Well, i did a little "inspection" and PMS on two of my A1000s, and thought i'd take some pics on the way. I believe some of you A1k vets will find it handy in a way..
Here's the tags on the psu's
First the NTSC 110V model:
Next up the PAL 240V one:
The NTSC board power LED cable
The PAL board power LED cable
Next four pics are of the floppy spacers that mount the drive. Common to both NTSC and PAL..
Here's the NTSC floppy LED cable:
And the PAL equivalent:
Finally, floppy with belly up, shows the LED cable coming out of the drive, and you can see the height is not what you'd call full-height, but actually "double-height"
Hope this was usefull, as i've seen people asking about cables and floppies in the past..
Here's the tags on the psu's
First the NTSC 110V model:
Next up the PAL 240V one:
The NTSC board power LED cable
The PAL board power LED cable
Next four pics are of the floppy spacers that mount the drive. Common to both NTSC and PAL..
Here's the NTSC floppy LED cable:
And the PAL equivalent:
Finally, floppy with belly up, shows the LED cable coming out of the drive, and you can see the height is not what you'd call full-height, but actually "double-height"
Hope this was usefull, as i've seen people asking about cables and floppies in the past..