Which Oscillator for TF530 rev.3 accelerator board....

B

britlord

New member
Joined
May 30, 2013
Posts
1,759
Country
usa
Region
Michigan
Guys. I'm building one of those TF530 rev.3 accelerator board. But to run it at 50MHz do I use a 50MHz Oscillator or a 25MHz one...
 
depending on CPU, FPU & firmware You gonna use
 
Last edited:
Well a say a 50Mhz CPU and 40MHz FPU, so is 50Mhz double the Oscillator, Or just solder in a 50Mhz one..

On the rev 3 Bom. It's "1 X20MHZ OSCILLATOR OSC_7X5MM OSC1 Oscillator e.g. 24MHz", is that say 40Mhz or just 20MHz...

Oh Firmware will be Rev 3 Beta 2, and the guy i running the board at 48MHz..
 
Last edited:
If You like to run this board @ 50Mhz - You need 40/50Mhz CPU, 68882 40Mhz FPU, 50Mhz oscillator and firmware.
Stephen just forgot to update the BOM file
 
OK Thanks so much....OH, What's the latest firmware for version 3 of the board...
 
Last edited:
Thanks. Though I'll now have to order the ram and other chips, so I'm ready when his TF535 board becomes available....
 
Sorry to jump in this thread... The BOM says 5x7mm oscillator, what if we use 2.3x3mm for example?

Also when you run cpu @33MHz which oscilattor MHZ should use? 33.88? Or 32.6?

Sent from my Redmi Note 2 using Tapatalk
 
You must log in or register to reply here.
Back
Top Bottom