Closed Megachip for A500, A2000, and CDTV (rj1307 project, Poland)

Status
Not open for further replies.
Still waiting on answer from user
HAL2000
he wasn't online, so will wait some days more before move to next person in queue..
 
I just want to chime in and confirm this works with Rev. 5 Amiga 500 motherboards.

Mine is an NTSC model, but I have since replaced the oscillator with a socket and PAL (28.37516Mhz) speed. This was not required for this to work, but since I could only source he PAL Agnus, I went with the complete PAL conversion.

156b849267b2fb4156c53404bbe042b1.jpg

f6146c1f608741a48e6c897b646bede8.jpg


All I had to do was jumper this unit as if it had 1mb CHIP.
e336331b1294ddd361aba6980f5f5896.jpg
8f54f1abb3422c28e08ede72b620d18d.jpg
 
Thank You very much Adrian!
I also got several reguests about A2000 Amigas.
Decided to upload a picture :
2018-12-31 00.16.07.jpg
Please don't take it as template, and ALWAYS check for A20 signal! (Pins may differ on other board revisions!!!)
 
Status
Not open for further replies.
Back
Top Bottom