Page 1 of 9 12345 ... LastLast
Results 1 to 10 of 87

Thread: HDMI adapter for the Indivision AGA MK2cr, replacing RF modulator

  1. #1
    Ayley's Avatar
    Join Date
    Feb 2018
    Country
    England
    Region:
    Yorkshire
    Age
    36
    Posts
    19
    Feedback
    16 (100%)

    Default HDMI adapter replacing the RF Modulator (Compatible with ReAmiga) for the Indivision AGA MK2 and MK2cr

    I have for sale HDMI boards that fit into the location where the RF modulator normally lives. I have boards available for both the Indivision AGA MK2 and the Indivision MK2cr.

    For them to function correctly DVI or DVI+VGA needs to be set in Indivision prefs.

    I currently have:

    5 x HDMI adapters for the Indivision AGA MK2 (NOT the MK2cr). These won't work on a CD32 because I'm an idiot. They will function correctly but they get in the way of the shield during installation. I do have some coming that will work in the CD32 though, probably be here in about 2 weeks.

    6 x HDMI adapters for the Indivision AGA MK2cr. These do work in the CD32.

    I also have 8 x HDMI adapters for the ReAmiga boards that fit where the VGA connector on the ReAmiga board would go, these require either the Indivision AGA MK2 or the Indivision AGA MK2cr (I would need to know which is to be used since I have to solder them differently). But please note, some soldering is required in order to secure them enough to the ReAmiga board.

    Please note - This is my last run I think, I don't have enough parts to make up any more after the above have been sold and I don't think I'll be getting everything in to make some more. So once they've gone, they've gone. (Unless I can get a decent enough demand to justify making some more.)

    Pricing for the MK2cr version is 12 20 (See post #934090) for the adapter, ribbon cable and fixing screws excluding postage (see below).

    Pricing for the MK2 version is 17. Slightly cheaper as the cable that comes with the MK2 can be used so a new one is not needed.

    Pricing for the board for the ReAmiga is either 20 for the MK2cr variant or 17 for the MK2 variant.

    UK delivery is 3 for 1st class, 5 for 1st class signed for and 6 for Tracked24.
    European delivery is 5 for untracked, 10 for tracked.
    For worldwide delivery, PM me so I can check prices.

    Payment method is PayPal using friends+family option, or pay the relevant PayPal fee.

    Revision 1 (No longer for sale):

    Click image for larger version. 

Name:	IMG_20190309_171738.jpg 
Views:	11 
Size:	115.3 KB 
ID:	147427

    Revision 2 for the MK2cr:

    Click image for larger version. 

Name:	IMG_20190321_151144.jpg 
Views:	146 
Size:	84.5 KB 
ID:	145346Click image for larger version. 

Name:	IMGP0030.jpg 
Views:	113 
Size:	137.2 KB 
ID:	146130

    Revision for the MK2 (NOT the MK2cr)

    Click image for larger version. 

Name:	IMG_20190606_184327.jpg 
Views:	42 
Size:	53.9 KB 
ID:	147245

    (Ignore that it states MK2cr on it as well, I was toying which an idea which I decided to not go ahead with).

    Revision for the ReAmiga, supporting either MK2 or MK2cr:

    Click image for larger version. 

Name:	IMG_20190606_183135.jpg 
Views:	11 
Size:	39.5 KB 
ID:	147428

    I'm currently looking into the option of designing a 3d print (anyone with 3d printing experience?) that clips into the expansion bay that the adapter then screws into.

    Click image for larger version. 

Name:	IMG_20190423_133439.jpg 
Views:	134 
Size:	144.5 KB 
ID:	146129
    A (very messy ) photo of one in action

    I've also made use of the VGA part of the Indvision enabling a separate cable to be installed in the extension port giving you both HDMI and VGA options. If used at the same time you'll get some signal degradation due to the DVI+VGA settings in Indivision prefs and it will just clone the same display. It's mainly there as a backup incase you accidentally set the Indivision prefs option to VGA only, saving you having to open up the Amiga and replace the HDMI adapter with the original Indivision cable just to get a picture back. The VGA cable is an optional extra at 4 (considering the price increase in the regular board I decided to cut out any profit on this cable)

    I've now ran out of these cables and I don't plan on selling any more.

    Click image for larger version. 

Name:	IMG_20190413_133320.jpg 
Views:	94 
Size:	79.8 KB 
ID:	145870

    You'll also receive a link to an installation guide.

