PDA

View Full Version : For Sale Many motherboards (286,386,486,Slot1, soc 370/dual)



Paadam
21st November 2016, 10:31
114939114940114941114942114943114944114945114946114947114948
Hi guys! Newbie here but have been in Thinkpad forum for years (under name of "Raceboy", sam nickname in many Porsche forums (Rennlist, pelican Parts, 924board.org).
I have been collecting retro-stuff for years, it's time to sell the excess.
All boards I am selling are tested to work, no DOA warranty, unless stated otherwise (read carefully).
Shipping is ~20 euros to Europe and ~25 euros to US/Canada, Australia etc. Note that I do not accept Paypal, only IBAN transfer.
CPU's and memory on the photos is not included unless otherwise specified.

*QDI SIS 486 P3 Green PC rev 4.0 soc 2. 35 euros.

* [SOLD]QDI P51430TX/250E soc 7. Comes with 200MMX CPU and 2x32MB EDO DIMM. 30 euros.

* [SOLD]Asus VL/I-486SV2(GX4) soc 3, marking says it is GX4 but there is no voltage regulator soldered, probably the GX4 was covered with the white tape (like it was from Asus) and someone scraped it off. It is possible to add components and make it 3v board (easy to do). 70 euros.

*[SOLD]Asus TX97-XE soc 7. Comes with 233MMX CPU. One of the best soc7 TX boards. 30 euros.

*Asus CUR-DLS (HP OEM) dual soc 370. Comes with 800MHz CPU and terminator. 50 euros.

*Chaintech 6ESA2-E100N Slot 1. 15 euros.

*Chaintech 6VIA3-F100N soc 370. 15 euros.

*[SOLD]Chaintech 5AGM2-F-150 super soc 7. Comes with K6-2 500Mhz AFC CPU. 35 euros.

*Intel D815EEA2 soc 370. 25 euros.

*[SOLD]Tyan Tsunami S1846 Slot 1 (works with Coppermines, no problem running 133
FSB). Comes with Slot 1 Coppermine CPU (have several, 600 or 650 Mhz). 25 euros.

*Intel SAI2 Server board dual soc 370 (heatsink retention clip on one socket is broken, otherwise works perfectly. I used glued heatsink). Board is 25 euros, I can include 2x Pentium III-S 1.4 GHz CPU's for 40 euros extra.

*[SOLD]286 12 MHz board, with 287 co-processor. 30 euros.

*Intel STL2 Server board. Dual soc 370, supports Coppermines. 30 euros. Have 2x 1GHz Pentium III CPU's for 20 euros extra.

*[SOLD]Lucky Star LS-486E PCI board. Very good board, works even at 66MHz bus speed (and has PCI 1/2 divider jumper!): https://www.vogons.org/viewtopic.php?f=46&t=43193. 65 euros.

*486 ALi M1489 chipset PCI board, works quite fast but apparently has fake cache chips. Supports all 486 CPU's. 15 euros.

*[SOLD]386 ISA board (works with 486DLC CPU's too: http://www.uncreativelabs.de/th99/m/U-Z/32980.htm. I don't have any 386 CPU's to test it with to verify the working but it came from working system. 20 euros.

*386 Forex chipset motherboard. Special about it that it supports PGA 386 40Mhz CPU's. http://th99.classic-computing.de/src/m/E-H/32915.htm I don't have any 386 CPU's to test it with to verify the working but it came from working system. 20 euros.

d0pefish
21st November 2016, 18:24
Declaring interest in the Asus VL/I-486SV2(GX4) motherboard.

Sending PM :)

Paadam
21st November 2016, 19:44
PM returned, pending payment.

d0pefish
21st November 2016, 20:27
Payment process started via IBAN.

Thanks! :)

Paadam
23rd November 2016, 11:01
Asus VL/I-486SV2(GX4) board SOLD to d0pefish :)

iPonRMA
24th November 2016, 07:13
Declare interest: *386 ISA board (works with 486DLC CPU's too: http://www.uncreativelabs.de/th99/m/U-Z/32980.htm. I don't have any 386 CPU's to test it with to verify the working but it came from working system. 20 euros.

May i ask photos?

Paadam
24th November 2016, 11:36
I'll take photos later today.

Paadam
24th November 2016, 19:26
Here's photo of the 386 board.

Paadam
30th November 2016, 10:09
Have few other motherboards for sale:

*Intel D850GB soc 423 board with 1.4GHz Willamette P4 CPU and 4*128 MB RDRAM. 25 euros
*Tyan Tiger MP S2460 dual soc A (socket 462), with AMD 760 shipset. Good and affordable dual platform, works even with Duron CPU's. Came from working system. 50 euros.

d0pefish
30th November 2016, 15:54
Asus 486 received safely in the UK - *excellent* job with the packaging :) Thankyou!

Leaving positive feedback for you.

Paadam
30th November 2016, 16:45
Glad to hear! :) Have fun with it!

iPonRMA
3rd December 2016, 06:13
Withdrawn interest for this board.


Here's photo of the 386 board.

Richo
4th December 2016, 19:13
Declare Interest: Asus TX97-XE soc 7. Comes with 233MMX CPU.
PM sent

Paadam
6th December 2016, 19:15
PM's replied.

iponRMA, if it's not a secret why you lost interest? Just for future reference, that's all :)

Paadam
8th December 2016, 11:49
Here are photos of the Asus TX97-XE and Lucky Star LS-486.

Paadam
14th December 2016, 19:48
Asus TX97-XE is sold.

d0pefish
16th December 2016, 00:27
@Padaam:

Just a quick note to say I successfully added the missing components to the Asus motherboard to give it 3.3V support! :D
It auto-detects the CPU and switches between 3.3V and 5V when different CPUs are inserted.

Very happy with the board, it's going to make a fantastic high-end 486 system.
Thanks again for the great sale! :)

hardcore8uk
22nd December 2016, 09:17
Declared interest on Chaintech 5AGM2-F-150 super soc 7

Paadam
22nd December 2016, 10:34
Yes, it is still available, I already replied to your email!

retro-pc_user
22nd December 2016, 20:30
The one QDI 486 board. Is that the first picture on this forum? Also, about the Forex 386 motherboard, can you please post pics of said board? I might be interested in either the QDI 486 or the Forex 386, but I don't have an AT style PSU, case, GPU, or expansion cards ATM. I'll let you know if I'm interested or not in either of the boards.

Paadam
23rd December 2016, 12:30
Yes, 1st photo is of the QDI board.
I'll look for the Forex 386 photos, should have them taken somewhere.

I have VLB Cirrus graphics card and few ISA and VLB controller boards, also few AT PSU's and cases if you want. Shipping AT case with stuff would be ~35 euros to US.

Bringer_Of_Death
24th December 2016, 23:08
Hi, could you identify your pictures to the description? I see a mb I would like but I cannot figure out which one it is lol

Thanks

Mike

Paadam
26th December 2016, 10:45
Haven't figured out how to tag photos but you could quote the photo link of the board you like perhaps?

Bringer_Of_Death
26th December 2016, 12:11
Haven't figured out how to tag photos but you could quote the photo link of the board you like perhaps?

Photo 6 IMG_4156,jpg

Thanks

Mike

Paadam
26th December 2016, 17:06
This is:

*Tyan Tsunami S1846 Slot 1 (works with Coppermines, no problem running 133
FSB). Comes with Slot 1 Coppermine CPU (have several, 600 or 650 Mhz). 25 euros.

Madowax686
5th January 2017, 11:29
If it's still available, I'm declaring interest in the LS-486e motherboard.

Madowax686
7th January 2017, 08:52
Payment via bank transfer started few minutes ago.

Thank you very much.

Paadam
11th January 2017, 19:53
Payment received for LS-486E board, shipping tomorrow!

Madowax686
31st January 2017, 23:28
Ls-486e received and tested (I have still to test serial ports and parallel one), working good, your package was uber and the mobo is in perfect condition, thank you very much for everything.
Feedback left.

Paadam
1st February 2017, 08:11
You are most welcome :) Pleasure to do business with you!

moijk
1st February 2017, 14:58
I'm interested in:
*Chaintech 5AGM2-F-150 super soc 7. Comes with K6-2 500Mhz AFC CPU. 35 euros.

any of the others ATX with isa slots?

Paadam
1st February 2017, 16:06
5AGM2-F-150 is AT board, it has both ATX and AT power connectors.

ATX with ISA slots are:

*Chaintech 6ESA2-E100N Slot 1. 15 euros.

*Chaintech 6VIA3-F100N soc 370. 15 euros.

*Tyan Tsunami S1846 Slot 1 (works with Coppermines, no problem running 133
FSB). Comes with Slot 1 Coppermine CPU (have several, 600 or 650 Mhz). 25 euros.

386_junkie
4th March 2017, 23:09
Declaring interested in... "*386 Forex chipset motherboard. Special about it that it supports PGA 386 40Mhz CPU's. http://th99.classic-computing.de/src/m/E-H/32915.htm I don't have any 386 CPU's to test it with to verify the working but it came from working system. 20 euros."

... do you have any pictures?

Paadam
7th March 2017, 10:18
Will take photos later today.

Paadam
9th March 2017, 08:58
Here are photos of the Forex 386 board.

