Hi all, I have for sale this Amiga 600.
It comes as unit only
It has been recapped, RGB and composite out tested, RF untested. If the new owner wishes I can desolder the RF modulator before shipping.
Audio is working fine and is not crackly or problematic.
Unit is not original cream/white but is not yellowed either. Could probably do with a wipe down/clean though.
Has a dual 1.3-3.1 kickstart ROM which switch mounted to the back left corner underneath.
Original chinon floppy drive wouldn't read a disc and the eject didn't work properly so a Samsung pc drive converted for Amiga was put in. I had to cut some of the top shielding back to stop it fouling the case but this is internally and cannot be seen when the top case is on. I also had to cut the eject button and glue it back in position to fit the opening of the case. Drive is fully working and fits nice.
The HDD in pictures is not including (it's a 250mb and clunky) but I will leave the HDD bracket in if the new owner wishes.
The commodore Amiga 600 badge has started to lift off on the left edge and there is a crack to plastic around the floppy drive.
Looking for £100 plus shipping. I will be attending the Amibay meet up from the 4th-7th May so this can be collected in person there if wanted too
Sent from my ONEPLUS A3003 using Tapatalk
It comes as unit only
It has been recapped, RGB and composite out tested, RF untested. If the new owner wishes I can desolder the RF modulator before shipping.
Audio is working fine and is not crackly or problematic.
Unit is not original cream/white but is not yellowed either. Could probably do with a wipe down/clean though.
Has a dual 1.3-3.1 kickstart ROM which switch mounted to the back left corner underneath.
Original chinon floppy drive wouldn't read a disc and the eject didn't work properly so a Samsung pc drive converted for Amiga was put in. I had to cut some of the top shielding back to stop it fouling the case but this is internally and cannot be seen when the top case is on. I also had to cut the eject button and glue it back in position to fit the opening of the case. Drive is fully working and fits nice.
The HDD in pictures is not including (it's a 250mb and clunky) but I will leave the HDD bracket in if the new owner wishes.
The commodore Amiga 600 badge has started to lift off on the left edge and there is a crack to plastic around the floppy drive.
Looking for £100 plus shipping. I will be attending the Amibay meet up from the 4th-7th May so this can be collected in person there if wanted too
Sent from my ONEPLUS A3003 using Tapatalk
Last edited: