Automatic Kickstart Switcher for Amiga 1000 [PERFECT WORKING]

[Tuxbar81]

How do you fit this?

If I understand well, you want to know how to connect the adapter onto the moterboard?
For example, onto a motherboard with piggyboard, you have to remove ODD & EVEN ICs.
The adapter is inserted into the sockets of the two ICs.
It was the meaning of your question?

- - - Updated - - -

I have begun to write an installation manual in French & English with photos of each step of the installation.
The manual will be available in PDF file.

[Tajmaster]

How do you fit this?

If I understand well, you want to know how to connect the adapter onto the moterboard?
For example, onto a motherboard with piggyboard, you have to remove ODD & EVEN ICs.
The adapter is inserted into the sockets of the two ICs.
It was the meaning of your question?

- - - Updated - - -

I have begun to write an installation manual in French & English with photos of each step of the installation.
The manual will be available in PDF file.

Hi

Yes thats what Im asking, how to fit to the motherboard

[CUF85]

Interested in one without led!

[L3rd]

Interested in two boards with led, PM already sent,


Inviato dal mio iPhone utilizzando Tapatalk

[Tuxbar81]

It's to speak about money!
I have looked for the production' price of the PCB. Actually, there is actually 15 PCBs asked (for the KS Switcher).
For this number of PCB, the price of the production will be 9€ per board.
To obtain a lower price, we'll need a minimum of 21 PCBs. (5,15€ per board)

The PCB of the LED module is really small, the price should be normally 3€.
I'm going to contact the PCB factory to have confirmation about prices.

So, if you have declared your interest, please, confirm by PM and say me if you want also the LED module or not.
If you have an Amiga 1000 and if you haven't yet declared your interest, it's perhaps the good time to offer a beautifull gift!
As I said, more we will be, lower will be the price!

[DutchinUSA]

I will take another 2, so a total of 3, 2 without LED board, 1 with LED board .. hope that helps us get to 21 !

[Tuxbar81]

Just to show how is the LED module. The idea is to replace the power LED by the LED module.
The front case requires modification to allow the introduction of LED module as picture shows.
The LEDs will be flat and not cylindrical as illustrated into picture of PCB.

What do you think about this idea?

[amiman99]

Will this board be for sale as:
1. Fully assembled ,
2. full kit, or
3. PCB only?

[Beska]

Put me down for 1 with an led.


Sent from my iPad using Tapatalk HD

[croupier]

Nice!

Pls increase my order to 2 boards (1 with led)....maybe an idea to keep the costs of PCB production low (as if they are high now.....)....could you design the production board with both circuit boards on the same 'board' with some perforation in between the two circuits so that the user will be able just to cut/saw or break the board in two and have two boards (kickstart and led)....for the producer it will run as a single board production.......just an idea....