PDA

View Full Version : GVP A1230 Turbo + Series I (MK1) Repair



amigaoasis
29th November 2014, 16:27
Hi,

Looking to see if there is anyone in the UK or Europe able to offer a service/repair on an A1230 Turbo + (MK1) board.
After sourcing a proper manual and checking everything is configured I am unable to get the device to detect memory.

The board registers and the 68030 + FPU both show up under sysinfo but neither the 4mb or 16mb (or both) show up.
Both were purchased from different sources and both are proper GVP 64pin modules.

The only conclusion I am left with is there is something night quite right with the board.

If you have any experience with these cards let me know.

Thanks