January 2014, 23:22
Question:

Compatible to an 2 slot neogeo mvs arcarde?

If yes maybe interested

10 PRINT "TALKPAD" : GOTO 10

TheLastBandit
5th January 2014, 14:06
Question:

Compatible to an 2 slot neogeo mvs arcarde?

If yes maybe interested

10 PRINT "TALKPAD" : GOTO 10

Ya its compatible with all MVS board types.