PDA

View Full Version : For Sale Usb and PS2 Joystick/Gamepad Adapter for Amiga Atari Commodore 9pin D port!



ikonsgr
29th November 2016, 17:58
Hi everyone,

I've managed to make this adapter which gives you the ability to use many usb joysticks/gamepads with old home micros equipped with atari gameports like amiga, atari st, atari 8bit, Commodre 64 etc!
As you can see here (http://www.ebay.ie/sch/m.html?_odkw=usb&_ssn=ikonsgr74&_armrs=1&_osacat=0&_from=R40&_trksid=p2046732.m570.l1313.TR10.TRC0.A0.H0.Xusb+ps2.TRS0&_nkw=usb+ps2&_sacat=0) i have made extensive tests with many joysticks/gamepads and fortunately, only some very cheap usb gamepads didn't seem to work right. The amazing thing is that, the adapter works even with "Hard" and complicated controllers like a wheel/pedal controller or microsoft's sidewinder! :)
If anyone is interested, i sell it for 26euros in total, and paypal payment (https://www.paypal.me/ikonsgr/26).
Give me a note to arrange it.

Thanks.

DjCook
29th November 2016, 18:38
Great stuff,
however, i think it will be a problem to attatch it to Atari XE series computers..

ikonsgr
30th November 2016, 12:36
It helps very much the fact that instead of having a rigid and unhandy long adapter that plugs directly on the 9pin D port, the 9pin D connector is attached on a small and flexible ribbon cable.
So,i have tested the adapter with atari 520st and it fits in the "tunnel" underneath just fine.I will check it with atari XE too, and i'll let you know.
In any case, i think that with these very cheap port savers (http://www.ebay.ie/sch/m.html?_odkw=&_ssn=ikonsgr74&_armrs=1&_osacat=0&_from=R40&_trksid=p2046732.m570.l1313.TR12.TRC2.A0.H0.Xsaver.TRS0&_nkw=saver&_sacat=0) i also make, it will fit just fine! ;-)