PDA

View Full Version : 4xEIDE99



britlord
23rd March 2015, 03:00
Hi Amiga nuts. I've fixed my 4xEIDE'99 (Track from pin 43 burned in half), so I want to try it again (Sigh). Will a CF card boot right away (connected to the 2.5" Primary port), or do I need to install the driver from the disk first. You see I've had 2 of these and they both never worked (Both burned the same track at pin 43 on the 44 pin header), and I would have never known if I hadn't removed the 44 pin header (Track is under the header)

supaduper
23rd March 2015, 06:34
if you put you cf on the 44 pin primary port than no you don't need to run the install software.

Why have you removed the 40 pin Primary 3,5" header ?

britlord
23rd March 2015, 13:00
if you put you cf on the 44 pin primary port than no you don't need to run the install software.

Why have you removed the 40 pin Primary 3,5" header ?

Because I'll never use it. I'm just want to fit a Cd drive on the other header... Plus it was almost touching the top shield too

supaduper
23rd March 2015, 13:08
Oh ok, tell us hows goes it dude when you do the set up :thumbsup:

britlord
24th March 2015, 13:32
Ok will do...

Thanks..