A500 / GBA1000 Clockport

Status
Not open for further replies.

DjCook

8 Bit Dreams
Blogger
Rating - 100%
330   0   0
Joined
Apr 25, 2016
Posts
2,432
Country
Germany
Region
Bavaria

Hello dear Amibayers,
have some GBA1000/A500 Clockport Boards ready to go,
acts as a usuall A1200 Amiga Clockport,
You can use these with Subway or RapidRoad USB for example
2018-12-23 01.30.58.jpg 2018-12-23 01.30.26.jpg
IMG_0379.jpg IMG_0378.jpg
Please declare Your interest if needed

Asking 25€ paid using Friends/Family option
or by adding 4% PayPal fees if sent as payment

Shipping around the globe is 8.50€ tracked (5,50€ in Germany)
will combine shipping if more items are ordered

IMPORTANT !
Please be very carefull by installing Subway and RapidRoad USB's
don't want to scary You but take a look at this:
https://www.amibay.com/showthread.php?27748-Burn-Subway-Burn-(&highlight=subway
seems Commodore haven't specified correct numbering of the pins
manufacturers have no standard and are using different markings on the cable
(red wire is on opposite side!)
Subway - red wire schould be connected to pin 1 (marked on pcb)
http://www.e3b.de/usb/main_mounting_e.html
RapidRoad - red wire is connected to opposite side from pin 1 (marked on pcb)

PLEASE ALSO CHECK FOR SHORT CIRCUIT BEFORE TURING ON YOUR AMIGA!

You was warned, so do it at Your own risk!
don't want to hear "have broken my Subway / RapidRoad" with Your adapter...
so take care, and thanks for watching,

-Your 8 Bit Dreams

 
Last edited:
does this adapter also work with a vampire 500 v2 and for example a raidroad usb ?

Also interested to know if the Rapid Road has been tried / would work on this clock port? This time though, a GBA.
 
Does this work on both connectors of the GBA1000 or only the front or side? Do you have more than one available?
 
Does this work on both connectors of the GBA1000 or only the front or side? Do you have more than one available?

This works on the front side only.
One unit is sold to Sveta already, have 8 pcbs left

- - - Updated - - -

does this adapter also work with a vampire 500 v2 and for example a raidroad usb ?

Yes, works with Vampire card,
yes, works with RapidRoad

- - - Updated - - -

does this adapter also work with a vampire 500 v2 and for example a raidroad usb ?

Also interested to know if the Rapid Road has been tried / would work on this clock port? This time though, a GBA.

Rapidroad and all other devices work fine, there was an issue with pin one, as Subway and Rapidroad have marked pin1 differently (red wire is on opposite side!)
 
Last edited:
Ok, declaring interest for 1 please.

Not surprisingly I have a few things to do today, will PM later when I’m back
 
Also payment sent plus shipping address etc. by PM. As noted, PP says you will receive €31.50 as requested. If you do not then please just let me know how much extra is needed and I will send an additional top-up gift payment.

Happy Xmas.
 
Status
Not open for further replies.
Back
Top Bottom