Page 1 of 87 123451151 ... LastLast
Results 1 to 10 of 867

Thread: A500 IDE adapters, PS/2 mouse adapter, A600 CF adapter

  1. #1
    mkl's Avatar
    Join Date
    Jan 2009
    Country
    Finland
    Region:
    Tampere
    Posts
    284
    Feedback
    107 (100%)

    Default A500 IDE interface which plugs to the 68000 cpu socket

    Boards usually supplied without documents. For online information (about kickstart and needed wiring for A500,1000,2000, CDTV) see http://www.mkl211015.altervista.org/ide/ide68k.html

    "Stock"
    1 v298 cfidecp - 70€ with 68hc000 low power cpu
    Click image for larger version. 

Name:	IMG_20190311_073509_crop_961x347.jpg 
Views:	209 
Size:	43.5 KB 
ID:	144828


    Soldered combination v425 ide+ 8MB (low profile for a500, cdtv, others) cpu plugged in 85€, no cpu -3€:
    . 1 piece with right angle walled connector.
    Click image for larger version. 

Name:	IMG_20191226_151422.jpg 
Views:	52 
Size:	208.4 KB 
ID:	152503


    A2000 can fit separate ram and ide boards stacked. A1000 maybe or not.

    RAM with MC68HC000 on board(45€) (-3€ without cpu)
    2 pcs V68 available. V6x have both config in and out, these have 4-pin header with two grounds.)

    IDE v425i with mc68hc000p10(45€): (-3€ without cpu.)
    1 pcs
    Click image for larger version. 

Name:	IMG_20180207_110924.jpg 
Views:	329 
Size:	207.0 KB 
ID:	133891
    Click image for larger version. 

Name:	IMG_20180819_102308-1280x463.jpg 
Views:	307 
Size:	171.3 KB 
ID:	138484

    Special ide-cf adapter for v4xx for 10 euros or with a v4xx board +5 euros. CF-card will be against the 68000 cpu chip and upside down. Female header or female header with extended pins on other side for connection of other ide bus device. Photo at post #461)
    Click image for larger version. 

Name:	IMG_20191123_215852.jpg 
Views:	31 
Size:	179.5 KB 
ID:	151555
    a few: with clearance for v4xx+v6x ram combo. 5 pcs for v4xx without ram board, 0 pcs with clearance for soldered combination ide+ram units, 0 with extended pins.

    Click image for larger version. 

Name:	Studio_20161003_141455.jpg 
Views:	808 
Size:	165.1 KB 
ID:	112955 Click image for larger version. 

Name:	IMG_20171031_182857.jpg 
Views:	384 
Size:	98.4 KB 
ID:	127942

    PCB: 5€ ram v67, 6€ ide v425i

    RAM homepage http://mkl211015.altervista.org/ram68k/

    8MB v59 and (v6x) (/ with ide board) info: a posting in this same thread.
    Ide info below in this post.

    (link to old thread for ram )

    Might include wires and pin header for int2 and ovr connection.

    Pin 20 on ide board has same voltage as cpld, 3.3 volt regulator on v425 board max. 300mA. Some CF adapters have diodes on supply lines, the floppy power input can be used on those (maybe jumper diodes to drop +5v to +3.3v).

    Pin 20 can be removed for 80-wire ide cables.



    Information about these home made IDE interfaces
    WWW: http://www.mkl211015.altervista.org/ide/ide68k.html


    Summary: Plugs to 68K socket, one 40-pin (or 39-pin) connector, "cf" versions also have cf connector
    Autoboots using A600's KS-ROM with driver for A600's ide interface (40.063/37.350/37.300)

    User needs to connect two (3 in 'cfidecp') signals to Amiga mainboard. A ground wire alongside with signal wires is recommended if the signal wires are not short and following ground trace on amiga pcb to reduce EMI caused by loop inductance.

    Cyberfred91's picture of placing a v402 board and cpu on A500 board (R8A1).
    (Click the following attach link if the thumbnail doesn't show up)
    Attachment 118080 Click image for larger version. 

Name:	a500+IMGP1500.jpg 
Views:	461 
Size:	161.6 KB 
ID:	133893


    Some pictures:
    http://imgur.com/a/dWuGu https://imgur.com/a/CCtYc

    A600 cf adapter
    -a few pcs: A600 Internal CF-card adapters to IDE connector 15 eur/pce.
    http://www.mkl211015.altervista.org/ide2cf/a6i2cf.html
    Version with also a extension header on top (for hard-disk cable or other adapter) 15€ /pce. Other guide "wing" of cf socket is removed to make space for top header connector.

    Mouse adapters
    -0 pcs stock Amiga ps/2 mouse adapters with 10pin header, 15€
    -upto 7 pcs, without header, long body right angle db9 connector, 20€
    PS/2 mouse adapter, Version for Atari ST for sale at Atari ST section.http://www.amibay.com/showthread.php...quot-firmware)

    Other items, Riser cards

    LINK 68000 cpu:s
    LINK SOJ RAM to DIP-20 footprint adapters with 1M x 4 drams
    LINK "riser" cards for 68000 socket, a500 side slot 86-pin edge
    LINK adapter board TV-frequency-VGA-in+stereo-in -> SCART-socket-connector-out
    LINK 27c4096 to 27c400/800/160, plcc denise to dip socket adapter
    LINK 2x 29f040 flash plcc to 27c800 dip socket
    LINK ps2 mouse adapter for Atari ST
    LINK DCN-2692 (cbm-1581 'clone') v0.15 boards, without cia,wd1772, or rom


    Shipping
    50 gram priority untracked 2.40€ europe, 3.60€ world
    Larger than 25 x 35.3 x 3 cm packages cost extra.
    Registered mail (signed for) with shipping code , + extra fee 11.90€ added to priority mail cost.
    Exprès letter up to 250 gr/over 3cm
    (not signed for, has shipping code): europe 16.90€, world wide €20.90. Item tracking available for the following countries: Belgium Brazil Canada Denmark France Germany Ireland Iceland Luxembourg The Netherlands Portugal Spain Sweden Switzerland

    Payments
    My E-mail and paypal address: mlvhct@gmail.com
    1. Paypal "gift" (send your shipping address by PM) or add fees for (ordinary) paypal.
    1B. if sending usd, check that both sending and receiving amounts are in usd (not receiving to euro balance)
    2. "Euro transfer" to bank account with IBAN (+ BIC) number (and other needed data.)
    Attached Thumbnails Attached Thumbnails 20180708_233903-1.jpg  
    Last edited by mkl; 12th February 2020 at 09:08. Reason: Update

  2. #2
    BANNED StrontiumDog's Avatar
    Join Date
    Aug 2009
    Country
    United Kingdom
    Region:
    The Willen Lake
    Posts
    3,636
    Feedback
    195 (100%)

    Default

    PM sent

    1 CF Card (A600/A1200)
    2 Mouse adapters

    [EDIT]

    Payment sent
    Last edited by StrontiumDog; 20th June 2010 at 21:11.

  3. #3
    Inactive Member Eamoe's Avatar
    Join Date
    Oct 2009
    Country
    Switzerland
    Region:
    Lake Geneva
    Posts
    116
    Feedback
    13 (100%)

    Default

    PM sent

    1 CF Card (A600/A1200)

  4. #4
    Extr3m3ly l33t Amibayer!
    Staff Moderator
    mfilos's Avatar
    Join Date
    Mar 2008
    Country
    Greece
    Region:
    Glyfada/Athens
    Age
    41
    Posts
    2,637
    Feedback
    72 (100%)

    Default

    I would love some pictures of CFIDE68K V296 mate
    Btw, is the current version of A600/1200 Internal CF-card adapters to IDE connector, the same as the one I got from you some time ago?

    Visit my Amiga Blog: http://www.mfilos.com
    - A600: Vampire V2, 128MB, A604n, 16GB CF, Indivision ECS, RapidRoad USB, Ratte's auto RTG/ECS switch, Gotek w/HxC-LCD + Slim floppy (internal)

  5. #5
    Amibayer! Crumb's Avatar
    Join Date
    May 2008
    Country
    Madrid, Spain
    Age
    40
    Posts
    168
    Feedback
    6 (100%)

    Default

    @mkl

    Does the IDE adaptor work on A2000 with accelerators? Does the clockport interface work? What's the maximum length of the IDE cable that could be used?

    Any plans for this board with fastram? http://www.students.tut.fi/~leinone3/ide/im718.png
    Amiga roolz

  6. #6

    Default

    I'll take two mouseadapters.

    Sending you a PM.

  7. #7
    Amiga Rules Amibayer! HeZoR's Avatar
    Join Date
    May 2010
    Country
    Greece
    Region:
    Nomos Pellis
    Age
    41
    Posts
    476
    Feedback
    33 (100%)

    Default

    2 Mice adapters

    PM sent
    Last edited by HeZoR; 21st June 2010 at 13:31.
    :Commodore:Amiga:rainbow:Rulez:boing:

  8. #8
    mkl's Avatar
    Join Date
    Jan 2009
    Country
    Finland
    Region:
    Tampere
    Posts
    284
    Feedback
    107 (100%)

    Default

    Quote Originally Posted by mfilos View Post
    I would love some pictures of CFIDE68K V296 mate
    Btw, is the current version of A600/1200 Internal CF-card adapters to IDE connector, the same as the one I got from you some time ago?


    Yes, the a600 adapter is that same version.

  9. #9
    Amibayer!
    Staff Moderator
    johnim's Avatar
    Join Date
    May 2010
    Country
    England
    Region:
    birmingham
    Age
    44
    Posts
    11,850
    Feedback
    153 (100%)

    Default

    can i have a mouse adapter please
    pm sent
    payment sent
    Last edited by johnim; 22nd June 2010 at 19:43.

  10. #10
    mkl's Avatar
    Join Date
    Jan 2009
    Country
    Finland
    Region:
    Tampere
    Posts
    284
    Feedback
    107 (100%)

    Default

    Both completed a600/1200 cf adapters and most mouse adapters sold.
    I'll send sold items on wednesday.

Page 1 of 87 123451151 ... LastLast

Similar Threads

  1. Closed Amiga PSU and PC mouse adapter
    By Puni/Void in forum Found Archive
    Replies: 1
    Last Post: 4th September 2012, 18:59
  2. Closed Amiga mouse / mouse adapter
    By moijk in forum Found Archive
    Replies: 7
    Last Post: 3rd February 2012, 11:37
  3. Sold Punchinello III ps2 mouse adapter
    By bazzaq in forum Sales Archive
    Replies: 10
    Last Post: 25th June 2010, 13:14
  4. Sold Micromys V3 PS/2 Mouse Adapter
    By everblue in forum Sales Archive
    Replies: 7
    Last Post: 18th June 2010, 22:29

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •