Selling four joysticks and one mouse

Status
Not open for further replies.

bkodenkt

Member
Rating - 100%
30   0   0
Joined
Dec 1, 2017
Posts
225
Country
Deutschland
Region
Bremen
I am selling four joysticks and one mouse with DB9 connectors for the Amiga and other systems of that era. They are all in working condition and have been cleaned thoroughly, thus looking quite good now. All have been repaired at some point to varying extent, please read the detailed descriptions carefully.


1x Competition Pro (black case, red stick and buttons). The microswitches of the fire buttons have been replaced and some solder-points had to be reworked. One of the microswitch-holders was broken and had to be treated with glue. Works good and has satisfying "click-feedback" on all the buttons and directions. One dent in the case on the right rear corner. 15 Euro.
IMG_20200916_182127.jpgIMG_20200916_182112.jpg


1x Cheetah Exterminator (black case, orange buttons). The stick-plate that pushes the contacts down was broken and had to be glued and reinforced. I chose a thin plate of wood (!). The stick now works again but is really "stiff" and does not give much feedback anymore. 5 Euro.
IMG_20200916_181748.jpgIMG_20200916_181729.jpg


1x Quickjoy QJ I SV-121 (black case, red buttons). The contact plates (spring-type) were dirty and have been cleaned and treated with sand paper. It works good and has satisfying "click-feedback" now. 10 Euro.
IMG_20200916_181646.jpgIMG_20200916_181709.jpg


1x Quickjoy QJ II SV-122 (black case, red buttons). All contacts have been cleaned and threated with sandpaper. Works good, but the stick does not really give satisfying feedback for directions movement. The contact ring that gets pushed down by the stick is rather flimsy. It works but my guess is that it needs replacement if you plan to use the joystick on a regular basis. 5 Euro.
IMG_20200916_181932.jpgIMG_20200916_181827.jpg


1x Datalux SV-704 mouse. The microswitches for the mouse buttons have been replaced and now once again give perfect "click-feedback". Works good. It is clean and the "datalux" print is in good condition, so I decided to skip retrobrighting for now. The new owner might consider retrobrighting the case and sanding down the microswitches in order to make clicking easier, though. 10 Euro.
IMG_20200916_182046.jpgIMG_20200916_182053.jpg


Shipping is excluded on all prices mentioned above, so please ask for shipping costs (tracked and insured only) to your destination. I only accept Paypal, and if you choose not to pay via the friends&family option please be pepared to cover transaction fees as well.
 
Status
Not open for further replies.
Back
Top Bottom