Pi1541 is a real-time, cycle exact, Commodore 1541 disk drive emulator that runs on a wide range of Raspberry Pi:s.
The Pi1541 Pico Edition is a compact Pi1541 hat board designed for the inexpensive Raspberry Pi Zero.
The board is about half the size of a regular PI1541 hat but has a user friendly layout and is packed with features thanks to surface mounted components. Each board is hand built with high quality components and tested before shipping.
Availability: 0 board(s)
Features:
* Single IEC port
* Option B (buffered serial signal for use with other devices in daisy chain)
* Power and activity LEDs
* OLED display header (fits/supports 0.96" 128x64 or 0.91" 128x32 that runs on 5V)
* 1× OLED 0.91" 128x32 white text display INCLUDED
* Six tactile buttons (5× menu + 1× reset)
* Piezo buzzer (NOT yet supported by the current version, v1.23, of the PI1541 software for RPI Zero)
* Plastic spacers/supports for the hat and the RPI are included
The Raspberry Pi Zero is NOT included!
The SRQ signal is NOT connected (used by C128 and 1571/1581 diskdrives)
The PI1541 is created by Steve White and, as a token of appreciation for his hard work, I will donate 10% of the proceeds to him. Read more about the project on www.pi1541.com. If you're using the PI1541 software on a regular basis and want to support further development, please consider making a donation.
I will send you a link to a file archive, for easy setup, after purchase.
If you need a 40-pin (2x20p) male header for the Raspberry Zero, I'll include one for free.
Fast shipping from within the EU!
WITH OLED display: €31.5
WITHOUT OLED display: €26
International tracked shipping: €10
Payment as gift/friend to PayPal
The Pi1541 Pico Edition is a compact Pi1541 hat board designed for the inexpensive Raspberry Pi Zero.
The board is about half the size of a regular PI1541 hat but has a user friendly layout and is packed with features thanks to surface mounted components. Each board is hand built with high quality components and tested before shipping.
Availability: 0 board(s)
Features:
* Single IEC port
* Option B (buffered serial signal for use with other devices in daisy chain)
* Power and activity LEDs
* OLED display header (fits/supports 0.96" 128x64 or 0.91" 128x32 that runs on 5V)
* 1× OLED 0.91" 128x32 white text display INCLUDED
* Six tactile buttons (5× menu + 1× reset)
* Piezo buzzer (NOT yet supported by the current version, v1.23, of the PI1541 software for RPI Zero)
* Plastic spacers/supports for the hat and the RPI are included
The Raspberry Pi Zero is NOT included!
The SRQ signal is NOT connected (used by C128 and 1571/1581 diskdrives)
The PI1541 is created by Steve White and, as a token of appreciation for his hard work, I will donate 10% of the proceeds to him. Read more about the project on www.pi1541.com. If you're using the PI1541 software on a regular basis and want to support further development, please consider making a donation.
I will send you a link to a file archive, for easy setup, after purchase.
If you need a 40-pin (2x20p) male header for the Raspberry Zero, I'll include one for free.
Fast shipping from within the EU!
WITH OLED display: €31.5
WITHOUT OLED display: €26
International tracked shipping: €10
Payment as gift/friend to PayPal
Last edited: