PDA

View Full Version : For Sale ZIP to SIMM adapter for the A3000D



vibros
6th July 2014, 19:12
Hello,

i put this device for sale

http://www.amibay.com/showthread.php?62927-ZIP-to-SIMM-adapter-for-the-A3000&p=618383#post618383

For the first three pieces, i sell it in conjunction with a rework/fix of your motherboard, that will be sent to me.

The price of this device is 35 eur without the logic (4/8 mb)
or
40 Eur with the logic (4/8/16 mb)

See also this thread

http://www.amibay.com/showthread.php?49341-Rework-on-A3000-A4000-motherboard

Thanks in advance.

Regards
Stefano

vibros
24th July 2014, 15:45
Hello,

this offer is still on.

Regards
Stefano

vibros
4th August 2014, 16:53
Hello,

just to add this info: i have treated the printed surface with an anti-oxidation product. Today, the look of this card is the same of the first day: the tracks are shining.

Regards
Stefano

Fogg_80
5th August 2014, 10:59
Ciao Stefano,
interested in one with 16 mb, pending questions, PM later.:)

vibros
20th August 2014, 14:06
Hello,

this items are still for sale. If you have technical questions, please ask!

Regards
Stefano

vibros
2nd September 2014, 14:30
Hello,

i need to sell this items. For this reason, i ship it alone, without my old request to put by myself this item on the motherboard of the buyer.

The offer is the same:

40 Eur for the item (built with new parts and protected against oxidation) without the logic

or

45 Eur for the same item with the logic.

I will ship this item tested on my motherboard, with all the pins protected, to avoid complications during the assembly task.
This task is not complicated: this device go very easy inside the old fast ram sockets and the pins are long enough to avoid short between the motherboard and the underside, that is printed but not isolated.
You can attach and detach this device many time! The pins are soldered on one side, but they have the form of a nail, to avoid to tear up the pins from the PCB when you detach it from the motherboard.

I find this solution very comfortable: a wide variety of memory simm work with this device, and you need only one and not two!

Postage to EU with tracking service is about 7-9 Eur.

Regards
Stefano

optiguy
2nd September 2014, 15:16
Im interested in one

optiguy
2nd September 2014, 17:04
With the logic

vibros
3rd September 2014, 10:04
Hello,

postage to USA, in a small box with tracking service, is about 8 Eur. I dont know about the custom!
Please, if you are interested, PM to me!

Regards
Stefano

Fogg_80
3rd September 2014, 10:43
Hi, interested in one, PM sent.:)

optiguy
3rd September 2014, 12:22
Payment sent

vibros
3rd September 2014, 19:27
Hello,

@optiguy

many thanks! The item will be sent ASAP.

Regards
Stefano

vibros
6th September 2014, 16:24
Hello,

@optiguy, item was sent yesterday. More infos on PM.

Regards
Stefano

optiguy
18th September 2014, 16:25
recieved board, works great, many thanks

vibros
19th September 2014, 11:08
Hello,

a very good news!
There is two items for sale.

Regards
Stefano

vibros
23rd September 2014, 05:37
Hello,

@optiguy, a picture of the working adapter can help this sale!

Regards
Stefano

optiguy
24th September 2014, 19:40
The board works great, it can be tricky to get installed but with a little time and patients it worked out great.

http://i148.photobucket.com/albums/s12/optiguyzimo/20140917_215721_zpsi8bb9ea_edit_1411583518308_zpszyazokxu.jpg (http://s148.photobucket.com/user/optiguyzimo/media/20140917_215721_zpsi8bb9ea_edit_1411583518308_zpszyazokxu.jpg.html)

http://i148.photobucket.com/albums/s12/optiguyzimo/20140917_212812_zpsczg7npn2.jpg (http://s148.photobucket.com/user/optiguyzimo/media/20140917_212812_zpsczg7npn2.jpg.html)

vibros
24th September 2014, 20:06
Hello,

many thanks!

Best regards
Stefano

vibros
9th October 2014, 10:31
Hello,

two items are still for sale, with a little price reduction: 40 Eur with logic + postage and Paypal fee.

Regards
Stefano

Fogg_80
9th October 2014, 10:47
Hi Stefano,
payment until tonight with paypal gift.
OT
@all, sorry
scusami se prima non ti ho risposto, sono lieto per il piccolo sconticino visto che c' la crisi!
OT
Ciao ciao

Fogg_80
9th October 2014, 19:22
PM sent, please reply for payment. Thanks

Fogg_80
10th October 2014, 17:16
Payment sent :)

vibros
10th October 2014, 18:47
Hello,

@Fogg_80, many thanks! The item will be shipped ASAP.

Regards
Stefano

cowdog360
11th October 2014, 16:32
Hello,

What type of SIMM does this take? I have some 16M EDO SIMMs, 72 pin. Would those work?

vibros
11th October 2014, 19:18
Hello,

i dont know much about EDO. I think yes, it work. I know only that ordinary memory simm of about 4, 8, 16, and even 32mb work without problem. The last show only 16mb, and the first two work as 4 or 8 mb memory, with the help of a jumper on the adapter.

Regards
Stefano

Marco06
13th October 2014, 19:27
Hello Stefano,
Interested for one adaptator + GAL pls.

Regards,

Marco

vibros
13th October 2014, 21:50
Hello,

@Fogg_80, item sent today, with tracking service. More on PM.

@Marco06, ok, many thanks! The last unit is for you. Please, PM to me.

Regards
Stefano

Marco06
14th October 2014, 17:02
Payment sent ;)

vibros
14th October 2014, 19:29
Hello,

@Marco06, many thanks! The item will be shipped ASAP.

The three units are sold. Just to inform: the three buyers have paid this item at the same price, because the cost of the postage to USA was higher than calculated.

Regards
Stefano

vibros
17th October 2014, 18:57
Hello,

@Marco06, item sent yesterday. More on PM.

Regards
Stefano

vibros
26th October 2014, 15:13
Hello,

i wait the feedback from Fogg_80, that has received the part, but no news from you (even the feedback here on Amibay). I wish to know if all is ok.
About the shipment to Marco06, the part is stored by the italian custom from many days. I hope in a quickly release of the package.

Regards
Stefano

Marco06
27th October 2014, 18:18
Received today ! feedback on the way, thanks Stefano !
:p

vibros
28th October 2014, 03:36
Hello,

@Marco06, many thanks!

Regards
Stefano

vibros
28th October 2014, 07:32
Hello,

@Marco06, a couple of pictures of the working device are welcome! The site of the Post report that the item is not delivered :blased:

Regards
Stefano

Marco06
28th October 2014, 21:47
http://youtu.be/5mKfCxmYF9o

Good job Stefano: working with 1 simm 16Mb 60ns. :D

vibros
29th October 2014, 06:48
Hello,

@Marco06, many thanks! Your Video is well appreciated!

At the moment there is no more item for sale. Next Month i will build a couple of them.

Regards
Stefano

vibros
11th January 2015, 04:33
Hello,

i have build a new unit, that is for sale at the same price.

Regards
Stefano

baz
11th January 2015, 08:09
interested in one

vibros
12th January 2015, 19:24
Hello,

@baz, follow a PM.

Regards
Stefano

baz
12th January 2015, 20:52
pm replied

baz
24th January 2015, 18:49
Payment sent for amiga 3000 adapter

vibros
30th January 2015, 02:40
Hello,

item sent two days ago. More info on PM.

Regards
Stefano

vibros
19th February 2015, 14:10
Hello,

if someone is interested in this item, i can build another unit.

Regards
Stefano

vibros
19th February 2015, 18:25
Hello,

baz has received the device and installed it on his motherboard. Tested with an 8mb memory simm and a 16mb simm.

Regards
Stefano

baz
15th March 2015, 18:59
A job well done thanks vibros feedback left

vibros
30th June 2015, 10:22
Hello,

i have made another unit (tested with a 16mb memory simm) and, next month, another two units will be here on Amibay.com

If interested, please reply here.

Regards
Stefano

jostberg
1st July 2015, 11:47
Does it fit with accelerator installed?

vibros
1st July 2015, 12:49
Hello,

one of the goals of this device was the ability to stay with accelerator boards for the A3000! At least the A3640: on the post above there is some pictures related to this thing.

here
http://www.amibay.com/showthread.php?62927-ZIP-to-SIMM-adapter-for-the-A3000&p=618383&viewfull=1#post618383

Regards
Stefano

vibros
18th July 2015, 16:28
Hello,


i have for sale three units of this device. Tested and working, they all are reliable, protect against oxidation, and without strange issue like contact problem and so one.
The first device (most left on the pictures) was already here on the posts above: i sell it for 30 Eur, without logic. That mean, it work with a max af 8mb, but you can buy or burn a logic IC and add it whenever you want.
The quality of the PCB is not good: you can see some issues around the border of the PCB, but it is reliable (already tested and used on my A3000D motherboard).
The other two devices are better in quality: i sell it for 40 Eur/unit with the logic, or 35 Eur/unit without the logic.


The program inside the IC is here on Amibay: it is made by SpeedGeek and freely usable (if i have right understood...)

Regards
Stefano

vibros
3rd August 2015, 14:08
Hello,

no-one interested in this sale?

Regards
Stefano

idr
3rd August 2015, 20:51
Pretty sure I already know the answer, but... does it support burst mode?

dez3
3rd August 2015, 21:48
Hello,

no-one interested in this sale?

Regards
Stefano

can I add 16MB of memory to adapter with ic?

velourfog
4th August 2015, 07:36
Interested in one of the nice ones with IC.

vibros
4th August 2015, 17:41
Interested in one of the nice ones with IC.

Hello,

thanks and already replied on PM.

Regards
Stefano

- - - Updated - - -


Pretty sure I already know the answer, but... does it support burst mode?

Hello,

i don't know, but with the program for the A3000 'SetRamsey' ( not the one for the A4000 ), you can play with the access speed of the memory, and, with a good simm (60ns or 50ns model) and with a 10ns logic IC (i sell this device with a 15ns logic IC) you can improve the performance of the fast ram (but very few, about 1-2% as SysInfo report).

Regards
Stefano

- - - Updated - - -



Hello,

no-one interested in this sale?

Regards
Stefano

can I add 16MB of memory to adapter with ic?

Hello,

yes, with logic IC you can have 16mb, without no more of 4-8mb (but i need to verify this thing).

Regards
Stefano

velourfog
4th August 2015, 18:27
Payment sent!

dez3
4th August 2015, 21:54
interested

vibros
6th August 2015, 10:46
Payment sent!

Hello,

item sent today; more on PM.

- - - Updated - - -


interested

Hello replied on PM

Regards
Stefano

- - - Updated - - -

Hello,

to all interested on this device, please, read carefully:

to install this device, you need to detach the motherboard from the metal case and detach the daughterboard from it. Then, put a light between the zip sockets and the power connector of the motherboard;
take a look at the empty sockets, they need to be in good condition, otherwise with a little flat screwdriver try to make the things better.
Put the device on the sockets (see the pictures on this thread) and carefully press it down. If you encounter resistence, detach it , look at the pins, adjust what need to be adjusted and reput it on the sockets.
Shake it to right and to left, carefully, to feel the right position, then press it: it need to stay about 1-2mm over the sockets. With the help of the light, take a look that no pins are bend.
This device is handmade, but print it with a machinery give a result slight better. The worst part of this work is to solder the pins. On my device the pins are flat and not round, and this thing give a better (for my opinion) contact between the parts.
On the market, i have not found flat pins, and i have made it manually from new parts. they are like nails to avoid to tear the tracks when you detach the adapter from the motherboard.
Last thing, to detach this device, use a flat screwdriver and act around the border.

Regards
Stefano

velourfog
6th August 2015, 14:41
Thanks for the instructions, but why remove motherboard from case? Is that necessary? :)

vibros
7th August 2015, 10:05
Thanks for the instructions, but why remove motherboard from case? Is that necessary? :)

Hello,

it is better, but not necessary.
Your device was tested one day on my A3000D and all the pins are ok. In theory, you can put it on the empty sockets, try to feel if all is ok (to press carefully), then insert it down.
If the sockets are ok and this device is right centered, no problem if you do not wish to leave out the motherboard from the case.

Please, write to me when you try to install it on your Amiga.

Regards
Stefano

dez3
7th August 2015, 11:15
payment sent from another paypal acount

vibros
7th August 2015, 19:16
payment sent from another paypal acount

Hello,

payment received, the item will be shipped on monday.

The two complete items are sold; there is for sale the item without logic. I will test it soon, and i will report the result here on amibay.

Regards
Stefano

vibros
8th August 2015, 13:53
Hello,

the last item is now on my A3000D motherboard. With a 32 mb simm it give 8 mb; i think, with 8/4mb simm it give respectively 8 and 4 mb.
It is for sale for 30 Eur + postage. Payment by Paypal or bank account.

Regards
Stefano

vibros
10th August 2015, 12:52
Hello,

dez3, item sent today. More infos on PM.

regards
Stefano

velourfog
19th August 2015, 21:38
Sorry for late feedback, but after some headscratching how to install it it seems to work just fine :)

For some reason I get "only" 15MB reported, but I believe one of my ZIP banks may be faulty. Prior to the installing this adapter, I got 7.5MB total reported by Sysinfo even though 8MB ZIPs were installed.

92928

Thanks vibros, leaving positive feedback in a bit.

vibros
20th August 2015, 10:02
Hello,

many thanks, i will leave feedback in a short time.
About the issue, i do not ever seen this type of failure. The only clue is to take a look at the empty zip sockets, to see if all is ok.
You need to detach carefully this device (act around the border with a flat screwdriver, this action is safe!).

Best regards
Stefano

voyager_1701e
8th December 2015, 10:29
Hi Stefano,
Great board! Im about to get a 3000...id love to get one of your boards...have you any available at the moment? Even unassembled would be fine

thanks

vibros
10th December 2015, 14:46
Hello,

i am a little bit busy, but can you print this board industrially in your area? If yes, i have made slight improvement on the design of the pcb, to made easy print it with machinery and solder the parts easily. I will release the new draws here on amibay soon, please stay tuned.
I need to check what is the best option.

Regards
Stefano

voyager_1701e
17th December 2015, 12:41
There are some online places I can get them made (the boards). I think it requires a "gerber" file for the board design? Is that what you are considering releasing?

thanks

vibros
18th December 2015, 00:09
Hello,

yes, the gerber files i mean, but at the moment i have here the board without logic, that i have forgotten to mention on the posts above.
It is in working order and, actually, on my A3000D.
Read the post at the site five, please.
This board work with 4-8 and 32 mb simm (but it give only 8 mb, or 4 mb with the 4 mb memory simm).
If you add the logic IC, you can reach 16 mb with a 16 mb memory simm.

It cost 35 Eur with tracking inside Eu. If voyager_1701 (http://www.amibay.com/member.php?9792-voyager_1701e)e is interested on this item, it cost 40 Eur with tracking service.

Regards
Stefano

maw2k
18th December 2015, 04:08
Stefano, you wont do any other?

vibros
18th December 2015, 22:44
Stefano, you wont do any other?

Hello,

at the moment no. I will release soon the gerber files: this will be an improved version of this board on sale here, to make easy to solder common pins. It will be a two layers board, with the same size/dimension.

Regards
Stefano

vibros
22nd December 2015, 15:50
Hello,

the board pictured on the post #69 is no more for sale: the PCB was to bad! So i have opted to build a new part, and i sell it at (almost) the same conditions

without logic, that can be added later, at 30 Eur + postage (10 Eur inside Europe or 15 Eur for the rest of the world).
The quality of this PCB is very good!

Happy holiday to all!

genny_flick
26th December 2015, 14:20
Very good, I want one if is possible.

vibros
26th December 2015, 23:08
Very good, I want one if is possible.

Hello,

this part is actually on my A3000D motherboard: it work without problem and can be yours!
Please, PM to me if you are interested.

Regards
Stefano

Marco06
27th December 2015, 16:52
A very good product, work very well on board SIMM 16Mb 60ns. :cool:

vibros
27th December 2015, 17:59
A very good product, work very well on board SIMM 16Mb 60ns. :cool:

Hello,


many thanks for your purchase of this device some time ago!


I will release soon the Gerber files of an improved version of this part (two layer board), just wait a reply from moderators on other thread; but this device, printed by me at home, still will have some good points!
One are the pins, that are flat and well suited to connect to the original sockets of the motherboard. I think, the new two-layer board will receive common rounded pins, that are not so good in this case...

Regards
Stefano

vibros
28th December 2015, 23:17
Very good, I want one if is possible.

Hello,

payment received from genny_flick; the item will be shipped ASAP.

No more items for sale, at the moment.

Regards
Stefano

vibros
31st December 2015, 15:12
Hello,

item sent today to genny_flick. More on PM.

Regards
Stefano

genny_flick
31st December 2015, 18:52
Thanks!

genny_flick
8th January 2016, 17:39
http://images.tapatalk-cdn.com/16/01/08/d0fc2cd4faa1ac8e30458659a1af953e.jpg

http://images.tapatalk-cdn.com/16/01/08/76d99d104d1eb81d5bd8f63b411bd7af.jpg

Item received and tested! GAL programmed myself ;)
Feedback will be left soon!

Inviato dal mio GT-N7100 utilizzando Tapatalk

vibros
8th January 2016, 22:54
Hello Rino,

many thanks! ...and feedback already left!

Regards
Stefano

vibros
10th January 2016, 23:11
Hello,

if requested, i can build another unit.

Regards
Stefano

maw2k
11th January 2016, 01:41
if requested, i can build another unit.

yes please. 1 for me.

vibros
22nd January 2016, 21:23
Hello,

it is under construction...

Regards
Stefano

Astral
23rd January 2016, 00:03
I'm interested. Can you build/supply
another one? I'll send you a PM

maw2k
25th January 2016, 02:59
Hello,

it is under construction...

Regards
Stefano
Great thx. With the logic please.

Sent from my Nexus 5X using Tapatalk

vibros
1st February 2016, 23:53
Hello,

maw2k, if you are still interested your part is ready to be sent. It is already tested for about two days, just to give the right position to the flat pins.
The cost is 40 Eur + 11 Eur of postage to your country.
Another unit is already tested and ready, but without logic, at the cost of 30 Eur + postage. If Astral is still interested, this part is for you: if you can burn a GAL in your area, well, otherwise i can obtain one part and sent it later, at the cost of postage (about 2 Eur), but it take time. The adapter can be sent now, and will see max 8Mb.

