Little brand new hardware for your amiga's

Status
Not open for further replies.

Arananet

Member
Rating - 100%
6   0   0
Joined
Oct 6, 2015
Posts
269
Country
Spain
Region
Madrid
Hi,

Instead of making 10 posts, I like to post here, some of my little projects that I have for sale.

Amiga CD32 riser adapter:

New version of my CD32 riser. This goes on the back of the cd32 and provide connection for VGA monitor (15khz), ps2 keyboard, 3.5mm audio output, and an aditional edge connector to plug an upgrade. This riser works great with the last RAM+IDE upgrade made by S. Leary, the TF328.


c4c3e76b-8d52-49ee-b707-e1f7b837121a.jpg

Price: 38€.

Purchase link, here: https://www.arananet.net/pedidos/product/cd32-riser-adapter-hefesto-light/

IdeLed A500:

This small pcb allows to use the floppy led of the Amiga 500 keyboard led and use it as hdd led too. For example if you want to see HDD activity of the vampire 500 or the Matze’s 68020tk this board will show the hdd activity.

20180212_222413.jpg

Price: 7€.

Purchase link, here: https://www.arananet.net/pedidos/product/ideled-for-amiga-500/


Mnemósine500 Trapdoor expansion for Amiga 500:

Mnemósine500 is a little tiny trapdoor expansion board for the Amiga 500. It allows to add 512kb of chipram (512kb of fastram/low, depends on the system). Its just plug and play.

DZZk64jXUAEEgjU1 (1).jpg

Price: 20€.

Purchase link, here: https://www.arananet.net/pedidos/product/mnemosine500-trapdoor-expansion-for-amiga-500/

RTC Battery kit:

RTC Battery kit is used to replace the common retro battery Ni-MH. This kit came with the battery holder, a diode to avoid charging the battery via the motherboard.

hk9h5fwwgagit2imslky.jpg

Price: 3,5€.

Purchase link, here: https://www.arananet.net/pedidos/product/rtc-battery-kit/

RTC clock for Amiga 1200 (or others with clockport)

This board allows to provide RTC on a standard Amiga 1200 via the clockport expansion port.

20180213_022030.jpg

Price: 15€.

Purchase link, here: https://www.arananet.net/pedidos/product/rtc-clock-for-amiga-1200-or-others-with-clockport/

ScanLine Generator

The ScanLine Generator is little board that generates scanlines, replicating the appearance of older CRT monitors on modern, hi-resolution LCD/LED displays. You can see the pic gallery to see the effect.

20180206_234459.jpg

Price: 16€.

Purchase link, here: https://www.arananet.net/pedidos/product/scanline-generator/

Ultimate Amiga RGB to VGA Adapter with RGB amplifier

This adapter allow to connect the RGB signal from the DB23 video connector of the Amiga to a VGA monitor or to an scandoubler.

DZZcPhbW0AIoxOH3.jpg

Price: 18€.

Purchase link, here: https://www.arananet.net/pedidos/product/ultimate-amiga-rgb-to-vga-adapter-with-rgb-amplifier/

SDNET Adapter

This adapter allows to connect a Enc28j60 module to the Apollo’s Vampire Accelerator and offer ethernet connection. Also has a MicroSD connector so you can use the SD card too. Also includes a 3.3k resistor required to use with the Enc28j60 module. Due to the last core update, this sdnet adapter is for use on the V600, the V500 V2+ already include an expasion port for connect the enc module.

23800054_10214708334564839_8562772321770459016_o.jpg

Price: 7,5€

Purchase link, here: https://www.arananet.net/pedidos/product/sdnet-adapter/

All the shipping goes via non tracked shipping. Worldwide. 2€.

Any question, please contact me via PM or at my email info at arananet dot net

Regards,
Edu.
 
Last edited:
There's a lot of interesting retro computer/console related things coming out of Spain lately, I'll bookmark your site for future reference.
 
I got SDnet adapter from you, thank you. Can you tell me if I can use both ethernet module and SD card in the same time?
 
IdeLed A500 is awesome. Ive purchased two of them so far. They work great.
Did you use it with a CF-IDE adapter? If so, then how? I don't have it with me here so I cannot check right now, but I believe I connected the wire to the DASP pin on the IDE port, but I do not see the case LED flashing. The SMD LED on the adapter is flashing as it should so the signal should be there.
 
I received my package last week and today I tried the Scan Line Generator with a 386DX pc that has an ISA VGA. It did not work and I assume it is because it's powered via the VGA connector? How can I make it work?
 
I received my package last week and today I tried the Scan Line Generator with a 386DX pc that has an ISA VGA. It did not work and I assume it is because it's powered via the VGA connector? How can I make it work?

Hi, Indeed. You monitor is the one that power the scanline. Pin 9 of the scanline must be supplied with 5V in order to work. the 80% of the monitors has this pin powered.

Regards,
Edu.

- - - Updated - - -

This is very easy to install, you use it as a sandwich between the a500 mobo and the keyboard.

a500 mobo > A500 ideled adapter > Keyboard. Then the left pin on the ideled adapter goes to the pin 39 of the cf adapter. After that your floppy led on the keyboard should work.

Regards
Edu.
 
I received my package last week and today I tried the Scan Line Generator with a 386DX pc that has an ISA VGA. It did not work and I assume it is because it's powered via the VGA connector? How can I make it work?

Hi, Indeed. You monitor is the one that power the scanline. Pin 9 of the scanline must be supplied with 5V in order to work. the 80% of the monitors has this pin powered.

Regards,
Edu.

It seems that it's not the monitor that needs to provide +5vdc but the vga card (makes sense)
Will have to do some modifications it seems - my goal was to use the old vga system on a lcd screen and have scanlines to make it more retro. No biggie I'll just add a +5vdc port or something :)
 
Looking forward to the Panther A600/1200 for my Vampire (when coming back to stock) and for the new clockport add-on for my A500+ Vampirized as well.
Great projects! N, sorry: amazingly cool projects!
All the best, mate.
 
Status
Not open for further replies.
Back
Top Bottom