Hi,
Instead of making 10 posts, I like to post here, some of my little projects that I have for sale.
Amiga CD32 riser adapter:
New version of my CD32 riser. This goes on the back of the cd32 and provide connection for VGA monitor (15khz), ps2 keyboard, 3.5mm audio output, and an aditional edge connector to plug an upgrade. This riser works great with the last RAM+IDE upgrade made by S. Leary, the TF328.
Price: 38€.
Purchase link, here: https://www.arananet.net/pedidos/product/cd32-riser-adapter-hefesto-light/
IdeLed A500:
This small pcb allows to use the floppy led of the Amiga 500 keyboard led and use it as hdd led too. For example if you want to see HDD activity of the vampire 500 or the Matze’s 68020tk this board will show the hdd activity.
Price: 7€.
Purchase link, here: https://www.arananet.net/pedidos/product/ideled-for-amiga-500/
Mnemósine500 Trapdoor expansion for Amiga 500:
Mnemósine500 is a little tiny trapdoor expansion board for the Amiga 500. It allows to add 512kb of chipram (512kb of fastram/low, depends on the system). Its just plug and play.
Price: 20€.
Purchase link, here: https://www.arananet.net/pedidos/product/mnemosine500-trapdoor-expansion-for-amiga-500/
RTC Battery kit:
RTC Battery kit is used to replace the common retro battery Ni-MH. This kit came with the battery holder, a diode to avoid charging the battery via the motherboard.
Price: 3,5€.
Purchase link, here: https://www.arananet.net/pedidos/product/rtc-battery-kit/
RTC clock for Amiga 1200 (or others with clockport)
This board allows to provide RTC on a standard Amiga 1200 via the clockport expansion port.
Price: 15€.
Purchase link, here: https://www.arananet.net/pedidos/product/rtc-clock-for-amiga-1200-or-others-with-clockport/
ScanLine Generator
The ScanLine Generator is little board that generates scanlines, replicating the appearance of older CRT monitors on modern, hi-resolution LCD/LED displays. You can see the pic gallery to see the effect.
Price: 16€.
Purchase link, here: https://www.arananet.net/pedidos/product/scanline-generator/
Ultimate Amiga RGB to VGA Adapter with RGB amplifier
This adapter allow to connect the RGB signal from the DB23 video connector of the Amiga to a VGA monitor or to an scandoubler.
Price: 18€.
Purchase link, here: https://www.arananet.net/pedidos/product/ultimate-amiga-rgb-to-vga-adapter-with-rgb-amplifier/
SDNET Adapter
This adapter allows to connect a Enc28j60 module to the Apollo’s Vampire Accelerator and offer ethernet connection. Also has a MicroSD connector so you can use the SD card too. Also includes a 3.3k resistor required to use with the Enc28j60 module. Due to the last core update, this sdnet adapter is for use on the V600, the V500 V2+ already include an expasion port for connect the enc module.
Price: 7,5€
Purchase link, here: https://www.arananet.net/pedidos/product/sdnet-adapter/
All the shipping goes via non tracked shipping. Worldwide. 2€.
Any question, please contact me via PM or at my email info at arananet dot net
Regards,
Edu.
Instead of making 10 posts, I like to post here, some of my little projects that I have for sale.
Amiga CD32 riser adapter:
New version of my CD32 riser. This goes on the back of the cd32 and provide connection for VGA monitor (15khz), ps2 keyboard, 3.5mm audio output, and an aditional edge connector to plug an upgrade. This riser works great with the last RAM+IDE upgrade made by S. Leary, the TF328.
Price: 38€.
Purchase link, here: https://www.arananet.net/pedidos/product/cd32-riser-adapter-hefesto-light/
IdeLed A500:
This small pcb allows to use the floppy led of the Amiga 500 keyboard led and use it as hdd led too. For example if you want to see HDD activity of the vampire 500 or the Matze’s 68020tk this board will show the hdd activity.
Price: 7€.
Purchase link, here: https://www.arananet.net/pedidos/product/ideled-for-amiga-500/
Mnemósine500 Trapdoor expansion for Amiga 500:
Mnemósine500 is a little tiny trapdoor expansion board for the Amiga 500. It allows to add 512kb of chipram (512kb of fastram/low, depends on the system). Its just plug and play.
Price: 20€.
Purchase link, here: https://www.arananet.net/pedidos/product/mnemosine500-trapdoor-expansion-for-amiga-500/
RTC Battery kit:
RTC Battery kit is used to replace the common retro battery Ni-MH. This kit came with the battery holder, a diode to avoid charging the battery via the motherboard.
Price: 3,5€.
Purchase link, here: https://www.arananet.net/pedidos/product/rtc-battery-kit/
RTC clock for Amiga 1200 (or others with clockport)
This board allows to provide RTC on a standard Amiga 1200 via the clockport expansion port.
Price: 15€.
Purchase link, here: https://www.arananet.net/pedidos/product/rtc-clock-for-amiga-1200-or-others-with-clockport/
ScanLine Generator
The ScanLine Generator is little board that generates scanlines, replicating the appearance of older CRT monitors on modern, hi-resolution LCD/LED displays. You can see the pic gallery to see the effect.
Price: 16€.
Purchase link, here: https://www.arananet.net/pedidos/product/scanline-generator/
Ultimate Amiga RGB to VGA Adapter with RGB amplifier
This adapter allow to connect the RGB signal from the DB23 video connector of the Amiga to a VGA monitor or to an scandoubler.
Price: 18€.
Purchase link, here: https://www.arananet.net/pedidos/product/ultimate-amiga-rgb-to-vga-adapter-with-rgb-amplifier/
SDNET Adapter
This adapter allows to connect a Enc28j60 module to the Apollo’s Vampire Accelerator and offer ethernet connection. Also has a MicroSD connector so you can use the SD card too. Also includes a 3.3k resistor required to use with the Enc28j60 module. Due to the last core update, this sdnet adapter is for use on the V600, the V500 V2+ already include an expasion port for connect the enc module.
Price: 7,5€
Purchase link, here: https://www.arananet.net/pedidos/product/sdnet-adapter/
All the shipping goes via non tracked shipping. Worldwide. 2€.
Any question, please contact me via PM or at my email info at arananet dot net
Regards,
Edu.
Last edited: