Sold Brand New Turbo Card HC533 33MHZ 8MB RAM IDE for Amiga 500

Status
Not open for further replies.
S

sordan

Member
Rating - 100%
42   0   0
Joined
Nov 21, 2011
Posts
163
Country
Ireland
Region
Dublin
1 pieces left till now.

Brand New Turbo Card HC533, MC68HC000 33MHz + Bootable IDE + 8MB Fast RAM for Amiga 500.

This turbo card will allow you to boot even from Workbench 1.3! You can boot your system from 1.3 or 3.1 Kickstart. You can boot between 2 ROMs (Oktapussy/Oktagon) and you can change this settings by using jumper on board (jumper included).

Processor MC68HC000 with 33 MHz clock, it will speed up your Amiga 500 a lot. Regarding to SysInfo V4.0 there is 3.51 MIPS (2.76 times faster than Amiga 1200 with 020 / 14 MHz)

There is 8MB Fast RAM included on board too.
There is 40 PIN IDE Male connector on board. You can connect CF to IDE adapter (IDE CF adapter included now as a gift) into that slot and you can boot your system from CF card (you dont need additional power for CF cards). You can also boot from real 40 PIN IDE hard drive but then you need to power your hardrive somehow.

Plug & Play turbo card. All you need to do is just remove MC68000 processor from your Amiga 500 motherboard (MC68000 processor module insterted is into slot on motherboard (you can easily remove it within seconds using for example flat screwdriver). No soldering at all.

Excellent IDE speed, regarding to SysInfo V4.0 our tested CF card as a hard drive speed was: 4.6MB/s! (IDE speed may be vary, depends which CF card are you using).

You can still use extra CHIP Ram from trapdoor expansion slot.
CF card from photos is not included.

Payment by Paypal or card only. No reservation.


Price: 127.95 EUR, included:
- Brand New HC533 Turbo Card
- Priority shipping worldwide (tracked + insurance for 150 EUR)
- Paypal fees.

 

Attachments

  • 2.jpg
    2.jpg
    193.8 KB · Views: 0
  • 3.jpg
    3.jpg
    194.1 KB · Views: 1
  • 603.jpg
    603.jpg
    34.6 KB · Views: 1
  • 5.jpg
    5.jpg
    194.6 KB · Views: 0
  • 7.jpg
    7.jpg
    197.3 KB · Views: 1
  • 9.jpg
    9.jpg
    204.7 KB · Views: 1
  • 10.jpg
    10.jpg
    201.5 KB · Views: 1
  • 14.jpg
    14.jpg
    189.5 KB · Views: 0
  • 13.jpg
    13.jpg
    184 KB · Views: 1
  • 12.jpg
    12.jpg
    193.7 KB · Views: 0
Last edited:
Sorry but this batch of 10 cards are sold now. I will let you know on this thread once I will get another batch of them. It should be within few weeks.
Thanks.
 
I'm interested in one but puzzled. There is ONE jumper on board labelled OKtapussy/Oktagon Rom. So that is actually a jumper for "onboard Rom or 3.1 Kickstart" instead? Need to know since the card blocks the Kickstart socket from fitting a switcher
 
We have another small batch of 10 cards available to buy now, ready to despatch on Friday (6th July). Unfortunate we do not have more IDE - CF adapters so there is no free gift this time. Thanks.

- - - Updated - - -

Methanoid: Hi there. There is no Amiga rom on this card. If you want to boot Workbech 3.0 or above you need to change your kickstart on your Amiga 500 motherboard or you can use Kickstart switcher and choose between 1.3/3.1. Thanks.
 
Last edited:
sordan said:
We have another small batch of 10 cards available to buy now, ready to despatch on Friday (6th July). Unfortunate we do not have more IDE - CF adapters so there is no free gift this time. Thanks.

- - - Updated - - -

Methanoid: Hi there. There is no Amiga rom on this card. If you want to boot Workbech 3.0 or above you need to change your kickstart on your Amiga 500 motherboard or you can use Kickstart switcher and choose between 1.3/3.1. Thanks.
Click to expand...
No gift :-( but your webnpage is awfully unclear on the ROMs. It implies it includes 3.1. It is hopeless in what it says re OKTA. :-(

Sent from my Redmi Note 4 using Tapatalk
 
And BBOAH is also confused.

http://www.bigbookofamigahardware.com/bboah/product.aspx?id=2058
Methanoid said:
sordan said:
We have another small batch of 10 cards available to buy now, ready to despatch on Friday (6th July). Unfortunate we do not have more IDE - CF adapters so there is no free gift this time. Thanks.

- - - Updated - - -

Methanoid: Hi there. There is no Amiga rom on this card. If you want to boot Workbech 3.0 or above you need to change your kickstart on your Amiga 500 motherboard or you can use Kickstart switcher and choose between 1.3/3.1. Thanks.
Click to expand...
No gift :-( but your webnpage is awfully unclear on the ROMs. It implies it includes 3.1. It is hopeless in what it says re OKTA. :-(

Sent from my Redmi Note 4 using Tapatalk
Click to expand...

Sent from my Redmi Note 4 using Tapatalk
 
Status
Not open for further replies.
Back
Top Bottom