For Sale KIT of Megachip for Amiga 500 / 2000 / CDTV 30€

Status
Not open for further replies.
Salve sono interessato. Sono disponibili?

- - - Updated - - -

Salve, sono interessato ... mi rispondi per favore?

- - - Updated - - -

Ciao sono interessato .. mi rispondi favore?
 
Last edited:
Sarei interessato

- - - Updated - - -

Hi,I would be very interested in buying it

- - - Updated - - -

Here is a complete KIT of Megachip (without AGNUS chip) for AMIGA 500, AMIGA 2000 and CDTV!

View attachment 146550 View attachment 146548 View attachment 146549

How it's look assembled?

View attachment 146552 View attachment 151006 View attachment 151005


Wire connexion:
View attachment 146551
In an Amiga 2000
View attachment 151384
In an Amiga 500



The schematic of this Megachip is the same as the one I make for the A500.
One the design of the PCB is different to be smaller and allowing an installation also in the A2000 & the CDTV.

As the one made for the A500, you'll have to desolder the PLCC socket of the Amiga motherboard and solder the Megachip at its place.


This kit includes:
- 1 x green PCB, (white pcb is the prototype produced at only 10 units.)
- 4 x network resistors,
- 6 x capacitors,
- 2 x RAM ICs,
- 1 x programmed GAL IC,
- 1 x 3M PLCC socket for the AGNUS chip,
- 4 x double row pins,
- 1 x wire.

You'll have to provide the AGNUS chip. If you don't own an AGNUS chip, you'll able to buy it from online Amiga shops.

Compatible AGNUS:

Agnus (2MB) 8375 R2 318069-10 A500+ (PAL), A600 (PAL)
Agnus (2MB) 8375 318069-11 A500+(NTSC) and A600(NTSC)
Agnus (2MB) 8375 390544-01 A500+ (PAL), A600 (PAL)
Agnus (2MB) 8375 390544-02 A500+ (NTSC), A600 (NTSC)


Available PCBs: 45

Amount for one complete KIT: 30€

If you want the Megachip assembled, I can assemble it for you. In that case, the amount is 40€ for the Megachip assembled, ultrasonic cleaned and tested.

Shipping cost with track number:
France : 2.16€ (for one kit)
Europe & World : 5.80€ (for one kit)

NameQuantityPaidSent on
Marco06 (France)1YES05/09/2019
ishe (Hungary)1YES05/10/2019
justme14 (Netherlands)1YES05/18/2019
jpa (Finland)1YES05/21/2019
nekonoko (USA)1 (Assembled)YES10/17/2019
johnnybarker (Scotland)1YESDon't remember the date,
but received and happy man!
Doublelefthander(Germany)1YES10/26/2019
ianjeffery (UK)1 (assembled)YES10/26/2019
Waldheimer (Germany)2YES10/22/2019
rainbowat (gb)1 (assembled)YES10/28/2019
justme14 (The Netherlands)1YES10/26/2019
CStich (USA)1
Roushi (Germany)1 (assembled)YES11/16/2019
marioska (Greece)2 (assembled)YES12/23/2020
ElAhrairah (Netherlands)1 (Kit)
Voyager_1701e (Australia)2 (Kit)YES
nikoskon74 (Australia)1 (Assembled) 1 (KIT)
Vaderqrt (Portugal)2 (Assembled)
Retroheaven87 (UK)1 (Kit)
Arnljot (Norway)1 (Assembled)
jasenr (USA)1 (Kit)
Haxxy (USA)1 (Assembled)
Nirsir121 (UK)1 (Kit)
turrican9 (Norway)1 (kit)
billy (Greece)1 (Assembled)
witchbone (Germany)1 (Assembled)
jochen (Germany)2 (Kit)
arielus26 (Argentina)2 (Kit)
oggie (Canada)2 (Kit)
henrycault (Canada)1 (Kit)
Ollis (Germany)1 (Kit)
tassadar (Australia)1 (Kit) 1(Assembled)
Bandaren (Sweden)4 (Kit)
viserys23 (Norway)2 (Kit) + network resistor
dir_marillion (Greece)2 (Assembled) To be confirmed

Hi,I would be very interested in buying it
 
Hi,I would be very interested in buying it

- - - Updated - - -

Hi,I would be very interested in buying it


So now diliby your next step is to Private message (PM) Tuxbar81 and let him know and hopefully he will add you to the list
 
Last edited:
Hi,
I am interested in one of this kit.