    Please be patient with me getting any posted out, I'm a mature student at University and sometimes my time gets severely limited. Not currently the case

    Sold to:
    2 sold to roc... payment received & shipped
    2 sold to jas.hook... payment received & shipped
    1 sold to elius1978... payment received & shipped
    alan.turner... shipped
    candyman... shipped
    Teavirus... shipped
    bobymiller... shipped
    a.mi.goun... shipped
    gebes... shipped
    golgotha... contacted, no response
    RetroPanic... shipped
    MannaTheBerserk... shipped
    Schuimpy... shipped
    Rapid_75... shipped
    ori1a... shipped
    swisstoni... no response
    Jolma... no response
    Akiko80... no response
    AussieTibbie... shipped
    mattymuc... interest withdrawn
    awmosoft... shipped
    Rakeim132... shipped
    rootboy... shipped
    74smoky... no response
    freelanzer... no response
    NoPyroNoParty... shipped
    Madlax... shipped
    whistling-ge... shipped
    Robin21... shipped
    Acill... shipped
    andrzejsliwa... shipped
    Stalex... shipped
    Styrbjorn... contacted
    yanlt65... shipped
    a4k060... contacted
    tanuki... shipped
    Last edited by Ayley; 20th June 2019 at 21:24.

  2. #2
    roc's Avatar
    Join Date
    Apr 2011
    Country
    Italy
    Region:
    EU
    Posts
    163
    Feedback
    33 (100%)

    Default

    Interested in two. Sending PM
    Last edited by roc; 9th March 2019 at 19:03. Reason: Asking two rather than one.

  3. #3
    jas.hook's Avatar
    Join Date
    Feb 2019
    Country
    United States
    Region:
    California
    Age
    48
    Posts
    33
    Feedback
    7 (100%)

    Default

    Interested, sending PM

  4. #4
    elius1978's Avatar
    Join Date
    Aug 2014
    Country
    Greece
    Region:
    Athens
    Age
    41
    Posts
    46
    Feedback
    9 (100%)

    Default

    Interested, sending PM

  5. #5
    alan.turner's Avatar
    Join Date
    Jun 2015
    Country
    UK
    Region:
    Guildford, Surrey
    Posts
    738
    Feedback
    103 (100%)

    Default

    Interested


    Sent from my iPhone using Tapatalk Pro
    Giggity..

  6. #6
    candyman's Avatar
    Join Date
    Jul 2009
    Country
    Italy
    Region:
    Lombardia
    Posts
    139
    Feedback
    10 (100%)

    Default

    Interested.

  7. #7
    elius1978's Avatar
    Join Date
    Aug 2014
    Country
    Greece
    Region:
    Athens
    Age
    41
    Posts
    46
    Feedback
    9 (100%)

    Default

    Payment sent for the fourth piece.

  8. #8
    TeaVirus's Avatar
    Join Date
    Dec 2016
    Country
    USA
    Region:
    Los Angeles, CA
    Posts
    19
    Feedback
    6 (100%)

    Default

    Interested in one

  9. #9
    gebes's Avatar
    Join Date
    Nov 2013
    Country
    United Kingdon
    Region:
    Edinburgh
    Posts
    74
    Feedback
    3 (100%)

    Default

    Interested in one , PM Incoming

  10. #10
    Pgovotsos's Avatar
    Join Date
    Nov 2015
    Country
    United States
    Region:
    WV
    Posts
    1,345
    Feedback
    60 (100%)

    Default

    I'm interested in 3 or 4. Looking at the list above me, it looks like I may have to go on the list for the next batch. Unless several people withdraw

    BTW is this compatible with Ratte's switch combining the output of an Indivision and RTG card to this board?

Page 1 of 9 12345 ... LastLast

Similar Threads

  1. Wanted Indivision MKII HDMI adapter Kipper2k
    By awmosoft in forum Amiga
    Replies: 0
    Last Post: 26th December 2017, 20:30
  2. Wanted Indivision MK2 HDMI Adapter
    By pogo in forum Amiga
    Replies: 0
    Last Post: 2nd June 2017, 07:37
  3. For Sale Indivision MKII HDMI adapter
    By kipper2k in forum Amiga
    Replies: 60
    Last Post: 17th April 2017, 00:20
  4. Replies: 3
    Last Post: 28th March 2015, 02:38
  5. Closed Adapter PCMCIA to CF, Adapter DVI to HDMI for Indivision AGA MK2
    By cocomocho in forum Sales Archive
    Replies: 17
    Last Post: 20th January 2013, 22:18

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •