Closed Atari Falcon CT60 swap for Blizzard1260

Status
Not open for further replies.

Oldskool1

Member
Rating - 100%
8   0   0
Joined
Jul 29, 2010
Posts
151
Country
Netherlands
Have a complete Atari Falcon setup I don't use that much.
Will swap this for an Amiga 1200 turbo card Blizzard 1260 (memory is not required)).

- Atari Falcon
- 14 MB ST memory
- CT60 (68060)
- 128 MB SDRAM
- external scsi cd rom
- internal HD 20 GB
- In original housing with uATX

So if your interested in one of the fastest Atari machines around.
 
Last edited:
@Oldskool1
Is your proposal to swap 1:1 without any extra money from another side?
Do you have some pictures of this nice set?
I might be interested. :)
 
Yes I want to swap it without extra money.
The mainboard has been checked 1,5 years ago by Rodolphe Czuba in France (hardware expert Atari)
Hereby some pictures (Atari is running MINT-XAAE-Jinnee).
 

Attachments

  • DSCF0106.jpg
    DSCF0106.jpg
    180.6 KB · Views: 0
  • DSCF0107.jpg
    DSCF0107.jpg
    189.9 KB · Views: 1
  • DSCF0109.jpg
    DSCF0109.jpg
    177.5 KB · Views: 0
  • DSCF0110.jpg
    DSCF0110.jpg
    206.8 KB · Views: 0
  • DSCF0111.jpg
    DSCF0111.jpg
    89.4 KB · Views: 0
Ok, please give me 3-4days to check if I can get Blizzard 1260 for you.
If I will not managed to provide you Blizzard 1260 within this time I will pass and second person that will declare interest can take it.
 
No Problem.
Also got somebody else interested in the set-up.
He is also trying to get a Blizzard 1260 for me.
Please send a PM or reply on this post before you buy anything.
It would be very annoying if two people buy a b1260 for me.:Doh:

---------- Post added at 10:33 ---------- Previous post was at 09:47 ----------

The above message is meant for Stachu.

So please contact me before you buy something. And don't buy something ridiculous expensive from ebay.

There is also somebody in the Netherlands interested. He was a little bit earlier.

So I have the following intereseted people:

Mister X --> Stachu --> Jon Hare

The swap is meant to keep to cost low.
 
There is also somebody in the Netherlands interested. He was a little bit earlier.

So I have the following intereseted people:

Mister X --> Stachu --> Jon Hare

Just for information...if this Mister X get in touch with you here on Amibay he obviously didn't replied in the thread but PM'ed you. And that's against the rules I'm afraid...
 
Hi Jon,

No that was via another forum.

Hi Stachu,

Looks very interesting
Does that fit in a standard A1200 housing?
Will reply on your offer tonight via PM.
 
Hi Oldskool1,

Yes, it will fit into desktop thanks to special cooling system. I've built 3 of such cards and all of them are working fine @80MHz.
 
Yeah it is a great machine especially when you use it for more serious applications (Music, Midi, DSP etc.).
Also the MINT OS in it's current form is very stable and is compiled for 040/060 (In some ways I like this much better then workbench).
Also great standard vga output capabilities.
I have traded with somebody who will us it for music. I'm sure he will enjoy this machine.

Can be closed.
 
Status
Not open for further replies.
Back
Top Bottom