- - - Updated - - -

Hi,
I am interested in one of this kit.
 
Hi, I am interested in one of this kit.

So now diliby your next step is to Private message (PM) Tuxbar81 and let him know and hopefully he will add you to the list

So you have Declared interest, you no longer need to keep asking here, you need to Private Message him like I said before and wait for him to get back to you.
 
[FONT=Verdana,Arial,Tahoma,Calibri,Geneva,sans-serif]I am very interested in buying it. let me know?[/FONT]

- - - Updated - - -

[COLOR=rgba(0, 0, 0, 0.87)]hi, am I very interested in buying it?[/COLOR][COLOR=rgba(0, 0, 0, 0.87)] [/COLOR][COLOR=rgba(0, 0, 0, 0.87)]do you answer me?[/COLOR][COLOR=rgba(0, 0, 0, 0.87)] [/COLOR][COLOR=rgba(0, 0, 0, 0.87)]Yes or no?[/COLOR]​

- - - Updated - - -

[COLOR=rgba(0, 0, 0, 0.87)]hi, am I very interested in buying it?[/COLOR][COLOR=rgba(0, 0, 0, 0.87)] [/COLOR][COLOR=rgba(0, 0, 0, 0.87)]do you answer me?[/COLOR][COLOR=rgba(0, 0, 0, 0.87)] [/COLOR][COLOR=rgba(0, 0, 0, 0.87)]Yes or no?[/COLOR]​

- - - Updated - - -

Here is a complete KIT of Megachip (without AGNUS chip) for AMIGA 500, AMIGA 2000 and CDTV!

View attachment 146550 View attachment 146548 View attachment 146549

How it's look assembled?

View attachment 146552 View attachment 151006 View attachment 151005


Wire connexion:
View attachment 146551
In an Amiga 2000
View attachment 151384
In an Amiga 500



The schematic of this Megachip is the same as the one I make for the A500.
One the design of the PCB is different to be smaller and allowing an installation also in the A2000 & the CDTV.

As the one made for the A500, you'll have to desolder the PLCC socket of the Amiga motherboard and solder the Megachip at its place.


This kit includes:
- 1 x green PCB, (white pcb is the prototype produced at only 10 units.)
- 4 x network resistors,
- 6 x capacitors,
- 2 x RAM ICs,
- 1 x programmed GAL IC,
- 1 x 3M PLCC socket for the AGNUS chip,
- 4 x double row pins,
- 1 x wire.

You'll have to provide the AGNUS chip. If you don't own an AGNUS chip, you'll able to buy it from online Amiga shops.

Compatible AGNUS:

Agnus (2MB) 8375 R2 318069-10 A500+ (PAL), A600 (PAL)
Agnus (2MB) 8375 318069-11 A500+(NTSC) and A600(NTSC)
Agnus (2MB) 8375 390544-01 A500+ (PAL), A600 (PAL)
Agnus (2MB) 8375 390544-02 A500+ (NTSC), A600 (NTSC)


Available PCBs: 45

Amount for one complete KIT: 30€

If you want the Megachip assembled, I can assemble it for you. In that case, the amount is 40€ for the Megachip assembled, ultrasonic cleaned and tested.

Shipping cost with track number:
France : 2.16€ (for one kit)
Europe & World : 5.80€ (for one kit)

NameQuantityPaidSent on
Marco06 (France)1YES05/09/2019
ishe (Hungary)1YES05/10/2019
justme14 (Netherlands)1YES05/18/2019
jpa (Finland)1YES05/21/2019
nekonoko (USA)1 (Assembled)YES10/17/2019
johnnybarker (Scotland)1YESDon't remember the date,
but received and happy man!
Doublelefthander(Germany)1YES10/26/2019
ianjeffery (UK)1 (assembled)YES10/26/2019
Waldheimer (Germany)2YES10/22/2019
rainbowat (gb)1 (assembled)YES10/28/2019
justme14 (The Netherlands)1YES10/26/2019
CStich (USA)1
Roushi (Germany)1 (assembled)YES11/16/2019
marioska (Greece)2 (assembled)YES12/23/2020
ElAhrairah (Netherlands)1 (Kit)
Voyager_1701e (Australia)2 (Kit)YES
nikoskon74 (Australia)1 (Assembled) 1 (KIT)
Vaderqrt (Portugal)2 (Assembled)
Retroheaven87 (UK)1 (Kit)
Arnljot (Norway)1 (Assembled)
jasenr (USA)1 (Kit)
Haxxy (USA)1 (Assembled)
Nirsir121 (UK)1 (Kit)
turrican9 (Norway)1 (kit)
billy (Greece)1 (Assembled)
witchbone (Germany)1 (Assembled)
jochen (Germany)2 (Kit)
arielus26 (Argentina)2 (Kit)
oggie (Canada)2 (Kit)
henrycault (Canada)1 (Kit)
Ollis (Germany)1 (Kit)
tassadar (Australia)1 (Kit) 1(Assembled)
Bandaren (Sweden)4 (Kit)
viserys23 (Norway)2 (Kit) + network resistor
dir_marillion (Greece)2 (Assembled) To be confirmed

[COLOR=rgba(0, 0, 0, 0.87)]hi, am I very interested in buying it?[/COLOR][COLOR=rgba(0, 0, 0, 0.87)] [/COLOR][COLOR=rgba(0, 0, 0, 0.87)]do you answer me?[/COLOR][COLOR=rgba(0, 0, 0, 0.87)] [/COLOR][COLOR=rgba(0, 0, 0, 0.87)]Yes or no?[/COLOR]​

- - - Updated - - -

[COLOR=rgba(0, 0, 0, 0.87)]hi, am I very interested in buying it?[/COLOR][COLOR=rgba(0, 0, 0, 0.87)] [/COLOR][COLOR=rgba(0, 0, 0, 0.87)]do you answer me?[/COLOR][COLOR=rgba(0, 0, 0, 0.87)] [/COLOR][COLOR=rgba(0, 0, 0, 0.87)]Yes or no?

[/COLOR]​
 
If this project is still active. I am interested in one A2000 megachip kit with NTSC. With or without 2MB Agnus if available for USA. PM sent to Tuxbar81.
Thanks

P.S. Could a MOD delete my message on 6th June 2020, 11:26. I didn't see this being the most recent thread.
 
Tuxbar81, am I waiting in turn for a PM from you with deets, or are you waiting for a new PM from me if my initial was overlooked?

After a quick scan of the interests expressed, I have updated the table in the first post of the thread.

Glad to see I'm on the list. When I get a PM with amount and deets, I'll send you the payment.
 
Are these kits still available? If so, I would like one! PM inbound.

*EDIT*

Saw the new thread, will declare interest there.
 
Last edited:
Actually, I have ordered memories & CPLD. I'm waiting for them.
But you certainly know that the shipping duration is very long in this actual strange situation due to the COVID.

I'll check all posts and I'll update the table before the end of the week.
Please, remember that this version is sold as KIT or assembled and tested but always without the AGNUS chip.


:double

well I tried :LOL: diliby you are on your own


Hi Tim ! Thanks a lot for the hotline ! :) And for your patience ! :)

- - - Updated - - -

Tuxbar81, am I waiting in turn for a PM from you with deets, or are you waiting for a new PM from me if my initial was overlooked?

After a quick scan of the interests expressed, I have updated the table in the first post of the thread.

Glad to see I'm on the list. When I get a PM with amount and deets, I'll send you the payment.

I'll contact you as soon as your Megachip will be ready.
 
Last edited:
Tuxbar81,
If possible I'm in for 2 ea. NTSC. I have a A500 and A2000 now and would like to get 1 for each machine. New PM sent Thanks

If this project is still active. I am interested in one A2000 megachip kit with NTSC. With or without 2MB Agnus if available for USA. PM sent to Tuxbar81.
Thanks

P.S. Could a MOD delete my message on 6th June 2020, 11:26. I didn't see this being the most recent thread.
 
Interested in a kit if still available. Will PM info on confirmation.

Thanks!

Interest withdrawn. Sorry
 
Last edited:
Status
Not open for further replies.
Back
Top Bottom