Closed Amiga 4000 suitable MicroATX PSU + ATX to Amiga 4000 adapter

Status
Not open for further replies.

Hanzu

Member
Rating - 100%
11   0   0
Joined
Sep 7, 2011
Posts
51
Country
Finland
Region
Tampere
Amiga 4000 MicroATX PSU + ATX to Amiga 4000 adapter made my Amigamaniac

This microATX PSU fits Amiga 4000 original desktop case and used two upper screw holes. It powers my big Mediator and lots of cards and mass media without problems.

A%20%281%29.JPG


Read more and see my pictures and notes about the install and how it looks inside A4000D:
http://relay.pp.fi/Amiga/A4000/A4000DATXPSU/index.html

There is a switch behind the PSU, so no need to the original A4000 PSU power switch mechanism. Even though it is possible to install additional switch in the end of that mechanism to switch this one on too.

I sell this only because I went to build my system to big tower case to have space for biggest Mediator and 6 floppy drives.

Price is 30 euros.
Payment by Paypal
Shipping is 20,50 / 25,50 / 35 / 36 euros depending where you are at - just ask about it.
 
Last edited:
Six floppy drives ?! :)

Yes. :) DF0: and DF1: as usual, DF2: and DF3: stripped out of their top case and installed to 3.5" to 5.25" converters. 5th and 6th are 3.5" and 5.25" floppies connected to Catweasel MK2 Anniversary Edition. I could still connect C64 drive to PARALLEL port, but that would be external when all those 6 ase internal now.

This trick of mine requires a tower case of ten 5.25" slots.
 
Status
Not open for further replies.
Back
Top Bottom