stachu100
Active member
Hi,
For sale CSPPC rev1 by phase5 with following upgrades and accessories:
1) MC68060RC50 Motorola overclocked to 60MHz
2) 604e@400MHz slightly overclocked to 420MHz
3) 128MB RAM installed
4) New fan on PPC CPU
5) 72GB 80pin SCSI HDD with AOS3.9 installed (KS3.1 required)
6) Original AOS3.9 CD-ROM - warranty seal intact
7) SCSI cable with two active terminators at the ends and 80-68pin adapter for SCSI HDD
8 ) Two plastic supports
I'm asking 2150EUR for this set, money sent by PayPal as "gift" or standard PayPal payment with 4% extra on top to cover PayPal fees.
Price includes worldwide postage with tracking and with tracking and insurance.
Other currencies are possible.
It is possible to exclude AOS3.9 CD-ROM if you will provide the picture that you owe this CD-ROM already.
CyberVision PPC shown on video is not the part of the deal.
Also listed elsewhere.
Pictures and video:
https://photos.app.goo.gl/3ApKUfUzMfqNxnPQ6
I would recommend to recap A4000 mobo and PSU plus soldering Super Buster directly to PCB - just standard actions that should be done to ensure stable work of whole system.
Don't forget to have good ventilation too.
And of course please make sure to put clock jumpers on A4000 mobo into EXT positions.
For sale CSPPC rev1 by phase5 with following upgrades and accessories:
1) MC68060RC50 Motorola overclocked to 60MHz
2) 604e@400MHz slightly overclocked to 420MHz
3) 128MB RAM installed
4) New fan on PPC CPU
5) 72GB 80pin SCSI HDD with AOS3.9 installed (KS3.1 required)
6) Original AOS3.9 CD-ROM - warranty seal intact
7) SCSI cable with two active terminators at the ends and 80-68pin adapter for SCSI HDD
8 ) Two plastic supports
I'm asking 2150EUR for this set, money sent by PayPal as "gift" or standard PayPal payment with 4% extra on top to cover PayPal fees.
Price includes worldwide postage with tracking and with tracking and insurance.
Other currencies are possible.
It is possible to exclude AOS3.9 CD-ROM if you will provide the picture that you owe this CD-ROM already.
CyberVision PPC shown on video is not the part of the deal.
Also listed elsewhere.
Pictures and video:
https://photos.app.goo.gl/3ApKUfUzMfqNxnPQ6
I would recommend to recap A4000 mobo and PSU plus soldering Super Buster directly to PCB - just standard actions that should be done to ensure stable work of whole system.
Don't forget to have good ventilation too.
And of course please make sure to put clock jumpers on A4000 mobo into EXT positions.
Attachments
Last edited: