jupo
New member
ALL ITEMS SOLD
Hi all, working on clearing out some old items that have been in storage for years. I'm hoping someone out there can get some use out of them!
3 Items listed below for sale:
(1) Microbotics Starboard: 2MB plus Multifunction board (RTC and FPU socket) for the A1000, with the A2000 adapter card. Tested working in an A2000. Battery removed (it's a AAA I think).
SOLD $50 plus shipping from Tucson, AZ (85757).
(2) Microway DEB 2000 adapter: this was an option for the AGA 2000 flickerfixer but should be compatible with others. It sits under the Denise chip and the slot attaches to the far side of the A2000's case, in line with the last ISA slot. This allows the flickerfixer to be used at the same time as a genlock or other card in the primary video slot. Untested, but had been working when last used, and pins look good.
This is just for the adapter, the flickerfixer is not included.
SOLD $5 plus shipping from Tucson, AZ (85757).
(3) Damaged DKB Insider: 1MB RAM card that sits under the 68000. One pin on the riser is broken, although the way the riser is designed it has a socket seated in a socket for extra height clearance - you should be able to just replace the lower socket instead of trying to repair the broken pin. The jumper wires have also broken from the solder points and are not present. Because of this, it is untested and sold as-is.
SOLD Free for shipping from Tucson, AZ (85757).
Hi all, working on clearing out some old items that have been in storage for years. I'm hoping someone out there can get some use out of them!
3 Items listed below for sale:
(1) Microbotics Starboard: 2MB plus Multifunction board (RTC and FPU socket) for the A1000, with the A2000 adapter card. Tested working in an A2000. Battery removed (it's a AAA I think).
SOLD $50 plus shipping from Tucson, AZ (85757).
(2) Microway DEB 2000 adapter: this was an option for the AGA 2000 flickerfixer but should be compatible with others. It sits under the Denise chip and the slot attaches to the far side of the A2000's case, in line with the last ISA slot. This allows the flickerfixer to be used at the same time as a genlock or other card in the primary video slot. Untested, but had been working when last used, and pins look good.
This is just for the adapter, the flickerfixer is not included.
SOLD $5 plus shipping from Tucson, AZ (85757).
(3) Damaged DKB Insider: 1MB RAM card that sits under the 68000. One pin on the riser is broken, although the way the riser is designed it has a socket seated in a socket for extra height clearance - you should be able to just replace the lower socket instead of trying to repair the broken pin. The jumper wires have also broken from the solder points and are not present. Because of this, it is untested and sold as-is.
SOLD Free for shipping from Tucson, AZ (85757).
Last edited: