PDA

View Full Version : Wanted Size Amiga Tick / Double Check Mark



Zorro
4th January 2016, 13:14
Hi all,

Happy New Year!

As I do not own an Amiga device with the Amiga tick / double check mark logo I would much appreciate if someone can provide me the exact size of the square (in mm) of the logo label. Also, I think they're all the same size on every device (A1000, A1010 disk drive, A1000 keyboard). :unsure: Can someone double check please?

Much, much appreciated! :thumbsup:

Zorro
25th January 2016, 16:37
bump..

MindWalker
25th January 2016, 17:29
15mm x 15mm. At least on my A1000 and its keyboard.

Zorro
25th January 2016, 19:01
Thanks a million! :thumbsup:

- - - Updated - - -

Anyone with an A1010 floppy disk drive or other Commodore Amiga device with the square badge?

bootsie
26th January 2016, 07:59
Just measured mine with digital calipers..

A1010 check is 12.25mm square
A1000 check is 14.80mm square
A1000 "Amiga" is 33.75mm x 14.80mm

That's the actual badge size, slightly smaller than the recess in the case.
I haven't measured keyboard as accurately as the badge is still fitted, but looks like 14.8mm again - slightly under 15mm.

Zorro
27th January 2016, 22:05
Thanks, much appreciated!


Just measured mine with digital calipers..

A1010 check is 12.25mm square
A1000 check is 14.80mm square
A1000 "Amiga" is 33.75mm x 14.80mm

That's the actual badge size, slightly smaller than the recess in the case.
I haven't measured keyboard as accurately as the badge is still fitted, but looks like 14.8mm again - slightly under 15mm.