Regards
Stefano

Pictured is the part for maw2k, follow soon the pictures of the other part!

esc
2nd February 2016, 06:19
Hi Vibros,

I am interested in one with full logic if/when it becomes available. Thanks!

maw2k
3rd February 2016, 02:05
Stefano, I will have to withdraw since I finally buried now the idea to get an A3000. I'm sure esc will be happy to have it. Sorry again.

Astral
3rd February 2016, 10:07
Stefano, I will have to withdraw since I finally buried now the idea to get an A3000. I'm sure esc will be happy to have it. Sorry again.

Or Astral? Yes me thinks so :)

esc
3rd February 2016, 12:38
Also I am going to withdraw interest for now but may be interested in the future! THanks :)

vibros
5th February 2016, 00:32
Hello,

the part in picture that was for maw2k, come to Astral at the same price 40 Eur + 11 Eur postage + Paypal fee (or sent as gift).

Regards
Stefano

- - - Updated - - -

Hello,

here the second item, without logic, at 30 Eur + postage (the logic can be added later).

Regards
Stefano

daloway
5th February 2016, 19:09
Interested


Wysłane z iPhone za pomocą Tapatalk

vibros
5th February 2016, 19:31
Hello,

replied on PM.

Regards
Stefano

vibros
11th February 2016, 14:55
Hello,

the two parts are still here for sale...

Regards
Stefano

highpuff
11th February 2016, 15:16
Interested :)

vibros
12th February 2016, 17:35
Hello,

replied on PM to highpuff.

I wish to add two words about this device.
I hope soon i will release the draw of a two layer version of this PCB, but it will take time, because the layout of the tracks need to be newly draw: the pins used by this new design will be aligned in rows and not alone and sparse like you see on this device for sale, otherwise will be impossible to solder the pins towards vertical and then will be hard to put this adapter in place.
What you see on this sale, has sparse pins, because to obtain this design in a single side board, just a choose of sparse pins allow to obtain the final result that you see in this pictures.
The flat pins, that are flexible, allow a very good handling to insert it in place, but this pins are not on the market, they are made by me from other parts.
If i release the new draw, every person can build his own unit, and need to find all the parts needed to build it, in other words, you will find rows of pins (round or square of section), and only in rows you can solder this pins correctly!

What is here for sale, is made manually, tested for a couple of days, and then packed. The parts are not all the same and can be that some PCB are printed not so good (the tracks can be not so precious, but they are not visible, when the device is mounted), but, if it is here, the device is reliable and protected against oxidation.

The difference of the cost is just the cost of the programmable device and the time spent to program it: you do not pay for the content, that is freely downloadable here on Amibay!

The cost of this device is 40 Eur, with the logic, less without the logic: in this case, 30 Eur.

Regards
Stefano

highpuff
14th February 2016, 17:57
Sadly I have to withdraw :(


Interested :)

Marco06
14th February 2016, 22:20
Hello Vibros, just a little question: your adapter work in A3000T version ?
Because today i have FINALLY repaired my old A3000T (many many hours for search failure) and i want installer your hardware with 16Mb fast ram.

vibros
14th February 2016, 22:25
Hello,

no, it does not fit into an A3000T motherboard, because the distance of the two blocks of sockets is diferrent from the A3000D motherboard.
A version for the A3000T is not planned...

Regards
Stefano

Marco06
14th February 2016, 22:38
Thanks Stefano. :)

comraider
24th February 2016, 00:49
declaring interest, PM sent

vibros
24th February 2016, 21:38
Hello,

replied to comraider.

Regards
Stefano

comraider
26th February 2016, 07:29
interest withdrawn, next in line is now welcome :)

vibros
26th February 2016, 10:34
Hello,

the last two parts pictured in the last posts, are still for sale.

Regards
Stefano

vibros
11th March 2016, 12:48
Hello,

still for sale the last two items, that are already tested and used for days on my A3000D motherboard.

Regards
Stefano

vibros
27th March 2016, 21:42
Hello,

still for sale.

Regards
Stefano

eStorm
29th March 2016, 05:55
declaring interest for one piece including the logic - pending p&p to germany

AZ491
29th March 2016, 07:16
Interesting in one with logic.

vibros
30th March 2016, 18:21
declaring interest for one piece including the logic - pending p&p to germany

Hello,

replied on PM.

Regards
Stefano

- - - Updated - - -


Interesting in one with logic.

Hello,

will wait the replies from the first in line (eStorm), because the device for sale are two, but only one with the logic.

Regards
Stefano

SuBz
6th April 2016, 10:29
I am interested in one with logic.

vibros
6th April 2016, 13:43
Hello,

it is still for sale, please PM to me...and read carefully all my posts here.

Regards
Stefano

vibros
22nd April 2016, 19:16
Hello,

the two last items are still for sale.
I was thinking that Amibay was the right place to sell this parts...

AXm77
22nd April 2016, 19:28
Interested in one (16MB). Can you PM me shipping cost to US?

vibros
24th April 2016, 23:35
Hello,

replied today to AXm77.

Sorry for this delay, but i am not daily online.

Regards
Stefano

vibros
9th May 2016, 21:02
Hello,

the two parts are still here for sale.

Regards
Stefano

daloway
10th May 2016, 08:58
Interested in 1 with logic

vibros
15th May 2016, 15:35
Hello,

replied today to daloway.

Regards
Stefano

vibros
29th May 2016, 12:06
Hello,

the two parts are here, for sale at a new price.

The signs printed are not so precious, sorry for that, bu the parts are 100%ok and are tested. When mounted, they look good.

The cost of the postage (with tracking service) will be 9 eur to EU or about 11 Eur overseas.

Regards
Stefano

vibros
12th June 2016, 11:48
up!

vibros
15th June 2016, 14:55
Hello,


i am happy to know if there is something odd in this device, that make this sale so unhappy! Seem that this device is completely ignored despite is very usefull function.
...price drop and i hope to sell it quicly, to go forward...


Regards
Stefano

vibros
28th June 2016, 23:52
Up!

vibros
29th June 2016, 20:57
Hello,

price drop on the first post.

Regards
Stefano

fralbore
29th June 2016, 21:02
Interested in one with logic. Pm sent.

vibros
29th June 2016, 21:17
Hello,

replied on PM.

Regards
Stefano

Pghulme
29th June 2016, 21:24
Also interested in one with logic

cyberstormer
29th June 2016, 22:04
Interested in One with Logic !

vibros
30th June 2016, 17:06
Hello,

the one with logic is almost sold to fralbore.
There is the one without logic (that mean max 8mb) but the logic can be added later.
The content is here on Amibay.

Regards
Stefano

fralbore
30th June 2016, 18:14
Payment for one with logic sent.

Pghulme
30th June 2016, 18:31
Hello,

the one with logic is almost sold to fralbore.
There is the one without logic (that mean max 8mb) but the logic can be added later.
The content is here on Amibay.

Regards
Stefano

interestec in that then

vibros
1st July 2016, 14:26
Hello,

payment received from fralbore. The item will be sent ASAP (next week).

- - - Updated - - -




interestec in that then

Hello,

PM sent.

Regards
Stefano

vibros
2nd July 2016, 08:38
Hello,

payment received from Pghulme. The item will be sent ASAP.

Regards
Stefano

vibros
5th July 2016, 12:58
Hello,


item already sent to fralbore, more on PM.


Regards
Stefano

Pgovotsos
5th July 2016, 18:13
Interested in at least 2 with the logic. Sending PM with questions later.

vibros
5th July 2016, 20:47
Hello,

this parts are hand made and at the moment there is no more parts available.

Regards
Stefano

Pgovotsos
5th July 2016, 22:31
Hello,

this parts are hand made and at the moment there is no more parts available.

Regards
Stefano

No problem. Do you plan on making more in the future?

vibros
7th July 2016, 08:24
No problem. Do you plan on making more in the future?


Hello,

no idea, can be that a new version to print with machinery will be released here.

Regards
Stefano

vibros
26th July 2016, 22:20
Hello,

to the last buyers: a picture of the device installed is more then wellcome.

joethezombie
27th July 2016, 18:52
If you do make more, I am also interested in two units with the logic.

fralbore
28th July 2016, 16:58
Hi vibros, sorry but I has no time to mount it. PM sent.

joachimrs
9th August 2016, 18:12
Declare interest in four 16MB units with logic, when available again. Very interested in help with 3000/ 3000T motherboard repair.

vibros
10th August 2016, 12:14
Declare interest in four 16MB units with logic, when available again. Very interested in help with 3000/ 3000T motherboard repair.

Hello,

at the moment there is no more item for sale.
A better explanation on PM.

Regards
Stefano

joachimrs
12th August 2016, 18:27
Declare interest in four 16MB units with logic, when available again. Very interested in help with 3000/ 3000T motherboard repair.

Hello,

at the moment there is no more item for sale.
A better explanation on PM.

Regards
Stefano

Hello there,
would love to hear from you. I am also interested in help regarding Amiga 3000 hardware (motherboard) restauration, if you are still available for this kind of work.
Thanks and best regards
Joachim

daloway
24th September 2016, 14:55
withdrawn

vibros
9th June 2017, 18:21
Hello,


i am going to build new parts of this adapter, but i have mistakely bought simm sockets strongly angled (45*), that need more space into the original A3000 desktop to accept memory simm.
Can someone tell me the amount of space (in inches or millimeters) between the zip sockets and the metal plate above?
Then, there is someone interested on this adapter, that has the A3000 motherboard into a Tower and then not touched by this problem?


Thanks in advance.


Regards
Stefano

A10001986
9th June 2017, 18:38
Sorry, I am away from my A3000s at the moment, but I'd like to declare interest in 2 pcs with logic if they fit into the 3000D, that is ;). Edit: ... while still allowing to use a 3640.

/Thomas

Pgovotsos
9th June 2017, 19:46
I can measure it tomorrow for you. If they will fit, I'd still be interested as before. I think it was for 2 with logic for 16 MB.

Surfer
9th June 2017, 21:57
Interested (adapter with logic) for 3000D


Inviato dal mio iPad utilizzando Tapatalk

Pgovotsos
10th June 2017, 05:04
Then, there is someone interested on this adapter, that has the A3000 motherboard into a Tower and then not touched by this problem?

Are you meaning an A3000D motherboard put into a tower case or an actual A3000T motherboard? If you mean an A3000T motherboard it won't fit because the ZIP sockets aren't the same distance apart as they are on an A3000D motherboard. I was desperate once and bent the pins and it will _just_ fit the A3000T sockets but it's unreliable as heck because the pins on one side are barely making contact in the sockets and there's no reasonable way to secure the adapter in place. The pins also are about as (not) sturdy as the ones on actual ZIP chips so there's real risk of breaking them.

How long is the "tail" on the adapter? I mean how long is the adapter beyond the last pin?

dalek
11th June 2017, 05:25
Interest in 1x with logic if you end up making these :)

Sent from my FIND7 using Tapatalk

vibros
12th June 2017, 22:54
Then, there is someone interested on this adapter, that has the A3000 motherboard into a Tower and then not touched by this problem?

Are you meaning an A3000D motherboard put into a tower case or an actual A3000T motherboard? If you mean an A3000T motherboard it won't fit because the ZIP sockets aren't the same distance apart as they are on an A3000D motherboard. I was desperate once and bent the pins and it will _just_ fit the A3000T sockets but it's unreliable as heck because the pins on one side are barely making contact in the sockets and there's no reasonable way to secure the adapter in place. The pins also are about as (not) sturdy as the ones on actual ZIP chips so there's real risk of breaking them.

How long is the "tail" on the adapter? I mean how long is the adapter beyond the last pin?

Hello,

i mean an A3000D moterboard into a PC tower case adapted. A3000T motherboard has a slight different design about the zip sockets and my adapter do not fit correctly, and my adapter has a form that is senseless for the A3000T.

Regards
Stefano

vibros
8th July 2017, 02:46
Hello,

there is for sale two new adapters, with logic, at 40 Eur/piece (without memory simm) + postage. Take a look at the pictures: i can't guarantee that this adapter, equipped with a common simm, fit on a A3000D motherboard in an original case, because the simm socket's degree is about 45. Can be that diffrent type of simm take different room inside the desktop case.
If you are interested, please, read all the post of this thread, to know exactly how it fit onto the motherboard and how it work.

About old sale, can be that someone of you has received this adapter without logic and the buyer has failed to make this device working. Can be that i have make erroneous assumption about this configuration and your adapter need the logic to work properly. If that, please contact me!

And last, i wish to remember that, if you are interested, you not pay for the content of the logic, that is freely downloadable here on Amibay, but you pay for my work, to realize this device with his own design: the most common CPU card for the A3000 fit correctly with this adapter, even the A3640.

Regards
Stefano

vibros
27th July 2017, 17:18
Hello,

still for sale!

Regards
Stefano

Simon
15th August 2017, 21:52
Will it fit in my A3000T ?

vibros
19th August 2017, 04:52
Will it fit in my A3000T ?

Hello,

no, it does not fit, because A3000T has slight different measures about the position of the two blocks of ZIP sockets.

Stefano

Simon
22nd August 2017, 09:46
That's a pitty

vibros
5th September 2017, 07:11
Hello,

with this device, fast memory simm (50-60 ns) and the tool SetRamsey it is possible to have a plain A3000D 1-2% faster as reported by SysSpeed.
I need to test this thing and i will report the result here.

Stefano

Pghulme
5th September 2017, 07:13
Interested if one with logic available

vibros
5th September 2017, 07:43
Hello,

yes, two available complete with logic, but the price is 40 Eur each! Built with new parts and looking very well (they are hand-made, with common defects that do not affect the functionality and the durability).

Thanks for your reply!

Stefano

vibros
13th October 2017, 15:43
Up!

Marco06
22nd October 2017, 16:32
Hi Stefano, if one is available i am interested (adapter and logic), for a new A3000D in my house.
Send me exatly price to delivery in France, payment by Paypal if you agree.
regards,

Marco

vibros
25th October 2017, 14:20
Hello,

yes one is available for you. Replied on PM.

Regards
Stefano

Marco06
25th October 2017, 21:40
Payment sent, Stefano. :cool:

Bunta714
26th October 2017, 03:20
Hello. I'm interested in one of the adapters with logic if they are still available. I will send a PM.

vibros
26th October 2017, 14:34
Hello,

Bunta714, the second one on sale is still available.

Best regards
Stefano

Bunta714
26th October 2017, 15:14
Great! PM sent!

Fook42
26th October 2017, 23:34
hi.. i hope, i'm not too late.. but i'm interested in one 16mb-adapter too... are there any left?
regards

vibros
29th October 2017, 15:34
Hello,

two items sold to 'Bunta714' and 'Marco06'. Please 'Fook42' i will made two new units in two weeks.

Regards
Stefano

Bunta714
30th October 2017, 05:07
Payment and shipping information sent!

vibros
31st October 2017, 17:44
Payment and shipping information sent!

Hello,

many thanks!,The item will be sent ASAP.

@Marco06, item sent yesterday.

Regards
Stefano

Marco06
4th November 2017, 11:52
Delivered this morning, perfect !

Feedback on the way !

vibros
7th November 2017, 13:25
Hello,

'Bunta714' item sent yesterday, more infos on PM.
Marco06, very well! A picture of this device installed on a working system is more then welcome!

Regards

vibros
15th November 2017, 10:43
Hello,


a new part, quickly assembled and positively tested, is for sale. Fook42 is first in line (PM already sent).
As said, this part is hand-made and it is not free from imperfections! But functionality and durability are guaranteed! You can detach it from sockets many times without be feared to tear of the copper tracks.


Regards
Stefano

Fook42
15th November 2017, 17:00
Fook42 is first in line (PM already sent).


sorry.. i just bought new ZIP-Rams from china ..

have to withdraw.

screemo
26th November 2017, 12:14
I would like to buy one. Any more left?

Sendt fra min SM-G955F med Tapatalk

screemo
26th November 2017, 12:16
I would like to buy one. Any more left?

Sendt fra min SM-G955F med Tapatalk(The one with the logic for 16mb)

Sendt fra min SM-G955F med Tapatalk

vibros
2nd December 2017, 18:50
I would like to buy one. Any more left?

Sendt fra min SM-G955F med Tapatalk(The one with the logic for 16mb)

Sendt fra min SM-G955F med Tapatalk

Hello,

the item pictured above is for sale. If you are still interested, please PM to me.

Regards
Stefano

screemo
2nd December 2017, 18:58
Pm sent.

Sendt fra min SM-G955F med Tapatalk

vibros
7th December 2017, 07:14
Hello,

payment received from screemo, the adapter will be sent ASAP.

Regards
Stefano

Bunta714
9th December 2017, 15:35
Board received and it works perfectly.

Took a couple tries to get all of the pins lined up at first, but now it's running great. Thanks!
Feedback incoming.

vibros
10th December 2017, 19:24
Hello,

very well! If right inserted it will never give contact problem. The part on my A3000D is one of the first that i have made and i leave it out from my A3000D every time i need to test a new adapter: until today, it work perfectly without contact problem!

Stefano

vibros
14th December 2017, 10:56
Hello,


item already sent, more infos on PM.


Stefano

vibros
15th December 2017, 16:41
Hello,

there is another one unit for sale, with logic, at 40 Eur + postage. I will post pictures of this new part in a short time.

Stefano

vibros
29th December 2017, 17:15
Still for sale...

Stefano

vibros
18th January 2018, 08:50
Up!

vibros
11th February 2018, 17:26
One item for sale.

Regards
Stefano

vibros
9th March 2018, 10:14
Hello,

one or two items are for sale.

Regards
Stefano

vibros
27th March 2018, 16:32
Up!

vibros
20th April 2018, 11:57
Hello,

i have for sale two Zip2Simm adapters for the Amiga 3000D. They are something like an SE (Special Edition :-o ) version: the look is very modern, because the PCB is very sheer!

I ask 40 Eur each plus postage (11 Eur tracked world wide).

The adapter is complete, with PLD but without memory Simm.

Regards
Stefano

Skilgannon
30th April 2018, 07:56
Hi Stefano - do you still have any adapters for sale please? I'm interested in getting one.

vibros
5th May 2018, 16:21
Hello,

yes, exactly what is pictured on the post above is for sale!
Sorry for this late reply: if still interested, please PM to me!

Stefano

KONEY
11th May 2018, 22:01
Declaring interest

First I'd need to know if it allows 68030 burst mode to be enabled. Assuming correct RAM are used, of course!

Thanks

vibros
12th May 2018, 16:20
Declaring interest

First I'd need to know if it allows 68030 burst mode to be enabled. Assuming correct RAM are used, of course!

Thanks

Hello,

thanks for your reply! Do you mean like with the fastest Zip module? If so i think no, a memory simm module can't this thing. But you can change some timing about refresh, with a tool on Aminet (please, about the name of this tool, read the posts above): to obtain a faster access memory to the memory you need simm at least labelled 50 ns (printed on the surface '-5' or '-50').

Regards
Stefano

KONEY
14th May 2018, 02:35
thanks for your reply! Do you mean like with the fastest Zip module? If so i think no, a memory simm module can't this thing.
Stefano

Yes exactly like that! Thanks for the information.

vibros
30th May 2018, 12:31
Hello,

the last two items are still for sale.

Stefano

oguzog
21st June 2018, 21:35
Declaring interest. PM Sent.

vibros
24th June 2018, 19:28
Hello,

replied on PM to 'oguzog'.

Regards
Stefano

vibros
12th August 2018, 11:12
Hello,

the parts are still here...

Regards
Stefano

vibros
31st August 2018, 18:06
Hello,

two of this are for sale, at the same price...
138922

Regards.

vibros
3rd September 2018, 04:31
Hello,

new price: 45 Eur with postage worldwide included (with tracking).

Regards
Stefano

vibros
17th September 2018, 09:47
Hello,

if no one is interested, it will be listed elsewhere, but it is sad because this part look very well!

Cheers
Stefano

Anubis
29th September 2018, 06:43
Hi,
Is it still available?

FeRu
30th September 2018, 13:34
Declaring Interest if it still available. PM Sent

vibros
30th September 2018, 19:36
Hello,

to both, the two parts with a semi-transparent look are still here!
Sent a PM...

Regards
Stefano

vibros
14th October 2018, 18:14
Hello,

the two adapters are still here and unsold until today!

Cheers
Stefano

vibros
25th October 2018, 17:54
Hello,

one adapter of this last two is reserved to FeRu.

Thanks and cheers

FeRu
25th October 2018, 18:50
Hello,

one adapter of this last two is reserved to FeRu.

Thanks and cheers

Payment sent ;)

vibros
30th October 2018, 14:06
Hello,

many thanks FeRu, payment received! The adapter will be sent ASAP!

Still one of the last production (transparent look!) is for sale!

Regards
Stefano

vibros
31st October 2018, 18:01
Hello,

item of FeRu is on the way.

Cheers

FeRu
10th November 2018, 01:32
Hello,

item of FeRu is on the way.

Cheers

Item recived in Wendesday. Everything works as it should.
I'm very happy with adapter,It's nice and compact and only for one simm module.
Big thanks and positive feedbach left :)

vibros
10th November 2018, 17:07
Hello,

seems that something was broken, so wait explanation from FeRu.

FeRu
10th November 2018, 19:52
I didn't wrote that is broken, I had only issues with some pins little bend,probably when you make package and put them into polystirene,few of them was of center,and I need straight them.
Maybe this was my fault when I unpack adapter,but I unpack this piece with caution like many other retro stuff/chips with very thin pins. Anyway I'm not angry or disappointed
I was able install adapter and it works ok,and I'm happy with it

vibros
11th November 2018, 16:51
Hello,

ok this is a picture of the adapter sent.

vibros
12th November 2018, 15:53
Hello,

come on guys, one item is for sale...!

Cheers
Stefano

FeRu
17th November 2018, 17:40
Declared interest in last piece for my friend.

vibros
19th November 2018, 18:48
Hello,

FeRu, can you please post a picture of the working device into your A3000D, that i have sent to you?

Thanks in advance

Regards
Stefano

FeRu
19th November 2018, 19:24
I sent you on PM, but ok here it is :

https://thumb.ibb.co/m48skL/6.jpg (https://ibb.co/m48skL)

vibros
19th November 2018, 19:30
Hello,

i am happy to see the device right mounted on the motherboard. Not only for me, just because it look good.

Regards
Stefano

FeRu
20th November 2018, 13:51
Payment sent for last adapter

vibros
20th November 2018, 21:03
Payment sent for last adapter

Hello,

wait to pay, please, and show me (and to the Amibay comunity) the working device inside your A3000D. I am proud about this last version and i wish, first of all, to see it right mounted. Understand this please!

Regards
Stefano

FeRu
24th November 2018, 21:17
So do you thing I'm liar, or what? I sen you photo before with proof that 16MB is working with adapter.I told you that I had some issues but everything is ok.
Below are photos with working adapter.
This is why you refund payment forl last adapter for my friend?

https://i.ibb.co/R4RbC5N/ziptosimma3k.jpg (https://ibb.co/R4RbC5N) https://i.ibb.co/D4b2yT5/zipsimadaptera3k2.jpg (https://ibb.co/D4b2yT5)https://i.ibb.co/yfbfhXf/adaptera3k.jpg (https://ibb.co/yfbfhXf)

vibros
27th November 2018, 15:32
Hello FeRu,

ok, thanks for the pictures, you got the second adapter!

Regards
Stefano

FeRu
30th November 2018, 01:58
Payment sent again...Waiting for shipping/tracking info

vibros
9th December 2018, 16:51
Payment sent again...Waiting for shipping/tracking info


Hello,

item sent three days ago, more on PM.

There is for sale a new part, but not as this on the last sale, with transparent look; I ask 40 Eur, postage to world-wide with tracking is also included, or, if you own a programmer for GAL, i send this item without PLD at 35 Eur instead.

To build new parts with transparent look is not a problem but i need to know where to buy simm sockets like the one found on the A4000D motherboard (angled in the same way).

Thanks in advance

Cheers
Stefano

jope
9th December 2018, 19:52
There is for sale a new part, but not as this on the last sale, with transparent look; I ask 40 Eur, postage to world-wide with tracking is also included, or, if you own a programmer for GAL, i send this item without PLD at 35 Eur instead.

