Closed Megachip for A500, A2000, and CDTV (rj1307 project, Poland)

Status
Not open for further replies.
Declaring interest for one with PAL Agnus if they're available, or without Agnus if not. PM Sent.

EDIT: Changed request to PAL instead of NTSC.
 
Last edited:

Ok,
i 'm back after a small break, have built some units today,
will contact persons in queue with payment info

also updated the queue list
regards,

- Your 8 Bit dreams

 
Last edited:
Declaring interest one unit without fat agnus.

Ed. Withdraw in this moment. I will solve some questions.
 
Last edited:
Payment received from user Britlord for 1x with Agnus chip
will send parcel tomorrow
thank You for Your support!
regards,

Viktor
 
Registering interest in 2 please, no agnus required.
Ok, will add You to queue and PM with payment details as soon as Your Megachips are built and tested

User CRP
dropped his interest via PM
regards,

-8 Bit Dreams
 
Last edited:
Hi DjCook,

I am declaring interest in 3 Megachips without fat agnus,
regards,

HAL2000
 
Hi folks,
let's get back to work :)
will build some Megachips this weekend.
Meanwihe have spent some cash and got NTSC Aguns 8375 chip
done some tests with it and...what should i say.....IT JUST WORKS!

So now it is officially confirmed: this Megachip expansion works on both - PAL & NTSC systems!
 
Some questions:

1. Are the gerbers for this publicly available?

2. What about the schematics?

3. Why is it not compatible with genlocks?
 
Some questions:

1. Are the gerbers for this publicly available?

2. What about the schematics?

3. Why is it not compatible with genlocks?

Hi SukkoPera,
1. got Gerbers from Rafał Jankowski
2. He is actual designer, please ask him if You need them (may be contacted on www.ppa.pl via PM)
3. this board is small and there isn't space left for third glue logic chip,
Genlocks are not used normally hence this is something that can be cutted off without a problem

after a long break managed to find time and have built some new units,
will send payment info to users next in queue
thanks for Your patience,
best regards


-Viktor


 
Thanks a lot for the information. Going to try and come up with my own replacement then :).
 
Last edited:
Status
Not open for further replies.
Back
Top Bottom