ReAmiga 1200 PCBs

Status
Not open for further replies.

chucky

Member
Rating - 100%
134   0   0
Joined
Jul 27, 2014
Posts
547
Country
Sweden
Region
Värmland
ADDED:

I have a new batch of ReAmiga 1200 Rev 1.5 PCBs..

new in 1.5 is : support for mousepcb that A1200 Rev 2 has.. (mouse PCB included now. with optional joysticktester function)

H and V sync is now buffered.
RGB output is via the buffered VGA output. so picture will not be darker is using 23 pin connector.
Composite output now allows optional SVideo connecor instead of RCA. so you can choose between havinhg either composite out or Svideo out.
added blinkenlights for RST, CIA, ROMEN and serial txd/rxd as option.
powerconnector for fans for 12V, 5V and now also 7V
Addded possability to have a jumper to defaulstart as PAL or NTSC.
Added pad for ESCOM floppymode. (no jumperwire needed)
Added pad for DRA0 pullup (instead of TH resistor) that commodore did on some boards (optional)

will hopefully be final version ever..

Anyway I allocate 5 each color here to Amibay (white or black)



new price. 45eur each plus shipping!

Will not be able to handle table here for lists. please write as a comment in this thread AND send me a PM!

---




now last batch came in!. 15xBlack, 15xWhite and 20xBlue
also for sale on other sites. White sold out

To order: SEND me a PM with interest and mention wanted color.

Pay me on paypal IN EUROS!! as friend or add 4% to cover fees.
and reply to me with address when done, you will get trackingno bacl



PCB price is 50eur. Shipping is 15euros tracked worldwide.
Black boards: AVAILABLE (all rev 1.2 even if picture here say other)

CHANGED Price to 50 from 60. also now I do not donate money from this project. aprox 800EUR donated total (in extra donations from people who made own boards and boardsales)

R1200-3.jpgR1200-4.jpgR1200-2.jpgR1200-1.jpg

BLUE boards: AVAILABLE AVAILABLE (all rev 1.2 even if picture here say other)
IMG_20180911_160215.jpgIMG_20180911_160149.jpgIMG_20180911_160204.jpg

WHITE Board: NOT AVAILABLE


IMG_0185.jpgIMG_0187.jpgIMG_0188.jpg


NOW Rev 1.2 (most likly last revchange for a long time. have other projects to do :)

Changes from Rev 1.1:
* Changed a timingissue with NSTC Composite out (and S-Video)
* Fixed support for VideoDAC that required Zenerdiode
* Added optional ROM Switch possability if you are using 27C800 Proms for kickstart.
* Solderblob you had to do on a pad close to alice is now replaced with a trace so blob not needed. (if you need to use another budgieconfig, trace can be cut and are visible)

NickBoardsAllocatedListPaymentSent
supaduper11XX
technotronic11XX
luddeprutt11XX
ordyne11XX
hvafalcon11XX
kirk_m11XX
fabius8111XX
a4kuse11XX
zybex1711XX
sveta11XX
roux11XX
l3rd11XX
bonefish22XX
tasdude601NO ANSWER
drwhy22XX
quaxar11XX
wonkeydonkey22XX
audun22XX
bobymiller11XX
smack2k1NO ANSWER
justme1411XX
Kronusofchaos1NO ANSWER
orcale_jedi22XX
jediknight1NO ANSWER
lowteq22XX
jd6411XX
eteP11XX
rhtorntn11XX
mattymuc22XX
witchmaster11XX
hlide11XX
joolz11XX
supaduper (again)11XX
yanlt6511XX
kegandog11
ishe11XX
viserys2311XX
skel2raw11XX
nodex11XX
gebes11XX
marenkey11XX
mattymuc22XX
retropanic11XX
multivac22XX
norduk11XX
0001agima11XX
pixel11XX
pezia11XX
omegamsx22XX
pixel11XX
dejavu4u211XX
amigo-mexicano11XX
mmj_uk11XX
 
Last edited:
all reserved now!

PLEASE follow instructions. and if you pay. do TELL me in PM or it will be hard to follow

putting up people on list for next run
 
Same boat as the few above me - seems far gone but interested just in case!
 
Status
Not open for further replies.
Back
Top Bottom