I'm interested, with GAL included please.

vibros
20th December 2018, 12:54
Hello,

thanks for your interest! Actually i am short on PLD GAL's and on SIMM sockets, to build new parts, so, please, i will update this thread soon as i have the parts to complete your request!
But, at the moment, one device without PLD is ready to be sold at 35 eur with postage included!

Cheers and best holidays to all the Amibayers around the world!

jope
20th December 2018, 19:33
Hi,

Thanks for the update. Please send me a PM once you have one available, I might miss the thread.

vibros
16th January 2019, 07:50
Hello,

the part for sale is still here: it look good but it has a less angled simm socket and no GAL on it ...so it is for programmer...if you are so, buy it!

Cheers
Stefano

vibros
17th February 2019, 14:50
Hello,

i have added the logic chip, so i sell this part as complete, without simm module. The price will be 45 Eur with postage tracked worldwide!
Actually this piece of hardware is on my Amiga 3000D.

143901143902

Please confirm your interest if you was looking for a complete part.


Cheers
stefano

vibros
18th February 2019, 14:27
Hello,

new price for the part on the previous post: 40 eur with postage Worldwide!

Regards
Stefano

jope
22nd February 2019, 08:29
Hi, interest confirmed.

vibros
22nd February 2019, 10:48
Hello,

many thanks! Replied today on PM!

Regards
Stefano

Niezgodka
24th February 2019, 17:50
Interested in One!

vibros
25th February 2019, 09:31
Interested in One!

Hello,

i will try my best to arrange a new part (with no transparent look anyway!).

To all,

to mount correctly this device it is needed to align the two pins most near the cpu socket, then to align all the adapter to the socket area, then carefully press the part; if you encounter resistences, stop and try newly.
I am sorry about inconveniences! But still i believe in this adapter, that it is affordable and you can detach many times with the help of a thin flat bar.
Keep in mind that a socket for the fast ram is one of the most delicate part of a computer!

Regards
Stefano

vibros
26th February 2019, 10:42
Hello,

payment received from jope! Thanks! The item will be sent ASAP.

Cheers
Stefano

vibros
9th May 2019, 10:31
Hello,

a new adapter is now for sale, complete with logic, to be used with 4-8 or 16mb simm (but 32mb are ok, just only 16mb will be used by the system).
About who has declared interest, someone help me on what to do, on who is the first in line, if still interested.

I have to ask for a new price: 40 Eur + postage.

Cheers
Stefano

By the way i don't know if it is allowed floating prices...like in true economy!

Solaris
10th May 2019, 16:57
Hi,
interest declare.

vibros
16th May 2019, 22:03
Hello Solaris,

still interested?

Regards
Stefano

vibros
20th May 2019, 13:53
Hello,

price + postage (with tracking) inside Eu countries will be 47 Eur.
The adapter looks very good and actually is in my A3000D with 16 mb ram.

Cheers
Stefano

Edit: postage is expensive,about 11 eur!

Styrbjorn
28th May 2019, 00:36
Hello !

Do you have an adapter for sale ? Im very interested !

Does the adapter require some modifications to the motherboard ?

Regards.


Hello,

a new adapter is now for sale, complete with logic, to be used with 4-8 or 16mb simm (but 32mb are ok, just only 16mb will be used by the system).
About who has declared interest, someone help me on what to do, on who is the first in line, if still interested.

I have to ask for a new price: 40 Eur + postage.

Cheers
Stefano

By the way i don't know if it is allowed floating prices...like in true economy!

vibros
1st June 2019, 09:16
Hello !

Do you have an adapter for sale ? Im very interested !

Does the adapter require some modifications to the motherboard ?

Regards.



Hello,

replied on PM and no, it needs no modification, but it is only for A3000D motherboards, because A3000T has slight different spacings on ZIP sockets.
It needs only to be very carefull on montage, because i have used flat pins, like original pins on ZIP parts, but they are flexible and, on my device, they are placed randomly, so, pay attention to avoid to flex it!

Best regards
Stefano

Styrbjorn
1st June 2019, 14:47
Great i'l take one :)

I've sent you payment through PayPal and pm'ed you my address.



Hello !

Do you have an adapter for sale ? Im very interested !

Does the adapter require some modifications to the motherboard ?

Regards.



Hello,

replied on PM and no, it needs no modification, but it is only for A3000D motherboards, because A3000T has slight different spacings on ZIP sockets.
It needs only to be very carefull on montage, because i have used flat pins, like original pins on ZIP parts, but they are flexible and, on my device, they are placed randomly, so, pay attention to avoid to flex it!

Best regards
Stefano

vibros
3rd June 2019, 13:11
Hello,

Styrbjorn, the adapter will be sent ASAP!.

Cheers
Stefano

Microfinne
3rd June 2019, 17:15
Hi Vibros, declare interest in one piece: 40 Eur with the logic (4/8/16 mb). PM.

vibros
5th June 2019, 11:45
Hi Vibros, declare interest in one piece: 40 Eur with the logic (4/8/16 mb). PM.

Hello,

actually all the adapters are gone! I will do my best do made a new one!

Regards
Stefano

vibros
14th June 2019, 12:10
Hi Vibros, declare interest in one piece: 40 Eur with the logic (4/8/16 mb). PM.

Hello,

i have built a new one. It is ok, in working order, but it has cosmetics defects (little) that do not affect the functionality, that is guaranted. I state a price of 35 Eur for this adapter, plus 7 Eur postage with tracking inside Europe. Add another 3 Eur to post outside Europe.
As said, Microfinne is first in line, if still interested.

Regards
Stefano

vibros
18th June 2019, 11:10
Hello,

Microfinne is first in line: it has requested pictures that show defect. I will post here images of the adapter ASAP.

Cheers
Stefano

vibros
25th June 2019, 09:54
Hello,

here the pictures!

- - - Updated - - -

Hello,
just for info: some days ago i have received an old adapter from a user. It was damaged in a pin and a track. In general it looks good so the repair was done happily and now it is fully functional for about a dozen of Eur If someone else wishes to send to me a damaged one, i am happy to repair it.

Cheers

vibros
1st July 2019, 13:54
Hello,

the last adapter is sold to Microfinne!

The item will be sent ASAP.

Cheers
Stefano