Sold WarpEngine 4040 + 060 rev6@80MHz and KS3.9 1MB for A4000D with Ak4 ROMy adapter and SCSI HDD 72.8 GB + SCSI cable

Status
Not open for further replies.

stachu100

Active member
Rating - 100%
385   0   1
Joined
Aug 31, 2009
Posts
2,908
Country
Poland
Region
mazowieckie
@Miru is first in line in this thread as agreed via PM.

For Sale WarpEngine 4040 with 040-060 adapter and 060 rev6 working at 80MHz + 128MB of FAST RAM.
Also in the bundle SCSI HDD 72,8GB (69 after format) 80 pin with 80-68 pin converter + SCSI cable with active terminator.

And assuming that buyer will proof that she/he poses legal AOS3.9 CD-ROM:
- Custom KS3.9 1MB with A4K ROMy module
- WB3.9 on booting partition configured for A4000D

Asking round 1000EUR sent by PayPal as "gift" or buyer pays 4% extra on top to cover PayPal fees.
Including postage worldwide.
I can accept other curriency as well.

A pictures with WarpEngine + 040-060 adapter with 060 will be added later.
 

Attachments

  • WE-5.jpg
    WE-5.jpg
    106.9 KB · Views: 2
  • WE-4.jpg
    WE-4.jpg
    50.6 KB · Views: 2
  • WE-3.jpg
    WE-3.jpg
    201 KB · Views: 1
  • WE-2.jpg
    WE-2.jpg
    190.6 KB · Views: 2
  • WE-1.jpg
    WE-1.jpg
    196.2 KB · Views: 2
Thanks Stachu100, awaiting video if it in action, then will send you the funds as agreed. Nice christmas gift for the 4000D :)
 
Money sent !
Hi,

Payment refunded, because it was sent as standard PayPal payment.
And PayPal took 50EUR... :-(

If you wish to use standard payment no problem, but please pay 1050EUR (looks like PayPal is charging 5% instead of 4%).
 
Paypal is crazy.

Ok sent money again, you should have received the full 1000 Euro now.

looking forward to everything, address sent to you

Miru
 
Tested unfortunately not working, question sent. Does the warpengine and a picasso 4 not work together?
 
Last edited:
PM answered,
If you have reboot cycles, it means that CPU is working for sure.
So I'm 100% sure card is fine.
Please go with procedure I have sent or test on another A4000D.
 
It seems the warpengine doesnt like the picasso iv or vice versa. Weird as the csppc and csmki had no beef with the current config. But without picasso iv it works.

Anyone got any suggestions? Its a buster 11 a4000d
 
Hi Miru

Are there any other Zorro cards fitted?

any other amiga user friends near you with a 4000 you can try it in?

Does the Picasso IV have any other addons attached to it like the Concierto IV
 
Last edited:
I've had WE040 and PicassoIV working together fine, probably the compatibility issue is introduced by the 060 adapter?
 
I also have a Warp Engine 4040 with 060 adapter running a rev6 68060 @50mhz running flawlessly with a Picasso IV board.
 
Hi Miru,


I was having WarpEngine 4040 with Picasso IV in the past - no issues whatsoever.

So there are two options:
There are some incompatibility issues between all components due to Custom KS3.9 (I'm unable to test all configs possible, sorry)
There is something wrong with A4000D (or daughter board).
 
I've had WE040 and PicassoIV working together fine, probably the compatibility issue is introduced by the 060 adapter?

My WE040 and PicassoIV work perfectly together as well.
 
Status
Not open for further replies.
Back
Top Bottom