OK - so I have a few more of these ....
These are just the job for :-
Putting lots of stuff in a A500, A600, A1200 that needs a bigger PSU (like ATX etc.) - but you don't want to butcher the stock PSU.
Putting together a PSU for a machine with missing PSU, as in my own case
Repair a stock PSU.
Building a tower etc.
Price is £6.30 each + shipping - which is 79p in the UK, £2.65 to most of Europe.
First pic is the constituent bits , 2nd pic is assembled (but sleeve not pushed fully home)
I will ship as in 2nd pic with a litle bubble-wrap in a recycled jiffy bag.
The solder-side of the pins are hollow, so soldering is pretty easy (for a DIN plug).
I used some 4-core mains cable of similar guage to 5-amp 3-core .... this is a (very) tight fit in the strain-relief bush.
These are just the job for :-
Putting lots of stuff in a A500, A600, A1200 that needs a bigger PSU (like ATX etc.) - but you don't want to butcher the stock PSU.
Putting together a PSU for a machine with missing PSU, as in my own case
Repair a stock PSU.
Building a tower etc.
Price is £6.30 each + shipping - which is 79p in the UK, £2.65 to most of Europe.
First pic is the constituent bits , 2nd pic is assembled (but sleeve not pushed fully home)
I will ship as in 2nd pic with a litle bubble-wrap in a recycled jiffy bag.
The solder-side of the pins are hollow, so soldering is pretty easy (for a DIN plug).
I used some 4-core mains cable of similar guage to 5-amp 3-core .... this is a (very) tight fit in the strain-relief bush.