Region free switchless supercic modded SNES for sale.
Has started to yellow on the front but not too badly. Supplied with official power cable, RF cable (would recommend getting an RGB scart) and 3rd party controller.
The original CIC lockout chip has been replaced with a supercic chip allowing games from all regions to be used. Please note US carts will work with the system but they do not physically fit and I'm not a case cutter. To use US carts you will need a pass through device such as a game genie or someone to cut the case.
Holding down the reset you can force video modes, green - forced 50hz, orange - auto (detects cartridge region and sets video frequency accordingly) and red - forced 60hz. Please note, while the majority of games will play fine in forced 60hz some games may exhibit graphical glitching. One such game is Super Mario World where playing the pal cart in 60hz will result in a flashing background. Running the NTSC cart in 60hz will work perfectly fine. This is not a problem with the console it's because the game is specifically coded for 50hz.
If you start a pal game in forced 60hz then it will start in 50hz to bypass any region checks then switch to 60hz after approx 10 seconds. Vice versa if starting an NTSC game in 50hz.
A quick press of the reset button will reset the console as standard.
No games are included in this sale, the ones in the pictures are to show it will play software from all regions and are my test carts.
Electronic test and burn in test both passed without issue using my repro test cart.
I think I've answered most questions but if you have any feel free to ask.
Also listed elsewhere.
Looking for £50 (was £65 then £55) delivered within the UK by PayPal gift or plus fees.
Sent from my ONEPLUS A3003 using Tapatalk
Has started to yellow on the front but not too badly. Supplied with official power cable, RF cable (would recommend getting an RGB scart) and 3rd party controller.
The original CIC lockout chip has been replaced with a supercic chip allowing games from all regions to be used. Please note US carts will work with the system but they do not physically fit and I'm not a case cutter. To use US carts you will need a pass through device such as a game genie or someone to cut the case.
Holding down the reset you can force video modes, green - forced 50hz, orange - auto (detects cartridge region and sets video frequency accordingly) and red - forced 60hz. Please note, while the majority of games will play fine in forced 60hz some games may exhibit graphical glitching. One such game is Super Mario World where playing the pal cart in 60hz will result in a flashing background. Running the NTSC cart in 60hz will work perfectly fine. This is not a problem with the console it's because the game is specifically coded for 50hz.
If you start a pal game in forced 60hz then it will start in 50hz to bypass any region checks then switch to 60hz after approx 10 seconds. Vice versa if starting an NTSC game in 50hz.
A quick press of the reset button will reset the console as standard.
No games are included in this sale, the ones in the pictures are to show it will play software from all regions and are my test carts.
Electronic test and burn in test both passed without issue using my repro test cart.
I think I've answered most questions but if you have any feel free to ask.
Also listed elsewhere.
Looking for £50 (was £65 then £55) delivered within the UK by PayPal gift or plus fees.
Sent from my ONEPLUS A3003 using Tapatalk
Last edited: