A500 / GBA1000 Clockport

Status
Not open for further replies.
Hi,

Would you have any items left? I'm interested.
Is there any way to get this also working with a GVP530 attached (so side connector occupied)?

Anyway interested though!
 
Hi,

Would you have any items left? I'm interested.
Is there any way to get this also working with a GVP530 attached (so side connector occupied)?

Anyway interested though!
Still have some units left, PM me if interested
 
A500 / GBA1000 Clockport

See post 51. He says it possibly works and asks who will test. A500 ports are just backwards a1000 ports. I dont know the risks of testing this expansion. I do know some a500 expansions work on an a1000 so maybe its fine?

Edit: these may have issues fitting too? Maybe not. They are angled up so maybe no room for subway?

Sent from my iPhone using Tapatalk
 
Last edited:
See post 51. He says it possibly works and asks who will test. A500 ports are just backwards a1000 ports. I dont know the risks of testing this expansion. I do know some a500 expansions work on an a1000 so maybe its fine?

Edit: these may have issues fitting too? Maybe not. They are angled up so maybe no room for subway?

Sent from my iPhone using Tapatalk



That's 100% correct!
This will not fit front expansion because it is designed for additional RAM, also pitch is 3.96mm instead of 2.54mm, however it will fit side connector if angled and not straight connector is used..
A1000 is basically same to A500 Zorro connector
2041cdf40872daf3ec5fae34ef2777af.jpg
 
Last edited:
Hi DjCook. If you some day make them in blue PCB I’ll declare interest for one... will look cool with my GBA1000... [emoji4]
Thanks for considering.
 
Hi DjCook. If you some day make them in blue PCB I’ll declare interest for one... will look cool with my GBA1000... [emoji4]
Thanks for considering.

Currently not planned, because there is not much interest in it.. in other hand - USB devices are quite expensive...

PS
By the way, can someone please recommend me an audio card for Clockport? Wanna test on one of my A500...
 
Last edited:
DjCook said:
Currently not planned, because there is not much interest in it.. in other hand - USB devices are quite expensive...

Understand that, no worry.

DjCook said:
PS
By the way, can someone please recommend me an audio card for Clockport? Wanna test on one of my A500...

I believe here on Amibay someone (Marmes?) was selling some Prelude replicas for the A1200 clockport, he might well still have one. Also the Prisma Megamix should work too but lacking development... and it is more or less only a MP3 playing board anyway.
 
Status
Not open for further replies.
Back
Top Bottom