Results 1 to 6 of 6

Thread: trouble updating the firmware...

  1. #1
    britlord's Avatar
    Join Date
    May 2013
    Country
    usa
    Region:
    Michigan
    Posts
    1,345
    Feedback
    46 (100%)

    Default trouble updating the firmware...

    I'm having trouble updating the firmware on my SCSI2SD v6 using scsi2sd-util6 update the feature... The error is "No DFU capable USB device available"....

  2. #2
    britlord's Avatar
    Join Date
    May 2013
    Country
    usa
    Region:
    Michigan
    Posts
    1,345
    Feedback
    46 (100%)

    Default

    This is the log:


    23:25:35: Load Complete.
    23:28:15: Searching for bootloader
    23:28:15: Resetting SCSI2SD into bootloader
    23:28:15: USB HID read failure: 0x1edb99ea900
    23:28:15: STM DFU Bootloader found
    23:28:15: Running: dfu-util --download "C:Program Files (x86)scsi2sd-util6firmware.dfu" --alt 0 --reset
    23:28:36: Firmware update failed
    23:28:42: Searching for bootloader
    23:28:42: STM DFU Bootloader found
    23:28:42: Running: dfu-util --download "C:Program Files (x86)scsi2sd-util6firmware.dfu" --alt 0 --reset
    23:28:55: Firmware update failed

  3. #3
    Retroid retroid's Avatar
    Join Date
    May 2018
    Country
    Australia
    Region:
    Victoria
    Posts
    1
    Feedback
    0

    Default

    Having the same issue as well with 2x V6s the dfu-util.exe scsi2sd-util6.exe and firmware.dfu are all in the same directory as per quci user guide running the prog as administrator.

  4. #4
    Amibayer! aperezbios's Avatar
    Join Date
    Jan 2009
    Country
    USA
    Region:
    Silicon Valley, San Francisco Bay Area, California
    Posts
    71
    Feedback
    1 (100%)

    Default

    Are you still stuck with this? You don't mention which OS you're using, but assuming it's Windows, it sounds like you may not have installed the SCSI2SD V6 driver. You can download it from http://www.codesrc.com/files/scsi2sd...indows/driver/ or, alternatively, you can use scsi2sd-util6 on a Mac or Linux, where this driver is not needed.

  5. #5
    DofD's Avatar
    Join Date
    Jun 2018
    Country
    Canada
    Region:
    BC
    Posts
    17
    Feedback
    0

    Default

    Updating my SCSI2SD V6's were a royal pain in the rear, even with the driver. But it can and does eventually work. It took me 6 different USB cables and trying 3 different USB ports on my Win 7 machine, but it did eventually work. The update to the latest firmware is worth the effort.

  6. #6
    A4000Bear's Avatar
    Join Date
    Jun 2011
    Country
    Australia
    Region:
    Victoria
    Posts
    56
    Feedback
    2 (100%)

    Default

    I have two SCSI2SD V6 boards. I updated one of them perfectly, the other fails, just like the original poster. I have no idea why, I would assume there is a fault, even though the board works fine otherwise.

Similar Threads

  1. Updating a kickstart rom
    By scrappysphinx in forum AmiOracle
    Replies: 11
    Last Post: 21st April 2018, 02:41
  2. Updating Amiga 2088 Bridgeboard Firmware
    By Storm in forum AmiOracle
    Replies: 5
    Last Post: 21st December 2017, 06:26
  3. Gotek firmware updating.
    By mjnurney in forum Photo Booth
    Replies: 5
    Last Post: 1st March 2014, 01:14
  4. updating 3.0 To 3.1
    By DonAmiga in forum AmiOracle
    Replies: 22
    Last Post: 12th May 2010, 13:30

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •