Zetr0
Ya' Like it Retr0?
Hello my friends,
I am clearing out some old lot of stuffs so today - ready to go are 4 Sinclair Spectrum IDE kits
Each Kit includes
1x Z80 Universal IDE Adaptor Rev3.1E
2x W27E257 Winbond EEPROM (freely programmed for +3e)
1x 15CM IDE Cable
1x CF to IDE Adaptor
1x 128MB CF card (freely programmed and ready to go)
1x 4pin Power molex connector
1x 20 page installation and +3e DOS guide.
All that lot for £25 + postage
I only have four kits available so first come first served and postage will be this Friday.
Have a look at the installation and +3e DOS guide here
I have also created some guides on how to get the most out of the adaptor kit-
How to Create and Write Images
How to Add Files and Snapshots
How to Load Snapshots
Adding and Converting TAP files
For more support click here for and updates to the CF click here
So what can this adaptor kit do for you ?
If you have a BLACK Spectrum +2 (A or B)
Or
Spectrum +3
Then not only can you store games and applications on the card, but as well as reading you can write to the card like a big fat disk.
I write a lot of programs on the FUSE emulator and then I transfer them to the Card for booting on a Spectrum +2AB/+3 - if you are into Spectrum's and like a bit more than just gaming then this is the adaptor for you.
Here is an overview of the kit in action
[m]https://www.youtube.com/watch?v=O6pYJCwuuUA[/m]
This was set up for use with an event that Replay had been doing in Rotherham (hence the spash screens) - the CF card included does not have these
Here is an older overview of the DOS and homebrew capabilities of the adaptor
[m]https://www.youtube.com/watch?v=zQJAlyLaGvk[/m]
I hope that helps, remember I only have four left =)
I am clearing out some old lot of stuffs so today - ready to go are 4 Sinclair Spectrum IDE kits
Each Kit includes
1x Z80 Universal IDE Adaptor Rev3.1E
2x W27E257 Winbond EEPROM (freely programmed for +3e)
1x 15CM IDE Cable
1x CF to IDE Adaptor
1x 128MB CF card (freely programmed and ready to go)
1x 4pin Power molex connector
1x 20 page installation and +3e DOS guide.
All that lot for £25 + postage
I only have four kits available so first come first served and postage will be this Friday.
Have a look at the installation and +3e DOS guide here
I have also created some guides on how to get the most out of the adaptor kit-
How to Create and Write Images
How to Add Files and Snapshots
How to Load Snapshots
Adding and Converting TAP files
For more support click here for and updates to the CF click here
So what can this adaptor kit do for you ?
If you have a BLACK Spectrum +2 (A or B)
Or
Spectrum +3
Then not only can you store games and applications on the card, but as well as reading you can write to the card like a big fat disk.
I write a lot of programs on the FUSE emulator and then I transfer them to the Card for booting on a Spectrum +2AB/+3 - if you are into Spectrum's and like a bit more than just gaming then this is the adaptor for you.
Here is an overview of the kit in action
[m]https://www.youtube.com/watch?v=O6pYJCwuuUA[/m]
This was set up for use with an event that Replay had been doing in Rotherham (hence the spash screens) - the CF card included does not have these
Here is an older overview of the DOS and homebrew capabilities of the adaptor
[m]https://www.youtube.com/watch?v=zQJAlyLaGvk[/m]
I hope that helps, remember I only have four left =)
Last edited: