Project of GBA1000 expansions (PICASSO, Thylacine, 68060) - Batch 2

Status
Not open for further replies.

Tuxbar81

Active member
Rating - 100%
161   0   0
Joined
Nov 24, 2012
Posts
2,176
Country
France
Region
Midi-Pyrenees
Some members have asked for the PCBs of the Picasso graphic bard, of the Mini-Thylacine and of the 68060 accelerator board for their GBA1000.

The production of the PCBs has been done.
The PCBs has been sent the 03/26/2015 via DHL.
The PCBs are arrived and I have started to send them to interested members.

68060 accelerator PCB
Picasso graphic PCB
Mini-Thylacine
PCB

IMG_20150330_180854.jpgIMG_20150330_181136.jpgIMG_20150330_180729.jpg


Thanks for your attention!


Table under construction!

MembersThylacine68060PICASSOPCB priceTaxesTotal price
(without shipping cost)
PaidSentGD5434XC95144XLXC9572XLM514260E
-60J x8
K4S561632J
-UC60 x4
74ALVT16543
x4
SL811HSGAL16V8B
-25QP x2
Total
Components + PCBs
TaxesPaid86pins
connector
+
price
Package
Ready
+
weight +
Destination
deetsay2121.6341.5623.20YES04/08/2015
Rakeim1321115.541.0416.58YES04/07/2015
Tahoe1115.541.0416.581+12+220.020.41YESYES
156 g
The Netherlands
DutchinUSA11126.891.5628.45YES04/08/20150112042019.251.14YES1
5.60€
YES
94 g
Germany
Tuxbar8121132.032.0734.11YES-33588402164.217.73YES2
11.20€
extremeways11126.891.5628.45YES1328441292.153.78YES
+ 27.85€ for
shipping cost
1
5.60€
YES
408 g
Australia
uunek220.81.0421.84YES04/15/2015
Shaf11126.891.5628.45YESWait for
components
1328441285.923.42YES
+ 23.70€ for
shipping cost
Canada
gseb3346.623.1159.73YES04/07/2015
cromwell11126.891.5628.450YES
190 g
skwayb1121.751.0422.79YES
+12.15€ for
shipping
13284476.833.21YESYES
359 g
chiark11126.891.5628.45YESWait for components24316441289.775.34YES1
5.60€
YES
448 g
UK
CUF8511126.891.5628.45YES04/08/2015
fatbob_gb11126.891.5628.45YES13284412
Prog
85.923.24YES
+12.15 for
shipping cost
1
5.60€
YES
426 g
UK
hese2231.082.0733.15YES2x12x8291.553.47YES2
11.20€
YES
478 g
Finland
Francesco1115.541.0416.58YES11181252.322.13YESYES
183 g
Italy
wali71115.541.0416.58YES2851.332.06YES
49.33€
(2€ of fees)
1
5.60€
YES
246 g
Poland
sjuswede1115.541.0416.58YES11181252.322.13YES1
5.60€
YES
361 g
Ordyne1.221
Total:201020439.7927152219943628121811
Remaining:0003


The following table is for components order is for the GBA1000 expansions and also for the Picasso"Matze".
You'll find the components that you have ordered with the unit price of each of them, and the total price in USD and in Euro.
Please, I'll accept only payment in Euro. Actual conversion rate: $1 USD = 0.919665 €



Parts Ref →
CL-GD5434-J-QC-F
XC95144XLXC9572XLM514260E-60JK4S561632J-UC6074ALVT16543DGGSL811HSGAL16V8B-25QPamount
in USD

amount
in Euro

Unit Price →9,333,353,352,331,671,651,351,17

Tahoe0000001+12+23.69 x 23.44 x2
DutchinUSA0112042020.6619.25
Tuxbar81537164802139.65130.10
extremeways1328841268.3763.69
Shaf132
8441261.6957.47
skwayb132844005854,04
chiark24316441296.3689.77
fatbob_gb1328441261.6957.47
hese20012802062.6858.39
Francesco1118001238.3635.74
wali72008000037,334,75
sjuswede1118001238.3635.74
Ordyne101400002220,50
viserys23202800004440,99
shaf101400002220,50
johey3031200006661,49
piacc64101400002220,50
Cryton101400002220,50
Total :26223013836321218884.81824.32


In the following table, you'll find the final amount you'll have to pay. The amounts are in €uros!
When it's possible, you have the choise between TRACKED or REGISTERED option.


Member
Package
Weight
CountryZoneTracked
shipping
amount

Registered
shipping
amount

Components
Taxes
86 pins
connector
price
Ship already Paid
Total amount with tracked
Total
amount with Registered
Paid
Sent
Tahoe156gThe NetherlandsA7,712,150,4008,112,55YES06/24/2015
DutchinUSA94gGermanyA5,512,151,125,6012,2218,87YES06/18/2015
Tuxbar81-
extremeways408gAustraliaC
23,73,685,627,85
5,13YES07/18/2015
Shaf390gCanadaC

23,7
4,51023,7
4,51YES06/18/2015
cromwell190gSwedenA7,712,150007,712,15
skwayb359gUSAC
23,73,130
12,15
14,68YES09/02/2015
chiark448gUnited KingdomA
12,155,195,60
22,94YES06/18/2015
fatbob_gb426gUnited KingdomA
12,153,325,612,15
8,92YES06/20/2015
hese478gFinlandA
12,153,3811,2026,73YES06/23/2015
Francesco183gItalyA7,712,152,07009,7714,22YES
wali7246gPolandA
12,152,015,6019,76YES06/23/2015
sjuswede361gSwedenA
12,152,075,6019,82




Shipping rates:

International with track number: (Max height of the package: 3 cm)
Weight up to:
100g250g500g
Europe5.20€
7.70€10.20€
World5.80€9.70€11.70€



International with track number & registered: (begin with 0 to 500g...)

Weight up to:
500g
Europe (Zone A - European Union, Switzerland)12.15€
World Zone B (Norway, Eastern Europe except Russia)16.20€
World Zone C (Other destinations)23.70€

Payment:

When your PCBs are ready to be shipped, I send a PM to ask for your postal address and to give you the total amount and my Paypal address.

As for the first batch, I don't make any profit with the production of PCBs. My goal is to obtain PCBs for a good price for the Amiga community and of course for me!

I DON'T ASK FOR PAYMENT BEFORE THAT YOUR ORDER IS READY TO BE SHIPPED.

Payment by Paypal with Gift option or buyers pay the fees.
 
Last edited:
Looking on the Picasso II PCB, it seems that there is a new version (ver 3.3 including ratte switch). It's on Georg's internet page.
If you'll make a batch with the 3,3 rev, i could be interested. Do you know +- the price per unit for those boards ?
 
Yes, I know. I have all versions, and I have generated the Gerber files for all revisions.
For the first batch, I have produced the 3.2 rev since we had already bought the ICs (GALs and Xilinx).
For this new batch I have planed to produced the 3.3 rev.:)

The price will depend on the number of PCB ordered.
 
Expressing interest in one extra thylacine (already one in the first batch) and a Picasso rev 3.3 please!
 
Last edited:
Looking on the Picasso II PCB, it seems that there is a new version (ver 3.3 including ratte switch).

If I don't make mistake, The difference beetwen 3.2 and 3.3 rev is the GALs which are replaced with an XC IC.
 
Yes, sorry :oops:
The 3.2 has the switch too...

No problem my friend! :)

For information, onto the DHL website, the state of the parcel of the first batch is: "Departed Facility in HONG KONG"
It is in DHL agency since some days... It's long. I hope to have them in the begining of the week...
 
Last edited:
Hi. count me in for one 68060 accelerator PCB and one Picasso graphic PCB please......

THX...
 
Last edited:
Little question (might be answered already in a previous thread) : how do we get the components after that ? Is there lists or kits available somewhere ?
 
Is the 32 MB card interesting for the GBA 1000 and compatible with all these goodies ?

And by the way, are all of these cards compatible together to go in ONE single machine ?
 
The ICs can be found near UTSource for example.
The classic components (Resistors, capacitors,etc) can be found near classic electronic sellers.

No, the 32Mb card is not interesting for the GBA1000. It's now an obsolete expansion. The eagle files are not available for this board.
And the 68060 accelerator board gives 64 ar 128Mb depending of RAM chip used.

The 060 board, the Mini-Thylacine & the Picasso Graphic board can be can be used onto a one single GBA1000.
To use the Picasso board, the 060 is absolutely necessary.
 
Please put me down for 1 of each board please Tuxbar81 (1 x accelerator + 1 x Thylacine + 1 x picasso)

I'm kicking myself that I missed the first batch.

Thanks!
 
This sounds really awesome.. I want to be clear though.. These boards are for... A Zorro II slot or does the GBA1000 68060 go into the processor slot on a A2000? If the answer to that is "Yes" then please put me down for all three as well.
 
This sounds really awesome.. I want to be clear though.. These boards are for... A Zorro II slot or does the GBA1000 68060 go into the processor slot on a A2000? If the answer to that is "Yes" then please put me down for all three as well.

Sorry, but the 060 accelerator board is plugged into the 68030's socket of the GBA1000.

The Picasso board is a Zorro II board, but you should be more interested with this version:

https://www.amibay.com/showthread.p...ic-PCB-for-A500-A2000-A4000-GBA1000-1st-Batch

For the mini-thylacine, you should take a look at this excellent thread launched by genny_flick:

https://www.amibay.com/showthread.php?53997-MiniThylacine4Ports-(PreOrder)&highlight=mini-thylacine

Voilà!
 
Preliminary interest in a Picasso and a Thylacine board for a GBA1000. I think I have a GBA1000 incoming, and will know before the end of the coming weekend. If I do I want the Picasso and Thylacine for sure.
 
Status
Not open for further replies.
Back
Top Bottom