Motherboards 286 to pentium

Status
Not open for further replies.

Sunaiac

Member
Rating - 100%
29   0   0
Joined
Sep 12, 2013
Posts
227
Country
France
Region
Paris
Hello,

I have for sale or swap the following motherboards. Currently looking for a Voodoo 5 agp, a XP55T2P4, MVS games.
Unless stated otherwise, they have all been tested to boot from an ISA controller with a 2GB CF, after autodetect in BIOS. Doom has been run when possible, else ran tests are mentioned in description.
Unless stated otherwise, the battery has been removed from the board after testing (but may still appear on the pictures) (was starting to leak/already leaking)
20200423_095546.jpg

Price will go down if several boards are bought. (Three MB bought : -50% on cheapest, Four MB bought : Free for the cheapest, More : ask)
I am open to offers.
Shipping prices : https://www.laposte.fr/tarif-colissimo
One board is 600-700grs, I can pack it for 1kg, which gives the following prices :
- France : 9.95€ with insurance
- Most of Europe : 15.50€
- World : 27.65€

- M219 286 Motherboard, Harris 25MHz CPU, 40MHz quartz, with 4MB of memory. Since it can't run doom, tested 3Dbench (3.6) and TOPBENCH (25) 40€ (Sold to Whisper)
- Boxed QD-U386DX 1.0, AMD 386DX-33, cache, with 4MB memory. I don't remember being able to go beyond BIOS on this one because the battery was dead so it couldn't save HDD setup. 40€ (Sold to MMaximus)
- M321 REV 3.1, AMD 386DX-40, cache. Speedsys 9.36, Doom 10513 ticks. 40€ (Sold to c0burn)
- 486SLE M106 (SIS85C471), cache, speedsys 24.92, Doom 2625, Quake 7.7 (DX2-66, ET4000W32p VLB), 35€ -> 30€ (Sold to Madowax686)

- VL486 1.0 (UMC 482AF), cache, speedsys 25.02, Doom 2786, Quake 7.0 (DX2-66, ET4000W32p VLB), 30€ -> 25 -> 20 € (Sold to carsten )
- AMI Super Voyager PCI-II, cache, speedsys 25.0, Doom 3152 (DX2 66, Ati Mach64 PCI), 40€ -> 35€ -> 30€ (Sold to carsten)
- MB1433/50/UIV-A Rev 5 (UMC498F), cache, Speedsys 25.03, Doom 2517, Quake 8.2 (DX2 66, ET4000W32p), one of the very best 486 boards ! 45€ (Sold to CHiLL72)
- MB1433/50/UIV-A Rev 6 (UMC498F), cache, Speedsys 25.03, Doom 2506, Quake 8.2 (DX2 66, ET4000W32p), one of the very best 486 boards ! 40€ ( Sold to dejavu4u2)
- Shuttle HOT 433 4.0, cache, I used this board like 8 years ago, but now it stopped working, Dead RTC ? 35€ -> 30€ -> 25€ ( Sold to veetya)


- BCM 1.1, no cache, did not start (dead RTC ?), 15€ -> 10€
- OPTI 495SLC 1.1 hybrid 386/486 VLB, cache 8MB RAM, TX486DLC-33 CPU, Speedsys 17.48, Doom 7072 (ET4000W32p VLB), 100€ -> 90€ -> 85€
- Dell Socket 4 batman BIOS A08 (No RTC, tested with a working RTC, its a socket) 50€ -> 45€ -> 35€

The three remaining boards for 100€ !

20200714_122949.jpg
 

Attachments

  • 20200714_122812.jpg
    20200714_122812.jpg
    178.3 KB · Views: 1
Last edited:
- Dell Socket 4 batman BIOS A08 (No RTC, tested with a working RTC, its a socket) 50€ -> 45€ -> 35€
This is a very annoying motherboard. First, it did not start with a S3 Virge, had to put a Mach64 to finaly have something on screen.
then, had troubles reaching DOS, like I had to press F1 when it said to press F2 to go to BIOS or something like that.
It has apparently already been repaired, wether its by a user or from factory I do not know.
20200714_135751.jpg20200417_152546.jpg
 

Attachments

  • 20200714_135608.jpg
    20200714_135608.jpg
    153.9 KB · Views: 0
  • 20200714_135720.jpg
    20200714_135720.jpg
    129.1 KB · Views: 0
Last edited:
declaring interest in QD-U386DX if you can confirm it has an external battery header (I believe it does from the photo but it's difficult to see)
 
:interested: in M219 286 Motherboard, Harris 25MHz CPU, 40MHz quartz, with 4MB of memory


PM sent
 
declaring interest in QD-U386DX if you can confirm it has an external battery header (I believe it does from the photo but it's difficult to see)

Hi,

here are some pictures I took this morning. It should answer your questions. I don't have the manual, but I guess J1 is what you want.
Note that I had to leave a little part of the battery leg in, I have not been able to remove it easily and got afraid of damaging stuff. Highlighted in red.

20200715_094004.jpg20200715_094013.jpg20200715_094032.jpg20200715_094048.jpg20200715_094056.jpg20200715_094117.jpg20200715_094125.jpg20200715_094140.jpg
 
:interested: in M219 286 Motherboard, Harris 25MHz CPU, 40MHz quartz, with 4MB of memory


PM sent


Pics of the board :
20200715_100200 (1).jpg20200715_100209 (1).jpg20200715_100221 (1).jpg

Everyone, for shipping prices :
Shipping prices : https://www.laposte.fr/tarif-colissimo
One board is 600-700grs, I can pack it for 1kg, which gives the following prices :
- France : 9.95€ with insurance
- Most of Europe : 15.50€
- World : 27.65€
 
Last edited:
M321 received a few days back but only just got around to unpacking and testing. All good and really nice board... Fast and stable. :)
 
Status
Not open for further replies.
Back
Top Bottom