highpuff
Active member
For sale
Selling one of my assembled Amy-ITX complete with MOS-chipset, MC68000 CPU to the Amiga community. I have totally made 6 of them but all the rest if for me (muahaha) and my close friends.
What is included:
1x Amy-ITX professionally assembled and tested
1x 2MB Chipmem Module including RTC chip
1x MC68000 CPU
1x ECS Chipset (ECS Denise + 2MB Agnus PAL)
2x 8520 PLCC CIA
1x Kickstart ROM (1.3 or 3.1)
Price:
599€ + Tracked Shipping sent as gift to my Paypal.
Let me know if you have any other questions.
Meet AMY
Based around the original custom chips of the Classic Amiga™ computer from Commodore™ I’m ready to run all your favorite Classic games and applications. My core design focuses on compatibility, stability and flexibility. My designer is an experienced hardware engineer and he started this project around 2010. Since then I’ve undergone some major design changes. Early boards were larger (ATX+) and based solely on through hole components. In the latest revision (they call me Amy-ITX now…) all non Commodore custom electronics are super small SMD (Surface-Mount Devices). This not only makes me smaller in size (about 50%) but also cuts cost and makes me more environmentally friendly.
My friends and family have played with me for several years already. And thanks to my original components I don’t have to rely on emulation or programmable gate arrays (FPGA’s). My design is quite elegant and compatibility is extremely high.
Technical
Mainboard
Size / Power
– 170 x 170mm Mini-ITX size with full standard compatibility.
– 24-pin standard ATX-power supply connector.
Ports
– 2x 100-pos Female Card Edge Connectors (Zorro II compatible).
– PS/2 connector for mouse.
– PS/2 connector for keyboard.
– 2x DB9 Joystick ports where one can be used as a serial mouse port.
– 1x DB25 serial communication port.
– 1x DB25 parallel communication port.
– 1x DB15 wide Audio Video (AV) port. (Non HD so NOT VGA)
– 1x Floppy 3.5” connector (internal).
Headers
– 1x 3-pin header to connect internal sound.
– 1x 3.5mm connector for external sound.
– Pin header for power on, reset and power led.
Other
– Support for full ECS-chip and 2Mb chip memory.
– ROM-bank switching if using a 27C800 ROM.
Chipmem Module
Memory
– 2MB chip memory (maximum amount of chip memory)
Connectors/Ports
– 1x 56-pos connector (non Amiga 500 compatible)
– 1x 18-pos IC-connector for optional Real-Time Clock (MSM6242B) (Included)
Selling one of my assembled Amy-ITX complete with MOS-chipset, MC68000 CPU to the Amiga community. I have totally made 6 of them but all the rest if for me (muahaha) and my close friends.
What is included:
1x Amy-ITX professionally assembled and tested
1x 2MB Chipmem Module including RTC chip
1x MC68000 CPU
1x ECS Chipset (ECS Denise + 2MB Agnus PAL)
2x 8520 PLCC CIA
1x Kickstart ROM (1.3 or 3.1)
Price:
599€ + Tracked Shipping sent as gift to my Paypal.
Let me know if you have any other questions.
Meet AMY
Based around the original custom chips of the Classic Amiga™ computer from Commodore™ I’m ready to run all your favorite Classic games and applications. My core design focuses on compatibility, stability and flexibility. My designer is an experienced hardware engineer and he started this project around 2010. Since then I’ve undergone some major design changes. Early boards were larger (ATX+) and based solely on through hole components. In the latest revision (they call me Amy-ITX now…) all non Commodore custom electronics are super small SMD (Surface-Mount Devices). This not only makes me smaller in size (about 50%) but also cuts cost and makes me more environmentally friendly.
My friends and family have played with me for several years already. And thanks to my original components I don’t have to rely on emulation or programmable gate arrays (FPGA’s). My design is quite elegant and compatibility is extremely high.
Technical
Mainboard
Size / Power
– 170 x 170mm Mini-ITX size with full standard compatibility.
– 24-pin standard ATX-power supply connector.
Ports
– 2x 100-pos Female Card Edge Connectors (Zorro II compatible).
– PS/2 connector for mouse.
– PS/2 connector for keyboard.
– 2x DB9 Joystick ports where one can be used as a serial mouse port.
– 1x DB25 serial communication port.
– 1x DB25 parallel communication port.
– 1x DB15 wide Audio Video (AV) port. (Non HD so NOT VGA)
– 1x Floppy 3.5” connector (internal).
Headers
– 1x 3-pin header to connect internal sound.
– 1x 3.5mm connector for external sound.
– Pin header for power on, reset and power led.
Other
– Support for full ECS-chip and 2Mb chip memory.
– ROM-bank switching if using a 27C800 ROM.
Chipmem Module
Memory
– 2MB chip memory (maximum amount of chip memory)
Connectors/Ports
– 1x 56-pos connector (non Amiga 500 compatible)
– 1x 18-pos IC-connector for optional Real-Time Clock (MSM6242B) (Included)