119170119171

Epongette
11th March 2017, 00:09
Hi,

Declaring interest in : 486 ALi M1489 chipset PCI board, works quite fast but apparently has fake cache chips. Supports all 486 CPU's. 15 euros.
Any pictures available ? How much to send it to Belgium ?
Thanks

moijk
25th March 2017, 18:23
Declaring interest in Tyan Tsunami S1846 Slot 1 and 5AGM2-F-150

Paadam
25th March 2017, 20:15
Sorry for the delay, I was on vacation, will upload photos tomorrow. Shipping to Belgium is 22 euros.


Hi,

Declaring interest in : 486 ALi M1489 chipset PCI board, works quite fast but apparently has fake cache chips. Supports all 486 CPU's. 15 euros.
Any pictures available ? How much to send it to Belgium ?
Thanks

- - - Updated - - -


Declaring interest in Tyan Tsunami S1846 Slot 1 and 5AGM2-F-150




Sent PM!

Paadam
31st March 2017, 06:19
Forum was down for some reason few days, couldn't access at all.
Here are photos of the 486 ALi M1489 chipset PCI board:



119959119960

Paadam
4th May 2017, 09:58
Bump! Still have many boards to offer!

valkiry
4th December 2017, 17:12
I am interested to buy this MOBO: Chaintech 6VIA3-F100N soc 370. Could you tell me if it always available ?

Thelemorf
4th December 2017, 20:31
486 ALi M1489 chipset PCI board, works quite fast but apparently has fake cache chips. Supports all 486 CPU's. 15 euros

Interested in that one.

Paadam
26th December 2018, 15:36
I was away from retro-stuff for a while, now back at it. So if anyone wants anything from the list, let me know :)

CarlosTex
26th December 2018, 16:29
Hi, link for the 386 Forex motherboard isn't working. I might be interested.

kixs
26th December 2018, 16:55
Most photos are in the thread. Forex's here:

http://www.amibay.com/showthread.php?88030-Many-motherboards-(286-386-486-Slot1-soc-370-dual)&p=830121&viewfull=1#post830121

Whisper
26th December 2018, 17:01
Declaring interest in:

286 12 MHz board, with 287 co-processor. 30 euros.




Sending PM

CarlosTex
26th December 2018, 17:25
Photo isn't really clear, i would like to confirm to confirm numbers on the Forex chipset.

Paadam
27th December 2018, 14:18
I am interested to buy this MOBO: Chaintech 6VIA3-F100N soc 370. Could you tell me if it always available ?

It is available.

- - - Updated - - -


Photo isn't really clear, i would like to confirm to confirm numbers on the Forex chipset.

FRX46C402 and FRX36C300

- - - Updated - - -


486 ALi M1489 chipset PCI board, works quite fast but apparently has fake cache chips. Supports all 486 CPU's. 15 euros

Interested in that one.

Still available.

Paadam
2nd January 2019, 22:13
Bump!

Paadam
8th January 2019, 19:41
Bump!

HSG
11th January 2019, 12:45
I'd like to declare interest in the QDI SIS 486 P3

marcushg85
11th January 2019, 16:50
Declaring interest in QDI P51430TX/250E soc 7. Comes with 200MMX CPU and 2x32MB EDO DIMM. 30 euros. Sending PM

Paadam
11th January 2019, 20:25
Replied to both PM's!

I am open to some trades also, particularly interested in Voodoo Banshee PCI.

HSG
14th January 2019, 13:59
Unfortunately have to withdraw interest in QDI SIS 486 P3

Paadam
15th January 2019, 07:15
Unfortunately have to withdraw interest in QDI SIS 486 P3

I should specify that the deal did not go through because of the payment method, board itself works perfectly :)

nessie
24th January 2019, 23:21
I declare interest in the 386 ISA board. Pm sent.

swisstoni
25th January 2019, 00:26
Declaring interest in QDI SIS 486 P3 Green PC rev 4.0 will this board accept a 486 DX 266 also please can you confirm the board dimensions (I want to check it will fit my tower case).

Paadam
25th January 2019, 09:20
You mean 486 DX2 66? I tested it with this processor, worked.

swisstoni
25th January 2019, 11:52
Yes sorry I did mean 486 DX2 66 thanks for confirming could you also please confirm the board dimension sizes. Many Thanks.


You mean 486 DX2 66? I tested it with this processor, worked.

CarlosTex
25th January 2019, 22:49
Declaring interest in the 386 Forex board.

Paadam
26th January 2019, 22:19
I have not measured but it is regular baby-AT square board.

Whisper
27th January 2019, 08:11
Declaring interest in:

286 12 MHz board, with 287 co-processor. 30 euros.




Sending PM


Mobo received and it works properly. Positive feedback left

swisstoni
27th January 2019, 12:17
Interest withdrawn


Yes sorry I did mean 486 DX2 66 thanks for confirming could you also please confirm the board dimension sizes. Many Thanks.


You mean 486 DX2 66? I tested it with this processor, worked.